Design Software Failure Mode and Effect Analysis using Fuzzy TOPSIS Based on Fuzzy Entropy

Subject Areas : Software Architecture

shahrzad Oveisi ¹ , Mohammad Nadjafi ² , Mohammad Ali Farsi ³ , Ali moeini ⁴ , Mahmood Shabankhah ⁵

1 - Department of Algorithms and Computation, College of Engineering Sciences, University of Tehran, Tehran, Iran
2 - Aerospace Research Institute (Ministry of Science, Research and Technology), Tehran, P.O.B. 14665-834, Iran
3 - Aerospace Research Institute (Ministry of Science, Research and Technology), Tehran, P.O.B. 14665-834, Iran
4 - Department of Algorithms and Computation, College of Engineering Sciences, University of Tehran, Tehran, Iran
5 - Department of Algorithms and Computation, College of Engineering Sciences, University of Tehran, Tehran, Iran

Received: 2020-06-26 Accepted : 2020-08-14 Published : 2020-08-01

Keywords:

References:

[1].    Farsi, M. A., & Zio, E. (2019). Industry 4.0: Some challenges and opportunities for Reliability Engineering. International Journal of Reliability, Risk and Safety: Theory and Application, 2(1), 23-34.‏
[2].    Zio, E. (2016). Some challenges and opportunities in reliability engineering. IEEE Transactions on Reliability, 65(4), 1769-1782.‏
[3].    Oveisi, S., & Ravanmehr, R. (2017). Analysis of software safety and reliability methods in cyber physical systems. International journal of critical infrastructures, 13(1), 1-15.‏
[4].    Oveisi, S., Farsi, M. A., Nadjafi, M., & Moeini, A., 2019. A New Approach to Promote Safety in the Software Life Cycle. Journal of Computer & Robotics, 12(1), 77-91.‏
[5].    Narayanagounder, S., & Gurusami, K.,2009. A new approach for prioritization of failure modes in design FMEA using ANOVA. World Academy of Science, Engineering and Technology, 49(524-31).‏
[6].    Stamatis, D. H. (2003). Failure mode and effect analysis: FMEA from theory to execution. Quality Press.‏
[7].    Patil, S. K., & Kant, R. (2014). A fuzzy AHP-TOPSIS framework for ranking the solutions of Knowledge Management adoption in Supply Chain to overcome its barriers. Expert systems with applications, 41(2), 679-693.‏
[8].    Liu, H. C., Liu, L., Liu, N., & Mao, L. X. (2012). Risk evaluation in failure mode and effects analysis with extended VIKOR method under fuzzy environment. Expert Systems with Applications, 39(17), 12926-12934.‏ 
[9].    Bowles, J. B., & Peláez, C. E. (1995). Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis. Reliability Engineering & System Safety, 50(2), 203-213.‏
[10].    Kutlu, A. C., & Ekmekçioğlu, M. (2012). Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP. Expert Systems with Applications, 39(1), 61-67.‏ 
[11].    Liu, H. C., Liu, L., & Liu, N. (2013). Risk evaluation approaches in failure mode and effects analysis: A literature review. Expert systems with applications, 40(2), 828-838.‏.
[12].    Yazdani, M., Alidoosti, A., & Zavadskas, E. K. (2011). Risk analysis of critical infrastructures using fuzzy COPRAS. Economic research-Ekonomska istraživanja, 24(4), 27-40.‏
[13].    Zhang, F., & Zhang, W. (2015, August). Failure modes and effects analysis based on fuzzy TOPSIS. In 2015 IEEE International Conference on Grey Systems and Intelligent Services (GSIS) (pp. 588-593). IEEE.‏
[14].    CAO, W., NIU, C., & FAN, Y. (2013). A Grey Relational Projection Method for Multi-attribute Decision Making Based on Interval-valued Intuitionistic Trapezoidal Fuzzy Number. Journal of Taiyuan University of Technology, 2(026), 3467-3477.‏.
[15].    Oveisi, S., & Farsi, M. A. (2018). Software safety analysis with UML-Based SRBD and fuzzy VIKOR-Based FMEA. International Journal of Reliability, Risk and Safety: Theory and Application, 1(1), 35-44.‏
[16].    Abdelgawad, M., & Fayek, A. R. (2010). Risk management in the construction industry using combined fuzzy FMEA and fuzzy AHP. Journal of Construction Engineering and Management, 136(9), 1028-1036.‏
[17].    Ilangkumaran, M., Shanmugam, P., Sakthivel, G., & Visagavel, K. (2014). Failure mode and effect analysis using fuzzy analytic hierarchy process. International Journal of Productivity and Quality Management, 14(3), 296-313.‏
[18].    Liu, H. C., You, J. X., You, X. Y., & Shan, M. M. (2015). A novel approach for failure mode and effects analysis using combination weighting and fuzzy VIKOR method. Applied soft computing, 28, 579-588.‏
[19].    Liu, H. C., Fan, X. J., Li, P., & Chen, Y. Z. (2014). Evaluating the risk of failure modes with extended MULTIMOORA method under fuzzy environment. Engineering Applications of Artificial Intelligence, 34, 168-177.
[20].    Liu, H. C., You, J. X., Lin, Q. L., & Li, H. (2015). Risk assessment in system FMEA combining fuzzy weighted average with fuzzy decision-making trial and evaluation laboratory. International Journal of Computer Integrated Manufacturing, 28(7), 701-714.‏
[21].    Braglia, M., Frosolini, M., & Montanari, R. (2003). Fuzzy TOPSIS approach for failure mode, effects and criticality analysis. Quality and reliability engineering international, 19(5), 425-443.‏ 
[22].    Yang, J., Huang, H. Z., He, L. P., Zhu, S. P., & Wen, D. (2011). Risk evaluation in failure mode and effects analysis of aircraft turbine rotor blades using Dempster–Shafer evidence theory under uncertainty. Engineering Failure Analysis, 18(8), 2084-2092.‏
[23].    Oveisi, S., & Ravanmehr, R. (2017). SFTA-Based Approach for Safety/Reliability Analysis of Operational Use-Cases in Cyber-Physical Systems. Journal of Computing and Information Science in Engineering, 17(3).‏
[24].    Chang, C. L., Wei, C. C., & Lee, Y. H. (1999). Failure mode and effects analysis using fuzzy method and grey theory. Kybernetes.‏.
[25].    Wang, Y. M., Chin, K. S., Poon, G. K. K., & Yang, J. B. (2009). Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean. Expert systems with applications, 36(2), 1195-1207.‏.
[26].    Chanamool, N., & Naenna, T. (2016). Fuzzy FMEA application to improve decision-making process in an emergency department. Applied Soft Computing, 43, 441-453.‏ 
[27].    Opricovic, S., & Tzeng, G. H. (2004). Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS. European journal of operational research, 156(2), 445-455.‏
[28].    Zhu, P., Han, J., Liu, L., & Lombardi, F. (2015). A stochastic approach for the analysis of dynamic fault trees with spare gates under probabilistic common cause failures. IEEE Transactions on Reliability, 64(3), 878-892.‏
[29]    Tian, Z. P., Wang, J. Q., & Zhang, H. Y. (2018). An integrated approach for failure mode and effects analysis based on fuzzy best-worst, relative entropy, and VIKOR methods. Applied Soft Computing, 72, 636-646.‏ 
[30]    Fattahi, R., & Khalilzadeh, M. (2018). Risk evaluation using a novel hybrid method based on FMEA, extended MULTIMOORA, and AHP methods under fuzzy environment. Safety science, 102, 290-300.‏
[31]    Deng, X., & Jiang, W. (2017). Fuzzy risk evaluation in failure mode and effects analysis using a D numbers based multi-sensor information fusion method. Sensors, 17(9), 2086.‏ 
[32]    Selim, H., Yunusoglu, M. G., & Yılmaz Balaman, Ş., "A dynamic maintenance planning framework based on fuzzy TOPSIS and FMEA: application in an international food company, " Quality and Reliability Engineering International, 32(3), 2016,  pp. 795-804.‏
[33]    Barukab, O., Abdullah, S., Ashraf, S., Arif, M., & Khan, S. A. (2019). A New Approach to Fuzzy TOPSIS Method Based on Entropy Measure under Spherical Fuzzy Information. Entropy, 21(12), 1231.‏ 
[34]    Mangeli, M., Shahraki, A., & Saljooghi, F. H. (2019). Improvement of risk assessment in the FMEA using nonlinear model, revised fuzzy TOPSIS, and support vector machine. International Journal of Industrial Ergonomics, 69, 209-216.‏ 
[35]    Chai, K. C., Jong, C. H., Tay, K. M., & Lim, C. P. (2016). A perceptual computing-based method to prioritize failure modes in failure mode and effect analysis and its application to edible bird nest farming. Applied Soft Computing, 49, 734-747.‏
[36]    Wang, L. E., Liu, H. C., & Quan, M. Y. (2016). Evaluating the risk of failure modes with a hybrid MCDM model under interval-valued intuitionistic fuzzy environments. Computers & Industrial Engineering, 102, 175-185.‏
[37]    Zhao, H., You, J. X., & Liu, H. C. (2017). Failure mode and effect analysis using MULTIMOORA method with continuous weighted entropy under interval-valued intuitionistic fuzzy environment. Soft Computing, 21(18), 5355-5367.‏ 
[38]    Liu, H. C., You, J. X., & Duan, C. Y. (2019). An integrated approach for failure mode and effect analysis under interval-valued intuitionistic fuzzy environment. International Journal of Production Economics, 207, 163-172.‏ 
[39]    Huang, J., Li, Z. S., & Liu, H. C. (2017). New approach for failure mode and effect analysis using linguistic distribution assessments and TODIM method. Reliability Engineering & System Safety, 167, 302-309.‏