Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach
Subject Areas : aerospaceFoozie Morovat 1 , Jafar Roshanian 2 , Ali Mozaffari 3 , Hadi Zaare 4
1 - Department of Aerospace Engineering,
K. N. Toosi University of Technology, Tehran, Iran
2 - Department of Aerospace Engineering,
K. N. Toosi University of Technology, Tehran, Iran
3 - Department of Mechanical and Aerospace Engineering,
K. N. Toosi University of Technology, Tehran, Iran
4 - Department of Aerospace Engineering,
Sharif University of Technology, Tehran, Iran
Keywords:
Abstract :
[1] Walden, D., Roedler, G., Forsberg, K., Hamelin, R. and Shortell, T., INCOSE Systems Engineering Handbook: A Guide for System Life Cycle Processes and Activities, John Wiley & Sons, 2015.
[2] Liu, D., Systems Engineering: Design Principles and Models, CRC Press, 2015.
[3] Sadraey, M. H., Aircraft Design: A Systems Engineering Approach, John Wiley & Sons, 2012.
[4] Huang, Y., Seck, M. and Fumarola, M., A Simulation Based Design Framework for Large Scale Infrastructure Systems Design, MAS: Proceedings of The 11th International Conference on Modelling & Applied Simulation, Vienna, Austria, 2012, pp. 19-21.
[5] AIAA, White Paper on Current State of the Art. AIAA Technical Committee on Multidisiplinary Design Optimization (MDO), 1991.
[6] Martins, J. R., A. B. Lambe, Multidisciplinary Design Optimization: A Survey of Architectures, AIAA Journal, Vol. 51, No. 9, 2013, pp. 2049-2075.
[7] Duranté, N., Dufour, A., Pain, V., Baudrillard, G. and Schoenauer, M., Multidisciplinary Analysis and Optimisation Approach for the Design of Expendable Launchers, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference Albany, New-York, USA, 2004.
[8] Lee, J. W., Jeon, K. S., Byun, Y. H. and Kim, S. J., Optimal Space Launcher Design Using a Refined Response Surface Method Fuzzy Systems and Knowledge Discovery, 2005, pp. 1081-91.
[9] Braun, R., Kroo, I. and Moore, A., Use of the Collaborative Optimization Architecture for Launch Vehicle Design, Proceedings of the 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 1996.
[10] Briggs, G., Ray, T. and Milthorpe, J., Optimal Design of an Australian Medium Launch Vehicle, Innovations in Systems and Software Engineering, Vol. 3, No. 2, 2007, pp. 105-116.
[11] Bayley, D. J., Design Optimization of a Space Launch Vehicle Using a Genetic Algorithm, Auburn, Auburn University, 2008.
[12] Rafique, A. F., Linshu, H., Zeeshan, Q. and Kamran, A., Multidisciplinary Design of Air-Launched Space Launch Vehicle using Simulated Annealing, Advances in Artificial Intelligence, 2009, Vol. 5803, pp. 719-26.
[13] Jodei, J., Ebrahimi, M. and Roshanian, J., Multidisciplinary Design Optimization of a Small Solid Propellant Launch Vehicle using System Sensitivity Analysis, Structural and Multidisciplinary Optimization, Vol. 38, No. 1, 2009, pp. 93-100.
[14] Hosseini, M., Toloie, A., Nosratollahi, M. and Adami, A., Multidisciplinary Design Optimization of an Expendable Launch Vehicle, Recent Advances in Space Technologies (RAST), 2011.
[15] Ebrahimi, M., Farmani, M. R. and Roshanian, J., Multidisciplinary Design of a Small Satellite Launch Vehicle using Particle Swarm Optimization, Structural and Multidisciplinary Optimization, Vol. 44, No. 6, 2011, pp. 773-84.
[16] Aldheeb, M. A., Kafafy, R., Idres, M., Omar, H. M. and Abido, M. A., Design Optimization of Micro Air Launch Vehicle using Differential Evolution, Journal of Aerospace Technology and Management, Vol. 4, No. 2, 2012, pp. 185-96.
[17] Balesdent, M., Bérend, N. and Dépincé, P., Stagewise Multidisciplinary Design Optimization Formulation for Optimal Design of Expendable Launch Vehicles, Journal of Spacecraft and Rockets, Vol. 49, No. 4, 2012, pp. 720-30.
[18] Balesdent, M., Bérend, N., Dépincé, P. and Chriette, A., A Survey of Multidisciplinary Design Optimization Methods in Launch Vehicle Design, Structural and Multidisciplinary Optimization, Vol. 45, No. 5, 2012, pp. 619-42.
[19] Castellini, F., Lavagna, M., Riccardi, A. and Büskens, C., Multidisciplinary Design Optimization Models and Algorithms for Space Launch Vehicles, 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference Fort-Worth, TX USA. 2010.
[20] Darabi, H., Roshanian, J. and Zare, H., Design of Liquid-Propellant Engine using Collaborative Optimization and Evolutionary Algorithms, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 229, No. 2, 2014, 0954410014529423.
[21] Salimi, H., Saranjam, B., Fard, A. H. and Ahmadzadeh, M., Use of Genetic Algorithms for Optimal Design of Sandwich Panels Subjected to Underwater Shock Loading, Strojniški vestnik-Journal of Mechanical Engineering, Vol. 58, No. 3, 2012, pp. 156-164.
[22] Yuan, C., Bergsma, O., Koussios, S., Zu, L. and Beukers, A., Optimization of Sandwich Composites Fuselages under Flight Loads, Applied Composite Materials, Vol. 19, No. 1, 2012, pp. 47-64.
[23] Yuan, C. O., Roozen, N. B., Bergsma, O. and Beukers, A., Multi-Discipline Optimization of Sandwich Cylinders Under a Point Force Excitation, Aerospace Science and Technology, Vol. 30, No. 1, 2013, pp. 183-191.
[24] Ullah, R., Zhou, D. Q., Zhou, P., Hussain, M. and Sohail, M. A., An Approach for Space Launch Vehicle Conceptual Design and Multi-Attribute Evaluation, Aerospace Science and Technology, Vol. 25, No. 1, 2013, pp. 65-74.
[25] Ma, Y., Yao, X. and Su, Y., Shape Optimization and Material Gradient Design of the Sharp Hot Structure, Acta Astronautica, Vol. 103, 2014, pp. 106-112.
[26] Ebrahimi, S., Vahdatazad, N., Multiobjective Optimization and Sensitivity Analysis of Honeycomb Sandwich Cylindrical Columns Under Axial Crushing Loads, Thin-Walled Structures, Vol. 88, 2015, pp. 90-104.
[27] Baroutaji, A., Gilchrist, M., Smyth, D. and Olabi, A. G., Analysis and Optimization of Sandwich Tubes Energy Absorbers Under Lateral Loading, International Journal of Impact Engineering, Vol. 82, 2015, pp. 74-88.
[28] Ashley, H., On Making Things the Best-Aeronautical Uses of Optimization, Journal of Aircraft, Vol. 19, No. 1, 1982, pp. 5-28.
[29] AIAA. White Paper on Current State of the Art, AIAA Technical Committee on Multidisiplinary Design Optimization (MDO), 1991.
[30] Chen, X., Yan, L., Luo, W., Xu, L., Zhao, Y. and Wang, Z., Research on Theory and Application of Multidisciplinary Design Optimization of Flight Vehicles, Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2006.
[31] Martins, J. R., Lambe, A. B., Multidisciplinary Design Optimization: A Survey of Architectures, The American Institute of Aeronautics and Astronautics Journal, Vol. 51, No. 9, 2013, pp. 2049-2075.
[32] William, B., Missile Datcom, Status and Future Plans, 15th Applied Aerodynamics Conference, American Institute of Aeronautics and Astronautics, 1997.
[33] Mozaffari, A., Morovat, F. and Zare, H., Analytical Solution for Buckling of Composite Sandwich Truncated Conical Shells under Combined External Pressure and Axial Compression Load, International Journal of Advanced Design and Manufacturing Technology (ADMT), Vol. 8, No. 4, 2015.
