Kinematic Synthesis of a Novel Parallel Cable Robot as Artificial Leg
Subject Areas : Mechanical EngineeringEbrahim Shahabi 1 , MirAmin Hosseini 2
1 - Department of Mechanical Engineering,
Sari Branch, Islamic Azad University, Sari, Iran
2 - Department of Mechanical Engineering,
University of Mazandaran, Iran
Keywords:
Abstract :
[1] Kim, Y. C., Park, C. I., Kim, D. Y., Kim, T. S., Shin, J. C., "Statistical analysis of amputations and trends in Korea," Prosthetics and Orthotics International, Vol. 20, No. 2, 1996, pp. 88-95.
[2] Graham, K. Z., Mackenzie, E. J., Ephraim, P. L., Travison, T. G., Brookmeyer, R., "Estimating the prevalence of limb loss in the United States: 2005 to 2050," Archives of Physical Medicine and Rehabilitation, Vol. 89, No. 3, 2008, pp. 422-429.
[3] Heck, J. R., "General principles of amputations," Campbell’s Operative Orthopedics, Vol. 1, No. 11, 2008, pp. 561-578.
[4] Adams, P. F., Hendershot, G. E., Marano, M. A., "Current estimates from the national health interview survey 1996," National Center for Health Statistics, No. 200, 1999.
[5] Dillingham, T. R., Pezzin, L. E., Mackenzie, E. J., "Racial differences in the incidence of limb loss secondary to peripheral vascular disease: a population-based study," Archives of Physical Medicine and Rehabilitation, Vol. 83, No. 9, 2002, pp. 1252-1257.
[6] Saied, A. R., Heidari, E., Shamsaldini, M., "Causes of amputations performed during a 9-Year period in hospitals affiliated to kerman," Journal of Kerman University of Medical Sciences, Vol. 19, No. 3, 2012, pp. 260-267. (In Persian)
[7] Dario, F., Ning, J., Hubertus, R., Leš, H. A., Bernhard, G., Hans, D., Aszmann, C. O., "The extraction of neural information from the surface EMG for the control of upper-limb prostheses: Emerging avenues and challenges," IEEE Transactions on Neural Systems and Rehabilitation Engineering, Vol. 22, No. 4, 2014, pp.797-809.
[8] Ernesto, C., Martinez, V., Jeff, W., Elliott, G., Herr, H., "Design of an agonist-antagonist active knee prosthesis," Proceeding of the 2nd Biennial IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics Scottsdale, AZ, USA, 2008.
[9] Ficanha, E. M., Rastgar, M., Mordian, B., Mahmoudian, N., "Ankle angles during step turn and straight walk: implications for the design of a steerable ankle-foot prosthetic robot," Proceedings of the ASME 2013 Dynamic Systems and Control Conference, October, 2013.
[10] Saber, O., "A spatial translational cable robot," Journal of Mechanisms and Robotics, Vol. 7, No. 3, 2015.
[11] Aghili, F., Buehler, M., Hollerbach, J. M., "Dynamics and control of direct-drive robots with positive joint torque feedback," Proceeding of International Conference on Robotics and Automation, Albuquerque, New Mexico, 1997, pp. 1156-1161.
[12] Cone, L. L., "Skycam-an aerial robotic camera system," Byte, Vol. 10, No. 10, 1985, pp. 122-132.
[13] Taghirad, H. D., Nahon, M., "Kinematic analysis of a macro–micro redundantly actuated parallel manipulator," Advanced Robotics, Vol. 22, No. 6, 2008, pp. 657-687.
[14] Campbell, P. D., Swaim, P. L., Thompson, C. J., "Charlotte robot technology for space and terrestrial applications," In SAE International Conference on Environmental Systems 25th, San Diego, CA, 1995.
[15] Merlet, J. P., Daney, R., "Modular parallel wire crane for rescue operations," IEEE International Conference Robotics and Automation (ICRA), 2010, pp. 2834-2839.
[16] Tadokoro, S., Murao, Y., Hiller, M., Murata, R., Kohkawa, H., Matsushima, T., "A motion base with 6-dof by parallel cable drive architecture," Mechatronics on IEEE/ASME Transactions, Vol. 7, No. 2, 2002, pp. 115-123.
[17] Kawamura, S., Kino, H., Won, C., "High-speed manipulation by using parallel wire-driven robots," Robotica, Vol. 18, No. 1, 2000, pp. 13–21.
[18] Taherifar, A., Salarieh, H., Alasty, A., "Minimum time and minimum switch path planning for a hyper-redundant manipulator with lockable joints," Modares Mechanical Engineering, Vol. 12, No. 1, 2012, pp. 50-65. (In Persian)
[19] Brackbill, E., Mao, Y., Agrawal, S. K., "Dynamics and control of a 4-dof wearable cable-driven upper arm exoskeleton," IEEE International Conference on Robotics and Automation, Kobe International Conference Center Kobe, Japan, 2009, pp. 2300-2305.
[20] Bamdad, M., Zarshenas, H., "Robotic rehabilitation with the elbow stiffness adjustability," Modares Mechanical Engineering, Vol. 14, No. 11, 2014, pp. 151-158.(In Persian)
[21] Bamdad, M., Cable-driven parallel robots: Time-energy optimal trajectory planning of cable-suspended manipulators, Springer Berlin Heidelberg, 2012, pp. 41-51.
[22] Jacobsen, S. C., Iversen, E. K., Johnson, R. T., Knutti, D. F., Biggers, K. B., "The design of the Utah/MIT hand," IEEE International Conference on Robotics and Automation, Vol. 3, 1986, pp. 1520-1532.
[23] Massie, T., Salisbury, J. K., "The PHANTOM haptic interface: A Device for Probing Virtual Objects," Symposium on haptic interfaces for virtual environment and teleoperator systems, Chicago, IL, Vol. 55, No. 1, 1994, pp. 295-300.
[24] Saber, O., Abyaneh, S., Zohoor, H., "A cable-suspended robot with a novel cable based end effector," In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, 2010, pp. 799-808.
[25] Köker, R., Cemil , Ö., Tarık, Ç., Hüseyin, E., "A study of neural network based inverse kinematics solution for a three-joint robot," Robotics and Autonomous Systems, Vol. 49, No. 3, 2004, pp. 227-234.
[26] Oyama, E., Arvin, A., Karl, F. M., Taro, M., Susumu, T., "A modular neural network architecture for inverse kinematics model learning," Neurocomputing, Vol. 38, 2001, pp. 797-805.
[27] Bingul, Z., Ertunc, H. M., Oysu, C., Comparison of inverse kinematics solutions using neural network for 6R robot manipulator with offset, In Computational Intelligence Methods and Applications, 2005.
[28] Chiddarwar, S. S., Ramesh, B. N., "Comparison of RBF and MLP neural networks to solve inverse kinematic problem for 6R serial robot by a fusion approach," Engineering applications of artificial intelligence, Vol. 23, No. 7, 2010, pp. 1083-1092.
[29] Hosseini, M. A., Daniali, H. R. M., "Kinematic analysis of tricept parallel manipulator," IIUM Engineering Journal, Vol. 12, No. 5, 2012.
[30] Gosselin, C. M., "Static balancing of spherical 3-DOF parallel mechanisms and manipulators," The International Journal of Robotics Research, Vol. 18, No. 8, 1999, pp. 819-829.
[31] Ebert-Uphoff, I., Gosselin, C. M., Laliberte, T., "Static balancing of spatial parallel platform mechanisms-revisited," Journal of Mechanical Design, Vol. 122, No. 1, 2000, pp. 43-51.
[32] Gallina, P., Rossi, A., Williams, I. I., Robert, L., "Planar cable-direct-driven robots," Proceeding of the ASME IDETC/CIE Mechanics and Robotics Conference, 2001, pp. 1241-1247.
[33] Lee, M. K., Park, K. W., "Kinematic and dynamic analysis of a double parallel manipulator for enlarging workspace and avoiding singularities," IEEE Transactions on Robotics and Automation, Vol. 15, No. 6, 1999, pp. 1024-1034.
[34] Verhoeven, R., "Analysis of the workspace of tendon-based Stewart Platforms," PhD Thesis, Duisburg-Essen University, 2004.
[35] Gouttefarde, M., Merlet, J. P., Daney, D., Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms, Springer, 2006, pp. 315-22.
[36] Lim, W. B., Yang, G., Yeo, S. H., Mustafa, S. K., "A generic force-closure analysis algorithm for cable-driven parallel manipulators," Mechanism and Machine Theory, Vol. 46, No. 9, 2011, pp. 1265-1275.
[37] Kawamura, S., Ito, K., "A new type of master robot for teleoperation using a radial wire drive system," IEEE/RSJ International Conference on Intelligent Robots and System, Intelligent Robots for Flexibility, Vol. 1, No. 1, 1993, pp. 55-60.
[38] Basic human anatomy, from https://www.dartmouth.edu/~humananatomy/figures/chapter_17/17-6.HTM
[39] Foot fitness, from http://fitsouffle.com/home?page=51, accessed on 2013-05-23.
[40] Active range of motion exercises, from http://www.drugs.com/cg/active-range-of-motion-exercises.html.
