Identify and determine the key factors in the amount environmental impact of the green product using interpretative structural modeling approach(Case study: Industry of Sanitary Accessories of Qazvin)
Subject Areas :
Environmental pollutions (water, soil and air)
Safar
Fazli
1
(Associate Professor of Industrial Management, International University of Imam Khomeini Qazvin, Iran.)
Roya
Parhizkari
2
(Ms Student of Industrial Management, International University of Imam Khomeini Qazvin, Iran *(Corresponding Author))
Received: 2015-09-30
Accepted : 2016-04-20
Published : 2017-12-22
Keywords:
Green Product,
Environmental effects,
Interpretive Structural Model,
Sanitary Accessories,
Abstract :
Abstract Background and Objective: Nowadays production industries managers need to identify the key factors of green product life cycle stages until they can better assess the environmental impact of its products and produce the green product with less time and expense. Therefore, the first objective of this study is the first to assess the effects of environmental factors on health products be identified in Qazvin province. Then, use the interpretive structural modeling (ISM) which were ranked. Method: The ISM method is a qualitative method that aims to identify and prioritize environmental impact of the product. Findings: The results of ranking and to investigate effective factors on the environmental effects resulting from production of green products showed that rinse is an autonomic criterion that has negligible penetrating power. Four criteria related to the construction and productions of the product are in the affiliated groups that have weak penetrating power, but the strong dependence to system. Also, the results showed that in assessment of green product environmental impact any criterion is not in connective criteria groups. In addition, the results showed that the criterion of chemicals, soap, recycling toxic substances, disposal of nontoxic substances and packaging are considered as the key criteria. Discussion and Conclusions: according to the results it is recommended that production industries managers health productsof Qazvin consider above five key criteria to reduce the environmental effects of products and with further carefully and study in selection of raw materials and recycling and disposal of waste material and also type and shape of packaging prevents from entering compatible health products with environment to the market.
References:
Reference
González-Benito, J., González-Benito, O., (2006). "A review of determinant factors of environmental proactivity". Business Strategy and the Environment, 15(2): 87-102.
Murillo-Luna, J.L., Garcés-Ayerbe, C., Rivera-Torres, P., (2008)." Why do patterns of environmental response differ? A stakeholders’ pressure approach". Strategic Management Journal, 29(11): 1225-1240.
Dangelico, Rosa Maria., Pontrandolfo, Pierpaolo., (2010)."From green product definitions and classifications to the Green Option Matrix". Journal of Cleaner Production, 18(1): 1608-1628.
Jabbour, Charbel Jose Chiappetta., Jugend, Danie., Jabbour, Ana Beatriz Lopes de Sousa., Gunasekaran, Angappa., Latan, Hengky., (2015)."Green product development and performance of Brazilian firms: measuring the role of human and technical aspects ". Journal of Cleaner Production, 87(1): 442- 451.
Chan, Hing Kai., Wang, Xiaojun., Chung, Sai Ho., (2013)." A Fuzzy-AHP Framework for Evaluation of Eco-Design Alternatives". International Journal of Innovation, Management and Technology, 4(1): 78-91.
Sazegar nejad, Fatemeh., Amiran, Hyder.,(2011)." Xyz Co. Strategic Plan". Management Research Report, Islamic Azad University, Tehran, Faculty of Management, p. 3. [persion]
Ministry of Commerce., (2013). "Annual Report of Qazvin Commercial Organization". Qazvin Commercial Organization, Deputy of Inspection and Supervision, page 23. (In Persion)
Ramezanian, Mohammadrahim, Esmaeilpour, Reza, Tondkar, Seyedeh Hediyeh, (2010)," The Effect of Green Marketing Blend on Consumer Decision-Making Process (Case Study: Household Consumers in Small City Lamps, Rasht, Iran)". 2 (5): 98-79. (In Persion)
Wang, Xiaojun., Chan, Hing Kai.,Li, Dong., (2015)." A case study of an integrated fuzzy methodology for green product Development". European Journal of Operational Research, 241: 212–223.
Khezri, Mostafa, Monavari, Masoud, Anari Tafti, Hamid,(2008)." Review of waste minimization systems in the detergent industry". Journal of Environmental Science and Technology, 10 (2): 21-15. (In Persion)
Agarwal, Ashish., Shankar, R., Tiwari, M.K., (2007). "Modeling agility of supply chain". Industrial Marketing Management, 36: 443-457.
Papadopoulos,I., Karagouni, G., Trigkas, M., Platogianni, E., (2010). "Green marketing: The case of Greece in certified and sustainably managed timber products". Euro Med Journal of Business, 5 (2): 166-190.
Award, T., (2011)."Environmental segmentation alternatives: buyers’ profiles and implications", Journal of Islamic Marketing, 2(1): 55-73.
Nakhaee, Arzoo, Kheiri, Bahram, (2012)." Investigating the Effect of Selected Factors on Intent to Purchase Green Products". Journal of Marketing Management, 15: 130- 106
Chen, Y. S., Lai, S.B.,Wen, C.T., (2006)." The influence of green innovation performance on corporate advantage in Taiwan". Journal of Business Ethics, 67(4): 331-339.
Chung,Y., Tsai,C., (2007)."The effect of green design activities on new product strategies and performance: an empirical study among high-tech companies". International Journal of Management, 24(2): 276-288.
Peattie, K., (1995)."Environmental Marketing Management: Meeting the Green Challenge". Pitman Publishing, London, UK.
Reinhardt, F. L., (1998). "Environmental product differentiation: implications for corporate strategy". California Management Review, 40(4): 43-73.
Kaebernick, H., Soriano, V., (2000)."An approach to simplified environmental assessment by classification of products". In: Proceedings of Seventh CIRP International Conference on Life Cycle Engineering, Tokyo, Japan, 27- 29.
Saouter, E., Van Hoof, A., (2001)." A database for life-cycle assessment of Procter & Gamble laundry detergents". Int J Life Cycle Assess, 7(2):103-114.
Koehler, A., Wildboz, C., (2009)." Comparing the environmental footprints of home-care and personal-hygiene products: the relevance of different life-cycle phases". Environ Sci Tech, 43(1): 8643-8651.
Koning, Arjan de., Schowanek, Diederik., Dewaele, Joost., Weisbrod, Annie., Guinée, Jeroen., (2010) ." Uncertainties in a carbon footprint model for detergents; quantifying the confidence in a comparative result". Int J Life Cycle Assess, 15:79–89
Kapur, Amit ., Baldwin, Cheryl ., Swanson, Mary ., Wilberforce, Nana ., McClenachan, Giovanna ., Rentschler, Mark.,(2012)."Comparative life cycle assessment of conventional and Green Seal- compliant industrial and institutional cleaning products ".Int J Life Cycle Assess, 17(1): 377-387.
Azar, Adel, Tizro, Ali, W., Abbas Moghbel, Anvari Rostami, Aliasghar, 2010, Designing Supply Chain Agility Model; Interpretative-Structural Modeling Approach; Moderator of Humanities-Management Researches in Iran, 14 (4): 25-1. (In Persion)
Mandal, Anukul., Deshmukh, S.G., (1994)."Vendor Selection Using Interpretive Structural Modelling (ISM)". International Journal of Operations& Production Management, 14(6): 52-59.
Pfohl, HCh., Gallus,Ph., Thomas,D., (2011)." Interpretive Structural Modeling of Supply Chain Risks". International Journal of Physical Distribution & Logistics Management; 41(9): 839-859.
Olfat, Layla, Shahriyari niya, Arash, (2015)." Interpretative Structural Modeling Factors Affecting Fellow Selection in Agile Supply Chain". Production Management and Operations. 5 (2): 128-109. (In Persion)
_||_
Reference
González-Benito, J., González-Benito, O., (2006). "A review of determinant factors of environmental proactivity". Business Strategy and the Environment, 15(2): 87-102.
Murillo-Luna, J.L., Garcés-Ayerbe, C., Rivera-Torres, P., (2008)." Why do patterns of environmental response differ? A stakeholders’ pressure approach". Strategic Management Journal, 29(11): 1225-1240.
Dangelico, Rosa Maria., Pontrandolfo, Pierpaolo., (2010)."From green product definitions and classifications to the Green Option Matrix". Journal of Cleaner Production, 18(1): 1608-1628.
Jabbour, Charbel Jose Chiappetta., Jugend, Danie., Jabbour, Ana Beatriz Lopes de Sousa., Gunasekaran, Angappa., Latan, Hengky., (2015)."Green product development and performance of Brazilian firms: measuring the role of human and technical aspects ". Journal of Cleaner Production, 87(1): 442- 451.
Chan, Hing Kai., Wang, Xiaojun., Chung, Sai Ho., (2013)." A Fuzzy-AHP Framework for Evaluation of Eco-Design Alternatives". International Journal of Innovation, Management and Technology, 4(1): 78-91.
Sazegar nejad, Fatemeh., Amiran, Hyder.,(2011)." Xyz Co. Strategic Plan". Management Research Report, Islamic Azad University, Tehran, Faculty of Management, p. 3. [persion]
Ministry of Commerce., (2013). "Annual Report of Qazvin Commercial Organization". Qazvin Commercial Organization, Deputy of Inspection and Supervision, page 23. (In Persion)
Ramezanian, Mohammadrahim, Esmaeilpour, Reza, Tondkar, Seyedeh Hediyeh, (2010)," The Effect of Green Marketing Blend on Consumer Decision-Making Process (Case Study: Household Consumers in Small City Lamps, Rasht, Iran)". 2 (5): 98-79. (In Persion)
Wang, Xiaojun., Chan, Hing Kai.,Li, Dong., (2015)." A case study of an integrated fuzzy methodology for green product Development". European Journal of Operational Research, 241: 212–223.
Khezri, Mostafa, Monavari, Masoud, Anari Tafti, Hamid,(2008)." Review of waste minimization systems in the detergent industry". Journal of Environmental Science and Technology, 10 (2): 21-15. (In Persion)
Agarwal, Ashish., Shankar, R., Tiwari, M.K., (2007). "Modeling agility of supply chain". Industrial Marketing Management, 36: 443-457.
Papadopoulos,I., Karagouni, G., Trigkas, M., Platogianni, E., (2010). "Green marketing: The case of Greece in certified and sustainably managed timber products". Euro Med Journal of Business, 5 (2): 166-190.
Award, T., (2011)."Environmental segmentation alternatives: buyers’ profiles and implications", Journal of Islamic Marketing, 2(1): 55-73.
Nakhaee, Arzoo, Kheiri, Bahram, (2012)." Investigating the Effect of Selected Factors on Intent to Purchase Green Products". Journal of Marketing Management, 15: 130- 106
Chen, Y. S., Lai, S.B.,Wen, C.T., (2006)." The influence of green innovation performance on corporate advantage in Taiwan". Journal of Business Ethics, 67(4): 331-339.
Chung,Y., Tsai,C., (2007)."The effect of green design activities on new product strategies and performance: an empirical study among high-tech companies". International Journal of Management, 24(2): 276-288.
Peattie, K., (1995)."Environmental Marketing Management: Meeting the Green Challenge". Pitman Publishing, London, UK.
Reinhardt, F. L., (1998). "Environmental product differentiation: implications for corporate strategy". California Management Review, 40(4): 43-73.
Kaebernick, H., Soriano, V., (2000)."An approach to simplified environmental assessment by classification of products". In: Proceedings of Seventh CIRP International Conference on Life Cycle Engineering, Tokyo, Japan, 27- 29.
Saouter, E., Van Hoof, A., (2001)." A database for life-cycle assessment of Procter & Gamble laundry detergents". Int J Life Cycle Assess, 7(2):103-114.
Koehler, A., Wildboz, C., (2009)." Comparing the environmental footprints of home-care and personal-hygiene products: the relevance of different life-cycle phases". Environ Sci Tech, 43(1): 8643-8651.
Koning, Arjan de., Schowanek, Diederik., Dewaele, Joost., Weisbrod, Annie., Guinée, Jeroen., (2010) ." Uncertainties in a carbon footprint model for detergents; quantifying the confidence in a comparative result". Int J Life Cycle Assess, 15:79–89
Kapur, Amit ., Baldwin, Cheryl ., Swanson, Mary ., Wilberforce, Nana ., McClenachan, Giovanna ., Rentschler, Mark.,(2012)."Comparative life cycle assessment of conventional and Green Seal- compliant industrial and institutional cleaning products ".Int J Life Cycle Assess, 17(1): 377-387.
Azar, Adel, Tizro, Ali, W., Abbas Moghbel, Anvari Rostami, Aliasghar, 2010, Designing Supply Chain Agility Model; Interpretative-Structural Modeling Approach; Moderator of Humanities-Management Researches in Iran, 14 (4): 25-1. (In Persion)
Mandal, Anukul., Deshmukh, S.G., (1994)."Vendor Selection Using Interpretive Structural Modelling (ISM)". International Journal of Operations& Production Management, 14(6): 52-59.
Pfohl, HCh., Gallus,Ph., Thomas,D., (2011)." Interpretive Structural Modeling of Supply Chain Risks". International Journal of Physical Distribution & Logistics Management; 41(9): 839-859.
Olfat, Layla, Shahriyari niya, Arash, (2015)." Interpretative Structural Modeling Factors Affecting Fellow Selection in Agile Supply Chain". Production Management and Operations. 5 (2): 128-109. (In Persion)
