Multi-objective Optimization of Volute Springs using an Improved NSGA II

Subject Areas : optimization and simulation

navid moshtaghi yazdani ¹

1 - Department of Mechanical Engineering, University of Tehran, Iran

Received: 2020-03-29 Accepted : 2020-08-08 Published : 2020-12-01

Keywords:

References:

[1]     Schreier, J. R., Konrad, F., Standard Guide to U.S. World War II Tanks & Artillery, 1^st ed, Krause Publications,USA,1994,  pp. 154–196, ISBN: 0873412974.

[2]     Agachev, A. R., Daishev, R. A., Levin, S. F., et al., First-Level Dulkyn Gravitational Wave Detector, Vol. 52, No. 10, 2009, pp. 613–620, https://doi.org/10.1007/s11018-009-9316-1.

[3]     Wahl, A. M., Mechanical Springs, 2nd ed, McGraw Hill, New York, 1963.

[4]     Kazunori, K., Spring Standards by The Japan Spring Manufacturing Association and The Points in Designing, the Fourth. Hot Formed Volute Springs, Machine Design, Vol. 42, No. 6, 2002, pp. 97-101.

[5]     Sterne, B., Characteristics of the VOLUTE SPRING, SAE Technical Paper 420100, 1942, https://doi.org/10.4271/420100.

[6]     Sileikis, W., Volute Spring Design, Bulletin of Military Technical Academy, 2015, pp. 97-104.

[7]     Kirpichev, V. A., Akiljuk V. S., Surhuanova, Yu. N., and Karaneva, O. V., Residual Stresses and Fatigue Resistance of Cylindrical Volute Springs, VestnikSamarskogo Gosudarstvennogo Seriya Fisiko-MatematicheskieNauki, Vol. 2, No. 17, 2008, pp. 254-257,  https://doi.org/10.14498/vsgtu618.

[8]     Reck, C., Mueller, M., and Seipel, V., US Patent Application for a “Vehicle”, Docket No.20,070,173,078. Published on 26 July, 2007.

[9]     Peng, Q. I., Chen, Q., Hongbin, L., Jian, S. D., et al, A Novel Continuum Manipulator Design Using Serially Connected Double-Layer Planar Springs,  IEEE/ASME Transactions on Mechatronics, Vol. 21, No. 3, pp. 1281 – 1292.

[10]  Sharvari Dhote, Haitao, L., Zhengbao Y., Multi-Frequency Responses of Compliant Orthoplanar Spring Designs for Widening the Bandwidth of Piezoelectric Energy Harvesters, International Journal of Mechanical Sciences, Vol. 157–158, 2019, pp 684-691, ISSN 0020-7403, https://doi.org/10.1016/j.ijmecsci.2019.04.029.

[11]  John, J. P., Larry L. H., and Spencer, P. M., Ortho-Planar Linear-Motion Springs, Mechanism and Machine Theory, Vol. 36, No. 11-12, 2001, pp. 1281-1299,https://doi.org/10.1016/S0094 114X(01) 00051-9.

[12]  Ruizhou, W., Xianmin, Z., Optimal Design of a Planar Parallel 3-DOF Nanopositioner with Multi-Objective, Mechanism and Machine Theory, Vol. 112, 2017, pp. 61-83, ISSN 0094-114X, https://doi.org/10.1016/j.mechmachtheory.2017.02.005.

[13]  Arora, J. S., Introduction to Optimum Design,5^th ed, Elsevier Academic Press, San Diego, California, 2004, ISBN: 9780120641550

Holland, J. H., Adaption in Natural and Artificial Systems,1^st ed, MIT Press, Cambridge, MA, 1992.