Investigation of the Effect of V-Clamp Band Design Parameters on the Bending and Axial Stiffness of the Flanged Joints

Subject Areas : aerospace

SeyyedAbdolSajjad Borhani ¹ , AliAkbar Lotfi neyestanak ² , Ali davar ³

1 - Department of Mechanical Engineering, Yadegar-e-Imam Khomeini (RAH) Shahr-e-Rey Branch, Islamic Azad University, Tehran, Iran
2 - Department of Mechanical Engineering, Yadegar-e-Imam Khomeini (RAH), Shahr-e-Rey Branch, Islamic Azad University, Tehran, Iran
3 - Composite Research Centre, Malek Ashtar University, Tehran, Iran

Received: 2019-03-02 Accepted : 2019-08-04 Published : 2019-12-01

Keywords:

References:

[1]    Qin, Z., Cui, D., Yan, S., and Chu, F., Hysteresis Modeling of Clamp Band Joint with Macro-Slip, Mechanical Systems and Signal Processing, Vol. 66, 2016, pp. 89-110.

[2]    Sahboun, S. M., Barrans, S. M., Simulating Torsional Slip in V-band Clamp Joints, Applied Mechanics and Materials, Vol. 798, 2015, pp. 53-58.

[3]    Cui, D., Yan, S., Li, J., Qin, Z., and Guo, X., Dynamic Analysis of Satellite Separation Considering the Flexibility of Interface Rings, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 229, No. 10, 2015, pp. 1886-1902.

[4]    Barrans, S. M., Khodabakhshi, G., and Muller, M., Classical and Numerical Approaches to Determining V-Section Band Clamp Axial Stiffness, Open Engineering, Vol. 5, No. 1, 2014, pp. 99-110.

[5]    Li, J., Yan, S., and Tan, X., Dynamic-Envelope Analysis of Clamp-Band Joint Considering Pyroshock of Satellite Separation, Journal of Spacecraft and Rockets, Vol. 51, No. 5, 2014, pp. 1390-1400.

[6]    Qin, Z. Y., Yan, S. Z., and Chu, F. L., Influence of Clamp Band Joint On Dynamic Behavior of Launching System in Ascent Flight, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 228, No. 1, 2014, pp. 97-114.

[7]    Qin, Z. Y., Yan, S. Z., and Chu, F. L., Analytical Modeling of Clamp Band Joint Under External Bending Moment, Aerospace Science and Technology, Vol. 25, No. 1, 2013, pp. 45-55.

[8]    Li, J. L., Yan, S. Z., and Tan, X. F., Modeling and Simulation of Clamp Band Dynamic Envelope in a LV/SC Separation System, Applied Mechanics and Materials, Vol. 141, 2012, pp. 359-363.

[9]    Qin, Z. Y., Yan, S. Z., and Chu, F. L., Dynamic Characteristics of Launch Vehicle and Spacecraft Connected by Clamp Band, Journal of Sound and Vibration, Vol. 330, No. 10, 2011, pp. 2161-2173.

[10] Qin, Z. Y., Yan, S. Z., and Chu, F. L., Dynamic Analysis of Clamp Band Joint System Subjected to Axial Vibration, Journal of sound and vibration, Vol. 329, No. 21, 2010, pp. 4486-4500.

[11] Rome, J., Goyal, V., and Martino, N., Techniques for Finite Element Analysis of Clamp Band Systems, In 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 17th AIAA/ASME/AHS Adaptive Structures Conference 11th AIAA No, 2009, pp. 2353.

[12] Shoghi, K., Rao, H. V., and Barrans, S. M., Stress in A Flat Section Band Clamp, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 217, No. 7, 2003, pp. 821-830.

[13] Klarer, P. R., Vaughn, M. R., Gilbride, J. F., Baty, R. S., and Adams, J. L., Design for an Internal Circular Compression Band Restraint Device (Marman Clamp, V-Band). Sandia national Laboratories, SAND2002-2744J, 2002.

[14] Lancho, M., Larrauri, J., and Gomez-Molinero, V., CRSS: A Separation System for Launching Very Heavy Payloads, Acta Astronautica, Vol. 47, No. 2-9, 2000, pp. 153-162.