Study of chemical absorption of chromium by rice stem using physico-chemical adsorption isotherm model

Subject Areas : environmental management

Fatemeh Soltani ¹ , Shayan Shamohammadi ²

1 - MSc Graduted Department of Water Engineering, University of Shahrekord, Shahrekord, Iran. * (Corresponding Author)
2 - Professor Department of Water Engineering, Shahrekord University, Shahrekord, Iran

Received: 2014-05-20 Accepted : 2014-09-17 Published : 2017-03-21

Keywords: Adsorption, Rice stem, chromium, Equilibrium models,

Abstract :

Background and Objective: One of the main objectives of the adsorption isotherm models is to determine the maximum capacity of the adsorbent. The main purpose of this study is to investigate the chemical absorption rate of chromium from aqueous solution by rice stem, using physico-chemical adsorption isotherm model of Shamohammadi and to compare adsorption isotherm models for determining the maximum capacity of the adsorbent. Method: The rice stem with particle sizes of 75, 300, 850 and 1200 micron, and the chromium solution with concentrations of 15 to 40 (mg/L) were used in this study. Findings: The maximum adsorption efficiency of 96.30 % was obtained in in pH=2 using 10 (g/l) of rice stem with particle size of 75 micron. The maximum adsorption capacities of chromium by Langmuir model and Shamohammadi model for the rice stem were obtained as 2.918 and 4.926 (mg/g) in particle size of 75 microns, 2.206 and 3.310 (mg/g) in particle size of 300 microns, 1.838 and 2.617 (mg/g) in particle size of 850 microns and 1.037 and 1.322 (mg/g) in particle size of 1200 microns respectively. Conclusion: Isotherm absorption studies showed that, based on Shamohammadi model, averagely 20.5% of adsorption occurs as initial adsorption. Moreover, by considering equilibrium adsorption (qe) as a function of initial concentration (C0), not only the precision of the model will be enhanced (according to evaluation criteria), but also the equilibrium capacity of adsorption increases to an average of 26.5% compared to the Langmuir model. Thus, application of the Shamohammadi model increases the capacity of chromium absorption by rice stem by an average of 47% compared to the Langmuir model.

References:

 

1-   ناصح، نگین و همکاران. « بررسی کارآیی حذف کروم شش ظرفیتی از محلولهای آبی، با استفاده از جاذب طبیعی پوسته سبز بادام و خاکستر حاصل از آن ». مجله علمی دانشگاه علوم پزشکی بیرجند. پائیز 1392، شماره 3، صفحات 220 تا 232.

2-      Gupta, V.K., Shrivastava, A.K., Jain, N. 2001. Biosorption of chromium (VI) from aqueous solutions by green algae spirogyra species. Water Research, Vol. 35, pp. 4079–4090.

3-      MadhavaRao, M., Ramesh, A., Purna Chandra Rao, G., and Seshaiah, K. 2006. Removal of copper and cadmium from the aqueous solutions by activated carbon derived from Ceiba pentandra hulls. Hazardous Materials, B129, pp. 123- 129.

4-      Aydin, H., Bulut, Y., and Yerlikaya, C. 2008. Removal of copper (II) from aqueous solution by adsorption onto low- cost adsorbents. Environment Management, Vol. 87, pp. 37- 45.

5-      Qu, J.H. 2008. Research progress of novel adsorption processes in water purification: A review. Environment Sciences, Vol. 20, pp. 1–13.

6-      Mahajan G, Sud D. 2011. Kinetics and equilibrium studies of Cr (VI) metal ion remediation by arachis hypogea shells: agreen approach. BioResources. Vol. 6, pp. 3324-3338.

7-      Shawky, B.T, Mahmoud, M.G., Ghazy, E.A., Asker, M.M.S., Ibrahim, G.S. 2011. Enzymatic hydrolysis of rice straw and corn stalks for monosugars production. Journal of Genetic Engineering and Biotechnology, Vol. 9, pp. 59–63.

8-      Binod, P., Sindhu, R., Singhania, R.R., Vikram, S., Devi, L., Nagalakshmi, S., Kurien, N., Sukumaran, R.K., Pandey, A. 2010. Bioethanol production from rice straw: An overview. Bioresource Technology, Vol. 101, pp. 4767–4774.

9-      Malek, A., Farooq, S. 1996. Comparison of isotherm models for hydrocarbon adsorption on activated carbon. AIChE, Vol. 42, pp. 3191–3201.

10-  Febrianto, J., Kosasih, A.N., Sunarso, J., Yi-Hsu, J., Indraswati, N., and Ismadji, S. 2009. Equilibrium and kinetic studies in adsorption of heavy metals using biosorbent: a summary of recent studies. Journal of Hazardous Materials, Vol. 162, pp. 616-645.

11-  Bruanuer, S., Emmett, P.H., and Teller, E. 1938. Adsorption of gases in multimolecular layers.  Journal of American Chemical Society, Vol. 60, pp. 309–316.

12-  Lopez-Garcia, M., Lodeiro, P., Barriada, J.L., Herrero, R., and Sastrede Vicente, M.E. 2010. Reduction of Cr (VI) levels in solution using bracken fern biomass: Batch and column studies. Chemical Engineering, Vol. 165, pp. 517-523.

13-  Bayat, B. 2002. Comparative study of adsorption properties of Turkish fly ashes II. The case of chromium (VI) and cadminum (II). Hazardous Material, Vol. 95, pp. 275–290.

14-  Shamohammadi, S. 2014. Presentation of new physical chemistry isotherm model for adsorption processes from the solution. International Journal of plant, animal and environmental sciences, Vol. 4, pp. xx.

15-  Shamohammadi, S. 2012. Study of Kinetics of Copper in Aqueous Solution by Sawdust Adsorbent. Journal of Water and Wastewater, Vol. 24, pp. 127-133.

16-  Shamohamadi, S., Bustanian, M., and Tavakol, H. 2013. Removing Cd (II) from water and wastewater by blowy sand; the effects of total hardness and pH. Journal of desalination and water treatment, Vol. 51, pp. 16-18.

17-  AL-Othman, Z.A., Ali, R., and Naushad, M.u. 2012. Hexavalent chromium removal from aqueous medium by activated carbon prepared from peanut shell: Adsorption kinetics, equilibrium andthermodynamic studies. Chemical Engineering, Vol. 184, pp. 238– 247.

18-  Chang, Y.Y., Lim, J.W., and Yang, J.K. 2012. Removal of As (V) and Cr (VI) in aqueous solution by sand media simultaneously coated with Fe and Mn oxides. Industrial and Engineering Chemistry, Vol. 18, pp. 188–192.