Studying the Shear and Discharge Rate of Proteins in Microfluidic Junctions, Under Electrokinetic EffectsStudying the Shear and Discharge Rate of Proteins in Microfluidic Junctions, Under Electrokinetic Effects

Subject Areas : Mechanical Engineering

Babak  kamali Doust Azad ¹ (Department of Mechanical Engineering, Iran University of Science and Technology, Iran)
Sasan  Asiaei ² (Department of Mechanical Engineering, Iran University of Science and Technology, Iran)
Borhan  Beigzadeh ³ (Department of Mechanical Engineering, Iran University of Science and Technology, Iran)

Received: 2016-03-24 Accepted : 2016-05-23 Published : 2016-12-24

Keywords:

References:

[1]   W. L. W. Hau, D. W. Trau, N. J. Sucher, M. Wong, and Y. Zohar, “Surface-chemistry Technology for Microfluidics,” J. Micromechanics Microengineering, Vol. 13, No. 2, pp. 272, 2003.

[2]   A. D. Stroock, M. Weck, D. T. Chiu, W. T. S. Huck, P. J. A. Kenis, R. F. Ismagilov, and G. M. Whitesides, “Patterning Electro-osmotic Flow With Patterned Surface Charge,” Phys. Rev. Lett., Vol. 84, No. 15, pp. 3314, 2000.

[3]   Y. Takamura, H. Onoda, H. Inokuchi, S. Adachi, A. Oki, and Y. Horiike, “LowVoltage Electroosmosis Pump for Stand Alone Microfluidics Devices,” Electrophoresis, Vol. 24, No. 1-2, January 2003, pp. 185–192.

[4]   L. Bousse, C. Cohen, T. Nikiforov, A. Chow, A. R. Kopf-Sill, R. Dubrow, and J. W. Parce, “Electrokinetically Controlled Microfluidic Analysis Systems,” Annu. Rev. Biophys. Biomol. Struct., Vol. 29, No. 1, pp. 155–181, 2000.

[5]   A. Ajdari, “Transverse Electrokinetic and Microfluidic Effects in Micropatterned Channels: Lubrication Analysis for Slab Geometries,” Phys. Rev. E, vol. 65, No. 1, pp. 16301, 2001.

[6]   L. M. Lee, W. L. W. Hau, Y.-K. Lee, and Y. Zohar, “In-Plane Vortex Flow in Microchannels Generated by Electroosmosis With Patterned Surface Charge,” J. Micromechanics Microengineering, Vol. 16, No. 1, pp. 17, 2006.

[7]   A. S. W. Ng, W. L. W. Hau, Y.-K. Lee, and Y. Zohar, “Electrokinetic Generation of Microvortex Patterns in a Microchannel Liquid Flow,” J. Micromechanics Microengineering, Vol. 14, No. 2, pp. 247, 2004.

[8]   G. Whitesides and A. Stroock, “Flexible Methods for Microfluidics [J],” Phys Today, Vol. 54, No. 6, pp. 42–48, 2001.

[9]   H. A. Stone, A. D. Stroock, and A. Ajdari, “Engineering Flows in Small Devices: Microfluidics Toward a Lab-On-A-Chip,” Annu. Rev. Fluid Mech., Vol. 36, pp. 381–411, 2004.

[10] D. Marro, Y. N. Kalia, M. B. Delgado-Charro, and R. H. Guy, “Contributions of Electromigration and Electroosmosis to Iontophoretic Drug delivery,” Pharm. Res., Vol. 18, No. 12, pp. 1701–1708, 2001.

[11] C. Wiles and P. Watts, “Improving Chemical Synthesis Using Flow Reactors,” 2007.

[12] A. K. Vijh, “Electrochemical Treatment of Tumors (ECT): Electroosmotic Dewatering (EOD) as the Primary Mechanism,” Dry. Technol., Vol. 17, No. 3, pp. 586–596, 1999.

[13] S. T. P. YK Ng  E, “CFD Analysis of Double-Layer Microchannel Conjugate Parallel Liquid Flows With Electric Double-Layer Effects,” Numer. Heat Transf. Part A Appl., Vol. 40, No. 7, pp. 735–749, 2001.

[14] E. Y. K. Ng and S. T. Tan, “Computation of Three-Dimensional Developing Pressure-Driven Liquid Flow in a Microchannel With EDL Effect,” Numer. Heat Transf. Part A, vol. 45, No. 10, pp. 1013–1027, 2004.

[15] S. T. Tan and E. Y. K. Ng, “Numerical Analysis of EDL Effect on Heat Transfer Characteristic of 3-D Developing Flow in a Microchannel,” Numer. Heat Transf. Part A Appl., Vol. 49, No. 10, pp. 991–1007, 2006.

[16] E. Y. K. Ng and S. T. Tan, “Study of EDL Effect on 3-D Developing Flow in Microchannel With Poisson–Boltzmann and Nernst–Planck models,” Int. J. Numer. Methods Eng., Vol. 71, No. 7, pp. 818–836, 2007.

[17] H. Andersson, W. Van Der Wijngaart, P. Nilsson, P. Enoksson, and G. Stemme, “A Valve-less Diffuser Micropump for Microfluidic Analytical Systems,” Sensors Actuators B Chem., Vol. 72, No. 3, pp. 259–265, 2001.

[18] T. E. McKnight, C. T. Culbertson, S. C. Jacobson, and J. M. Ramsey, “Electroosmotically Induced Hydraulic Pumping With Integrated Electrodes on Microfluidic Devices,” Anal. Chem., vol. 73, No. 16, pp. 4045–4049, 2001.

[19] P. C. H. Li and D. J. Harrison, “Transport, Manipulation, and Reaction of Biological Cells On-Chip Using Electrokinetic Effects,” Anal. Chem., Vol. 69, No. 8, pp. 1564–1568, 1997.

[20] S. Ebrahimi, A. Hasanzadeh-Barforoushi, A. Nejat, and F. Kowsary, “Numerical Study of Mixing and Heat Transfer in Mixed Electroosmotic/Pressure Driven Flow Through T-Shaped Microchannels,” Int. J. Heat Mass Transf., Vol. 75, pp. 565–580, 2014.

[21] A. Soleymani, E. Kolehmainen, and I. Turunen, “Numerical and Experimental Investigations of Liquid Mixing in T-Type Micromixers,” Chem. Eng. J., Vol. 135, pp. S219–S228, 2008.

[22] Y. Ai, S. Park, J. Zhu, X. Xuan, A. Beskok, and S. Qian, “DC Electrokinetic Particle Transport in an L-Shaped Microchannel,” Langmuir, Vol. 26, No. 4, pp. 2937–2944, 2009.

[23] S. Bhopte, B. Sammakia, and B. Murray, “Geometric Modifications to Simple Microchannel Design for Enhanced Mixing,” In 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM, 2008, pp. 937–944.

[24] E. A. Mansur, 王运东, 戴猷元, E. A. Mansur, W. Yun-Dong, and D. A. I. You-Yuan, “Computational Fluid Dynamic Simulation of Liquid− Liquid Mixing in a Static Double-T-Shaped Micromixer,” 过程工程学报, Vol. 8, No. 6, 2008.

[25] J. G. Santiago, “Electroosmotic Flows in Microchannels With Finite Inertial and Pressure Forces,” Anal. Chem., Vol. 73, No. 10, pp. 2353–2365, 2001.

[26] E. J. Lim, T. J. Ober, J. F. Edd, S. P. Desai, D. Neal, K. W. Bong, P. S. Doyle, G. H. McKinley, and M. Toner, “Inertio-Elastic Focusing of Bioparticles in Microchannels at High Throughput.,” Nat. Commun., Vol. 5, pp. 4120, 2014.

[27] L. B. Leverett, J. D. Hellums, C. P. Alfrey, and E. C. Lynch, “Red Blood Cell Damage by Shear Stress,” Biophys. J., Vol. 12, No. 3, pp. 257, 1972.

[28] O. K. Baskurt, “Red Blood Cell Mechanical Stability,” Engineering, Vol. 4, No. 10, pp. 8, 2013.

[29] G. M. Yezaz Ahmed and A. Singh, “Numerical Simulation of Particle Migration in Asymmetric Bifurcation Channel,” J. Nonnewton. Fluid Mech., Vol. 166, No. 1–2, pp. 42–51, 2011.

[30] A. N. Frumkin, O. A. Petrii, B. B. Damaskin, J. O. M. Bockris, B. E. Conway, and E. Yeager, “Comprehensive Treatise of Electrochemistry,” Vol. 1 Plenum, New York, pp. 246–251, 1980.

[31] F. F. Reuss, “Sur un Nouvel Effet De L’électricité Galvanique,” Mem. Soc. Imp. Natur. Moscou, Vol. 2, pp. 327–337, 1809.

[32] H. Bruus, Theoretical Microfluidics. OUP Oxford, 2008.

[33] D. Li, Electrokinetics in Microfluidics. Academic, 2004.

[34] R. H. Pletcher, J. C. Tannehill, and D. Anderson, Computational Fluid Mechanics and Heat Transfer, Third Edition. CRC Press, 2012.

[35] F. Bianchi, R. Ferrigno, and H. H. Girault, “Finite Element Simulation of an Electroosmotic-Driven Flow Division at a T-Junction of Microscale Dimensions,” Anal. Chem., Vol. 72, No. 9, pp. 1987–1993, 2000.