Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology

Subject Areas : Mechanical Engineering

M. Vahdati ¹ , R. A. Mahdavinejad ² , S. Amini ³

1 - Department of Mechanical Engineering, University of Tehran, Iran
2 - Department of Mechanical Engineering, University of Tehran, Iran
3 - Department of Mechanical Engineering, University of Kashan, Iran

Received: 2014-09-01 Accepted : 2014-12-06 Published : 2015-03-01

Keywords:

References:

[1]   Leszak, E., U.S. Patent Application for a “Apparatus and process for incremental dieless forming”, Docket No. 3342051A, filed 1967.

[2]    Kitazawa, K., Wakabayashi, A., Murata, K., and Yaejima, K., “Metal-flow phenomena in computerized numerically controlled incremental stretch-expanding of aluminium sheets”, Journal of Japan Institute of Light Metals, Vol. 46, 1996, pp. 65-70.

[3]   Petek, A., Jurisevic, B., Kuzman, K., and Junkar, M., “Comparison of alternative approaches of single point incremental forming processes”, Journal of Materials Processing Technology, Vol. 209, 2009, pp. 1810-1815.

[4]   Duflou, J., Tunckol, Y., Szekeres, A., and Vanherck, P., “Experimental study on force measurements for single point incremental forming”, Journal of Materials Processing Technology, Vol. 189, 2007, pp. 65-72.

[5]   Jeswiet, J., Micari, F., Hirt, G., Bramley, A., Duflou, J., and Allwood, J., “Asymmetric single point incremental forming of sheet metal”, CIRP Annals - Manufacturing Technology, Vol. 54, No. 2, 2005, pp. 623-649.

[6]   Thibaud, S., BenHmida, R., Richard, F., and Malécot, P., “A fully parametric toolbox for the simulation of single point incremental sheet forming process: Numerical feasibility and experimental validation”, Simulation Modelling Practice and Theory, Vol. 29, 2012, pp. 32-43.

[7]   Micari, F., Ambrogio, G., and Filice, L., “Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends”, Journal of Materials Processing Technology, Vol. 191, 2007, pp. 390-395.

[8]   Ambrogio, G., Costantino, I., De Napoli, L., Filice, L., and Muzzupappa, M., “Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation”, Journal of Materials Processing Technology, Vol. 153C/154C, 2004, pp. 501-507.

[9]   Allwood, J. M., King, G. P. F., and Duflou, J., “A structured search for applications of the incremental sheet-forming process by product segmentation”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 219, No. 2, 2005, pp. 239-244.

[10]     Ambrogio, G., Cozza, V., Filice, L., and Micari, F., “An analytical model for improving precision in single point incremental forming”, Journal of Materials Processing Technology, Vol. 191, 2007, pp. 92-95.

[11]     Meier, H., Buff, B., Laurischkat, R., and Smukala, V., “Increasing the part accuracy in dieless robot-based incremental sheet metal forming”, CIRP Annals - Manufacturing Technology, Vol. 58, 2009, pp. 233-238.

[12]     Allwood, J. M., Braun, D., and Music, O., “The effect of partially cut-out blanks on geometric accuracy in incremental sheet Forming”, Journal of Materials Processing Technology, Vol. 210, 2010, pp. 1501-1510.

[13]     Siegert, K., Ulmer, J., “Superimposing ultrasonic waves on the dies in tube and wire drawing”, Journal of Engineering Materials and Technology, Vol. 123, 2001, pp. 517-523.

[14]     Hung, J.-C., Hung, C., “The influence of ultrasonic-vibration on hot upsetting of aluminum alloy”, Ultrasonics, No. 43, 2005, pp. 692-698.

[15]     Tolga Bozdana, A., Gindy, N. N. Z., and Li, H., “Deep cold rolling with ultrasonic vibrations – a new mechanical surface enhancement technique”, International Journal of Machine Tools and Manufacture, No. 45, 2005, pp. 713-718.

[16]     Vahdati, M., Mahdavinejad, R.A., Amini, S., Abdullah, A., and Abrinia, K., “Design and manufacture of vibratory forming tool to develop “ultrasonic vibration assisted incremental sheet metal forming” process”, Modares Mechanical Engineering, Vol. 14, No. 11, 2014, pp. 68-76 (In Persian).

[17]     Vahdati, M., Mahdavinejad, R.A., and Amini, S., “Investigation of the Ultrasonic Vibration Effect in Incremental Sheet Metal Forming (ISMF) Process”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (to be published).

[18]     Vahdati, M., Sedighi, M., and Khoshkish, H., “An analytical model to reduce spring back in Incremental Sheet Metal Forming (ISMF) process”, International Journal of Advanced Materials Research (AMR), Vols. 83-86, 2010, pp. 1113-1120.

[19]     Montgomery, D. C., “Design and Analysis of Experiments”, 3^rd ed., New York, John Wiley & Sons, 1991.

[20]     Khuri, A. I., Cornell, J.A., “Response Surfaces Design and Analysis”, 2^nd ed., New York, MarcelDekker, 1996.

[21]     Myers, R. H., Montgomery, D. C., “Response Surface Methodology: Process and Product Optimization Using Designed Experiments”, 2^nd ed., New York, John Wiley & Sons, 2002.

[22]     Minitab Software Package, Ver. 16, http://www.minitab.com.

[23]     DIN 51524, Part 2.

[24]     CIMCO Software Package, Ver. 5, http://www.cimco.com.

[25]     Myers, R. H., Montgomery, D. C., and Anderson-Cook, C. M., “Response Surface Methodology: Process and Product Optimization Using Designed Experiments”, 3^rd ed., New York, John Wiley & Sons, 2009.