Tackling Demand Fluctuation through Novel Flexible Assembly Line Balancing Algorithm

Subject Areas : Line Balancing

Ari Setiawan ¹ , Christopher Yehuda ² , Eka Kurnia Asih Pakpahan ³

1 -
2 -
3 -

Received: 2025-08-02 Accepted : 2025-09-20 Published : 2025-09-21

Keywords: Assembly line, Flexibility, Line balancing, Takt-time, Smoothness index.,

Abstract :

This paper studied the situation faced by an upstream textile manufacturer company supplying seat cover fabrics to major automotive producers which need to dynamically adjust task distribution on their assembly line in response to demand fluctuations, while improving load balance among workstations. The company itself has implemented lean manufacturing concept, specifically the takt-time rules to organize the pace of its assembly line. Problems occur when demand increases significantly and one (or several) workstations in the assembly line suffers capacity insufficiency. To rectify the insufficiency, parallel processing becomes necessary. The company relies heavily on manual labor and has limited number of workers; therefore, parallel processing can only be implemented by utilizing the available workers. To do this, a new algorithm was designed. The algorithm works to identify which workstations suffer insufficiency, which workstations are available to perform parallel processing and how long the parallel processing should be performed. The algorithm is numerically tested. Four cases which cover various situations commonly found in real world assembly line are designed as test cases. The experiment showed that the new algorithm managed to reallocate tasks among workstations in such a way that the targeted takt-time was achieved while the line smoothness index was improved.

References:

[1] A. Qattawi and S. Chalil Madathil, “Assembly line design using a hybrid approach of lean manufacturing and balancing models,” Prod Manuf Res, vol. 7, no. 1, pp. 125–142, Jan. 2019, doi: 10.1080/21693277.2019.1604274.
[2] S. Tanjong Tuan, M. Radzi, B. Haji, and C. Daud, “Optimizing Lean Manufacturing Efficiency with Novel Line Balancing in the Automotive Exhaust Manufacturing Sector,” 2023.
[3] V. Sosa-Perez, J. Palomino-Moya, C. Leon-Chavarri, C. Raymundo-Ibañez, and F. Dominguez, “Lean Manufacturing Production Management Model focused on Worker Empowerment aimed at increasing Production Efficiency in the textile sector,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Apr. 2020. doi: 10.1088/1757-899X/796/1/012024.
[4] E. Álvarez-Miranda, S. Chace, and J. Pereira, “Assembly line balancing with parallel workstations,” Int J Prod Res, vol. 59, no. 21, pp. 6486–6506, 2021, doi: 10.1080/00207543.2020.1818000.
[5] H. Fazlollahtabar, H. Hajmohammadi, and A. Es’Haghzadeh, “A heuristic methodology for assembly line balancing considering stochastic time and validity testing,” International Journal of Advanced Manufacturing Technology, vol. 52, no. 1–4, pp. 311–320, Jan. 2011, doi: 10.1007/s00170-010-2708-1.
[6] H. F. Lee and R. V. Johnson, “A Line-Balancing Strategy for Designing Flexible Assembly Systems,” Kluwer Academic Publishers, 1991.
[7] P. P. Pal, V. Karandikar, S. Kuber, and V. Desai, “Efficiency Improvement and Capacity Enhancement using Line Balancing Technique,” International Journal of Current Engineering and Technology, vol. 10, no. 04, pp. 531–535, Jul. 2020, doi: 10.14741/ijcet/v.10.4.6.
[8] A. Syaharani Ibnu and A. U. Khasanah, “Enhancing Line Efficiency Performance at Assembly Line Using ECRS-Based Line Balancing Concept.”
[9] A. Kumar and R. Kumar, “Productivity Improvement of Assembly Line-by-Line Balancing Technique: Case Study Textile Manufacturing Company Karachi Pakistan,” South Asian Journal of Social Studies and Economics, vol. 21, no. 5, pp. 54–72, Mar. 2024, doi: 10.9734/sajsse/2024/v21i5814.
[10] W. Zhang, L. Hou, and R. J. Jiao, “Dynamic takt time decisions for paced assembly lines balancing and sequencing considering highly mixed-model production: An improved artificial bee colony optimization approach,” Comput Ind Eng, vol. 161, p. 107616, Nov. 2021, doi: 10.1016/J.CIE.2021.107616.
[11] G. N. Nur, M. A. Sadat, and B. M. Shahriar, “Assembly line balancing considering stochastic task times and production defects.”
[12] T. C. Lopes, A. S. Michels, C. G. S. Sikora, N. Brauner, and L. Magatão, “Assembly line balancing for two cycle times: Anticipating demand fluctuations,” Comput Ind Eng, vol. 162, p. 107685, Dec. 2021, doi: 10.1016/J.CIE.2021.107685.
[13] N. P. Campana, M. Iori, and M. C. O. Moreira, “Exact and heuristic solutions for the assembly line balancing problem with hierarchical worker assignment,” Apr. 2020, [Online]. Available: http://arxiv.org/abs/2004.13396
[14] A. S. Michels and A. M. Costa, “Model and heuristics for the multi-manned assembly line worker integration and balancing problem,” Int J Prod Res, vol. 62, no. 24, pp. 8719–8744, 2024, doi: 10.1080/00207543.2024.2347572.
[15] J. Miltenburg, “U-shaped production lines: A review of theory and practice,” Int J Prod Econ, vol. 70, no. 3, pp. 201–214, Apr. 2001, doi: 10.1016/S0925-5273(00)00064-5.
[16] I. Kucukkoc and D. Z. Zhang, “Mixed-model parallel two-sided assembly line balancing problem: A flexible agent-based ant colony optimization approach,” Comput Ind Eng, vol. 97, pp. 58–72, Jul. 2016, doi: 10.1016/J.CIE.2016.04.001.
[17] I. Kucukkoc, “Balancing of two-sided disassembly lines: Problem definition, MILP model and genetic algorithm approach,” Comput Oper Res, vol. 124, p. 105064, Dec. 2020, doi: 10.1016/J.COR.2020.105064.