Bone Surface Model Development Based on Point Clouds Extracted From CT Scan Images

Subject Areas : Mechanical Engineering

I. Asheghi Bonabi ¹ , S. J. Hemmati ²

1 - Department of Mechanical Engineering, University of Hormozgan, Iran
2 - Department of Mechanical Engineering, University of Hormozgan, Iran

Received: 2016-01-16 Accepted : 2017-03-08 Published : 2017-08-24

Keywords:

References:

[1]       Subburaj, K., “CT Scanning Techniques and Applications”, INTECH, 2011, chapt. 1.

[2]       Chiffre, L., Camignato, S., Kruth, J. -P., Schmitt, R., and Weckenmann, A., “Industrial Applications of Computed Tomography”, CIRP. Annals-Manufacturing Technology, Vol. 63, 2014, pp. 655-677.

[3]       Sun, W., Starly, B., Nam, J. and Darling, A., “Bio-CAD Modeling and its Applications in Computer Ttissue Engineering,” Comuter-Aided Design, Vol. 37, No. 11, 2005, pp. 1097-1114.

[4]       Viceconti, M., Casali, M., Massari, B., Cristofolini, L., Bassini, S., and Toni, A., “The Standardized Femur Program Proposal for a Reference Geometry to be used for the Creation of Finite Element Models of the Femur”, J. Biomech. Vol. 29, 1996, pp. 525-535.

[5]       Viceconti, M., Zannoni, C., and Pierotti, L., “TRI2SOLID: an Application of Reverse Engineering Methods to the Creation of CAD Models of Bone Segments”, Comput. Methods and Progr. in Biomed., Vol. 56, 1998, pp. 211-220.

[6]       Lee, T. Y., Lin, C. H., “Feature-Guided Shape-Based Image Interpolation,” IEEE Trans.on Med. Imaging, Vol. 21, 2002, pp. 1479-1489.

[7]       Gonzalez, R. C., Woods, R. E., and Eddins, S. L., “Digital Image Processing Using Matlab”, 2^nd ed., Pearson Education., 2010, Chapt. 10.

[8]       Rajon, D. A., Bolch, W. E., “Marching Cube Algorithm: Review and Trilinear Interpolation Adaptation for Image-Based Dosimetric Models. Comput”, Med. Imaging and Graph., Vol. 27, 2003, pp. 411-435.

[9]       Ma, D., Lin, F., and Chua, C. K., “Rapid Protyping Applications in Medicine Part 1: NURBS-Based Volume Modelling”, Int. J. of Adv. Manuf. Technol.,Vol. 18, 2001, pp. 103-117.

[10]    Yoo, D. J., “Three-Dimensional Surface Reconstruction of Human Bone using a B-spline Based Interpolation Approach”, Comput. Aided Des., Vol. 43, 2011, pp. 934-947.

[11]    Lai, J. Y., Ueng, W. D., “Reconstruction of Surface of Revolution from Measured Points”, Comput. in Ind.,Vol. 41, 2000, pp. 147-161.

[12]    Park, H., “An Approximate Lofting Approach for B-Spline Surface Fitting to Functional Surfaces”, Int. J. of Adv. Manuf. Thechnol.,Vol. 18, 2001, pp. 474-482.

[13]    Ueng, W. D., Lai, J. Y., and Doong, J. L., “Sweep-Surface Reconstruction from Three-Dimensional Measured Data”, Comput. Aided Des.,Vol. 30, 1998, pp. 791-805.

[14]    Ma, W., Kruth, J. P., “NURBS Curve and Surface Fitting for Reverse Engineering”, Int. J. Adv. Manuf. Technol.,Vol. 14, 1998, pp. 918-927.

[15]    Piegl, L. A., Tiller, W., “Parametrization for Surface Fitting in Reverse Engineering”, Comput. Aided Des., Vol. 33, 2001, pp. 593-603.

[16]    Yuwen, S., “B-spline Surface Reconstruction and Direct Slicing from Point Clouds”, Int. J. Adv. Manuf. Technol.,Vol. 27, 2006, pp. 918-924.

[17]    Derakhshan, A., “Automatic Extraction of the Machining Program from Raster Image”, MSc Dissertation, Mech. Eng. Dept., Univ. of Hormozgan, 2013.

[18]    Piegl, L. A., Tiller, W., “The NURBS Book”, Berlin, Springer Press, 1997, chaps.5, 9, 10.