Investigation of Magnitude and Position of Maximum von Mises Stress in The Cylindrical Contact Problems
Subject Areas :
advanced manufacturing technology
Hasan Heirani
1
,
Reza Naseri
2
1 - Department of Mechanical Engineering, Faculty of Engineering, Bozorgmehr University of Qaenat, Qaen, Iran.
2 - Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran.
Received: 2022-09-13
Accepted : 2023-02-21
Published : 2023-09-01
Keywords:
References:
Boresi, A. P., Schmidt, R. J., and Sidebottom, O. M., Advanced Mechanics of Materials, 5th ed, John Wiley and Sons, New York, USA, 1993, Chap. 18.
Beer, F. P., Johnston, E. R., DeWolf, J. T., and Mazurek, D. F., Mechanics of Materials, 7th ed, McGraw-Hill, New York, USA, 2014, Chap. 7.
Heirani, H., Farhangdoost, K., Effect of Friction Coefficient and Maximum Contact Pressure on The Spalling Depth of Gear Teeth Flank, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, 2018, pp. 63-68, DOI: 10.1007/978-981-13-0411-8_6.
Johnson, K. L., Contact Mechanics, Cambridge University Press, Cambridge, UK, 1985, Chap. 4.
Glodez, S., Winter, H., and Stuwe, H. P., A Fracture Mechanics Model for The Wear of Gear Flanks by Pitting, Wear, Vol. 208, No. 1-2, 1997, pp. 177-183, DOI: 1016/S0043-1648(97)00008-2.
Glodez, S., Ren, Z., Modelling of Crack Growth Under Cyclic Contact Loading, Theoretical and Applied Fracture Mechanics, Vol. 30, No. 2, 1998, pp. 159-173, DOI: 1016/S0167-8442(98)00053-6.
Glodez, S., Ren, Z., and Flasker, J., Simulation of Surface Pitting Due to Contact Loading, International Journal for Numerical Method in Engineering, Vol. 43, No. 1, 1998, pp. 33-50, DOI: 1002/(SICI)10970207(19980915)43:1<33::AID-NME410>3.0.CO;2-Z.
Glodez, S., Abersek, B., Flasker, J., and Ren, Z., Evaluation of the Service Life of Gears in Regard to Surface Pitting, Engineering Fracture Mechanics, Vol. 71, No. 4-6, 2004, pp. 429-438, DOI: 1016/S0013-7944(03)00049-3.
Aslantas, K., Tasgetiren, S., A Study of Spur Gear Pitting Formation and Life Prediction, Wear, Vol. 257, No. 11, 2004, pp. 1167-1175, DOI: 1016/j.wear.2004.08.005.
Fajdiga, G., Glodez, S., and Kramar, J., Pitting Formation Due to Surface and Subsurface Initiated Fatigue Crack Growth in Contacting Mechanical Elements, Wear, Vol. 262, No. 9-10, 2007, pp. 1217-1224, DOI: 1016/j.wear.2006.11.016.
Francois, H., Gilbert, H., Damien, H., Mikael, G., and Thomas, B., CDM Approach Applied to Fatigue Crack Propagation on Airframe Structural Alloys, Procedia Engineering , Vol. 2, No. 1, 2010, pp. 1403-1412, DOI: 1016/j.proeng.2010.03.152.
Wei, P., Zhou, H., Liu, H., Zhu, C., Wang, and W., Deng, G., Modeling of Contact Fatigue Damage Behavior of A Wind Turbine Carburized Gear Considering Its Mechanical Properties and Microstructure Gradients, International Journal of Mechanical Sciences, Vol. 156, 2019, pp. 283-296, DOI: 1016/j.ijmecsci.2019.04.004.
Liu, H., Wang, W., Zhu, C., Jiang, C., Wu, W., and Parker, R. G., A Microstructure Sensitive Contact Fatigue Model of A Carburized Gear, Wear, Vol. 436, 2019, pp. 203035, DOI: 1016/j.wear.2019.203035.
He, H., Liu, H., Zhu, C., and Tang, J., Study on the Gear Fatigue Behavior Considering the Effect of Residual Stress Based on The Continuum Damage Approach, Engineering Failure Analysis, Vol. 104, 2019, pp. 531-544, DOI: 1016/j.engfailanal.2019.06.027.
Li, W., Deng, S., and Liu, B., Experimental Study on The Influence of Different Carburized Layer Depth on Gear Contact Fatigue Strength, Engineering Failure Analysis, Vol. 107, 2020, pp. 104225, DOI: 1016/j.engfailanal.2019.104225.
Guan, J., Wang, L., Zhang, C., and Ma, X., Effects of Non-Metallic Inclusions on The Crack Propagation in Bearing Steel, Tribology International, Vol. 106, 2017, pp. 123-131, DOI: 1016/j.triboint.2016.10.030.
Heirani, H., Farhangdoost, K., Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank Under Cyclic Contact Loading, Journal of Solid Mechanics, Vol. 9, No. 3, 2017, pp. 587-598, DOI: 1001.1.20083505.2017.9.3.10.9.
Sun, P., An, Z., and Jiang, W., Analysis of Non-Hertz Contact Stress and Bearing Capacity on Meshing Pairs in a Real-Time Non-Clearance Precision Ball Transmission, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, No. 6, 2018, pp. 1-11, DOI: 1007/s40430-018-1197-2.
Kohn, A. O., Silva, F. A., A Numerical and Analytical Study of The Stress Field Generated by The Contact Between a Rail and a Wheel, SN Applied Sciences, Vol. 2, No. 7, 2020, pp. 1-8, DOI: 10.1007/s42452-020-3044-1.
Budynas, R., Nisbett, K., Shigley's Mechanical Engineering Design, 10th ed, McGraw-Hill, New York, USA, 2015, Chap. 3.
Qin, W. J., Guan, C. Y., An Investigation of Contact Stresses and Crack Initiation in Spur Gears Based on Finite Element Dynamics Analysis, International Journal of Mechanical Sciences, Vol. 83, 2014, pp. 96-103, DOI: 1016/j.ijmecsci.2014.03.035.
