Analysis of Time–Varying Mesh Stiffness for the Planetary Gear System with Analytical and Finite Element Methods

Subject Areas : dynamics

Ali Shahabi ¹ , Amir Hosein Kazemian ²

1 - Department of Mechanical Engineering, University of Sistan and Baluchestan, Zahedan, Iran Nedayedanesh Institute of Higher Education of Hormozgan, Bandar Abbas, Iran
2 - Department of Mechanical Engineering, University of Sistan and Baluchestan, Zahedan, Iran

Received: 2020-08-08 Accepted : 2020-12-01 Published : 2022-03-01

Keywords:

References:

• Li, S., Wu, Q., and Zhang, Z., Bifurcation and Chaos Analysis of Multistage Planetary Gear Train, Nonlinear Dynamics, 75, No. 1-2,  2014, pp. 217-233.

 

• Chen, E., and Walton, D., The Optimum Design of KHV Planetary Gears With Small Tooth Differences, International Journal of Machine Tools and Manufacture, Vol. 30, No. 1, 1990, pp. 99-109.


• Lin, J., and Parker, R., Planetary Gear Parametric Instability Caused by Mesh Stiffness Variation, Journal of Sound and vibration, Vol. 249, No. 1, 2002, pp. 129-145.


• Sun, T., and Hu, H., Nonlinear Dynamics of a Planetary Gear System with Multiple Clearances, Mechanism and Machine Theory, Vol. 38, No. 12, 2003, pp. 1371-1390.


• Saxena, A., Parey, A., and Chouksey, M., Effect of Shaft Misalignment and Friction Force on Time Varying Mesh Stiffness of Spur Gear Pair, Engineering Failure Analysis, Vol. 49, 2015, pp. 79-91.


• Hao, Z., Xianghe, Y., Qingkai, H., and Hai, H., Dynamic Behaviors of Geared Rotor System in Integrally Centrifugal Compressor, Journal of Vibration Engineering & Technologies, Vol. 7, 2019, pp. 241-249.


• Parker, R. G., and Lin, J., Mesh Phasing Relationships in Planetary and Epicyclic Gears, Journal of Mechanical Design, Vol. 126, No. 2, 2004, pp. 365-370.


• Inalpolat, M., and Kahraman, A., A Dynamic Model to Predict Modulation Sidebands of a Planetary Gear Set Having Manufacturing Errors, Journal of Sound and Vibration, Vol. 329, 2010, pp. 371-393.


• Wei, S., Han, Q. K., Dong, X. J., Peng, Z. K., and Chu, F. L., Dynamic Response of a Single-Mesh Gear System with Periodic Mesh Stiffness and Backlash Nonlinearity Under Uncertainty, Nonlinear Dynamics, Vol. 89, No. 1, 2017, pp. 49-60.


• Ambarisha, V. K., and Parker, R. G., Nonlinear Dynamics of Planetary Gears Using Analytical and Finite element Models, Journal of Sound and Vibration, Vol. 302, No. 3, 2007, pp. 577-595.


• Li, C. H., Chiou, H. S., Hung, C., Chang, Y. Y., and Yen, C. C., Integration of Finite Element Analysis and Optimum Design on Gear Systems, Finite Elements in Analysis and Design, Vol. 38, No. 3, 2002, pp. 179-192.


• Chen, Z. G., Shao, Y. M., and Lim, T. C., Non-Linear Dynamic Simulation of Gear Response Under the Idling Condition, International Journal of Automotive Technology, Vol. 13, No. 4, 2012, pp. 541-552.


• Kahraman, A., Natural Modes of Planetary Gear Trains, Journal of Sound Vibration, Vol. 173, 1994, pp. 125-130.


• Kahraman, A., Load Sharing Characteristics of Planetary Transmissions, Mechanism and Machine Theory, 29, No. 8, 1994, pp. 1151-1165.


• Liu, L., Niu, J., and Li, X., Dynamic Analysis of Gear System Under Rractional-Order PID Control with the Feedback of Meshing Error Change Rate, Acta Mechanica, Vol. 229, 2018, 3833-3851


• Masoumi, A., Pellicano, F., Samani, F. S., and Barbieri, M., Symmetry Breaking and Chaos-Induced Imbalance in Planetary Gears, Nonlinear Dynamics, Vol. 80, 2015, pp. 561-582.


• Sainsot, P., Velex, P., and Duverger, O., Contribution of Gear Body to Tooth Deflections-a New Bidimensional Analytical Formula, Journal of Mechanical Design, Vol. 126, No. 4, 2004, pp. 748-752.


• Shen, Y., Yang, S., and Liu, X., Nonlinear Dynamics of a Spur Gear Pair with Time-Varying Stiffness and Backlash Based on Incremental Harmonic Balance Method, International Journal of Mechanical Sciences, Vol. 48, No. 11, 2006, pp. 1256-1263.


• Shi, J. F., Gou, X. F., and Zhu, L. Y., Modeling and Analysis of a Spur Gear Pair Considering Multi-State Mesh with Time-Varying Parameters and Backlash, Mechanism and Machine Theory, Vol. 134, 2019, pp. 582-603.


• Wang, J., and Howard, I., The Torsional Stiffness of Involute Spur Gears, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 218, No. 1, 2004, pp. 131-142.


• Zhou, X., Shao, Y., Lei, Y., and Zuo, M., Time-Varying Meshing Stiffness Calculation and Vibration Analysis for a 16DOF Dynamic Model with Linear Crack Growth in a Pinion, Journal of Vibration and Acoustics, Vol. 134, No. 1, 2012.


• Tian, X., Zuo, M. J., and Fyfe, K. R., Analysis of the Vibration Response of a Gearbox with Gear Tooth Faults. In ASME 2004 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers Digital Collection, 2004, pp. 785-793.


• Jin, G., Ren, W., Zhu, R., and Lu, F., Influence of Backlash on Load Sharing and Dynamic Load Characteristics of Twice Split Torque Transmission System, Journal of Vibration Engineering & Technologies, Vol. 7, 1999, pp. 565-577.


• Yang, D., and Sun, S., A Rotary Model for Spur Gear Dynamics, Journal of Mechanical Design, Vol. 107, No. 4, 1985, pp. 529-535.


• Lin, J., and Parker, R. G., Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration, Journal of Vibration and Acoustics, Vol. 121, 1999, pp. 316-321.