Fatigue Crack Growth in Thin-Wall Pipes Subjected to Bending
Subject Areas : Mechanical Engineering
1 - Department of Engineering,
Research Institute of Petroleum Industry
Keywords:
Abstract :
[1] Shahani, A. R., Habibi S. E., Stress Intensity Factors in Hollow Cylinder Containing a Circumferential Semi-Elliptical Crack Subjected to Combined Loading, International Journal of Fatigue, Vol. 291, No. 1, 2007, pp. 128–140. doi: 10.1016/j.ijfatigue.2006.01.017.
[2] Lin X. B., Smith, R. A., Fatigue Growth Prediction of Internal Surface Cracks in Pressure Vessels, International Journal od Press Vessel Technology. Vol. 120, No. 1, 1998, pp. 17–23, doi:10.1115/1.2841878.
[3] Underwood J., Stress Intensity Factor for Internally Pressurized Thick-Walled Cylinders: Stress Analysis Growth Cracks, ASTM STP, Vol. 513, 1972, pp. 59–70.
[4] Raju, I. S., Newman, J. C., Stress-Intensity Factor for Internal and External Surface Cracks in Cylindrical Vessels, International Journal of Press Vessel Technology., Vol. 104, No. l, 1982, pp. 293–298.
[5] Couroneau, N., Royer, J., Simplified Model for the Fatigue Growth Analysis of Surface Cracks in Round Bars Under Mode I, International Journal of Fatigue, Vol. 20, No. 10, 2010, pp. 711–718, doi:10.1016/S0142-1123(98)00037-1.
[6] Carpinteri, A., Brighenti R., A Three-Parameter Model for Fatigue Behavior of Circumferential Surface Flaws in Pipes, International Journal of Mechanical Science, Vol. 42, No. 7, 2000, pp. 1255–1269, doi:10.1016/S0020-7403(99)00083-1
[7] Pook, L. P., On Fatigue Crack Paths, International Journal of Fatigue, Vol. 17, No. 1, 1995, pp. 5–13, doi:10.1016/0142-1123(95)93045-4.
[8] Carpinteri, A., Brighenti, R., and Spagnoli, A., Part-Through Cracks in Pipes Under Cyclic Bending, Nuclear Engineering and Design., Vol. 185, No. 1, 1998, pp. 1–10, doi:10.1016/S0029-5493(98)00189-7.
[9] Bergman, M., Stress Intensity Factors for Circumferential Surface Cracks in Pipes, Fatigue & Fracture of Engineering Materials & Structures, Vol. 18, No. 10, 1995, pp. 1155–1172. doi:10.1111/j.1460-2695. 1995.tb00845. x.
[10] Peng. D., Wallbrink, C., and Jones, R., An Assessment of Stress Intensity Factors for Surface Flaws in a Tubular Member, Engineering Fracture Mechanics, Vol. 72, No. 3, 2005, pp. 357–371. doi: 10.1016/j.engfracmech.2004.04.001.
