References:
1- G. Xu, B. Zhu, Y. Han, and Z. Bo,"Covalent functionalization of multi-walled
carbon nanotube surfaces by conjugatedpolyfluorene," Polymer, vol. 48, pp. 7510-
7515, 2007.
2- M. V. Naseh, A. A. Khodadadi, Y.Mortazavi, O. A. Sahraei, F. Pourfayaz, and S.
M. Sedghi, "Functionalization of CarbonNanotubes Using Nitric Acid Oxidation and
DBD Plasma," World Academy of Science,Engineering and Technology, vol. 49, 2009.
3- J. Cho, S. Schaab, J. A. Roether, and A. R.Boccaccini, "Nanostructured carbon
nanotube/TiO2 composite coatings usingelectrophoretic deposition (EPD)," Nanopart
Res, vol. 10, pp. 99–105, 2008.
4- A. Ellis, K. Vijayamohanan, R. Goswami,N. Chakrapani, L. amanathan, and P. Ajayan,
"Hydrophobic anchoring ofmonolayerprotected gold nanoclusters to
carbon nanotubes," Nano Lett, vol. 3, pp. 279–282, 2003.
5- L. C. Jiang and W. D. Zhang,"Electrodeposition of TiO2 Nanoparticles on
Multiwalled Carbon Nanotube Arrays forHydrogen Peroxide Sensing," Electroanalysis,vol. 21, pp. 988 – 993, 200. ٩
6- B. R. Huang, T. C. Lin, Y. K. Yang, and S.D. Tzeng, "The stability of the CNT/Ni field
emission cathode fabricated by the compositeplating method," Diamond & Related
Materials, vol. 19, pp. 158–161, 2010.
7- K. Y. Lee, M. Kim, J. Hahn, J. S. Suh ,I.Lee, K. Kim, and S. W. Han, "Assembly of
Metal Nanoparticle-Carbon NanotubeComposite Materials at the Liquid/Liquid
Interface," Langmuir, vol. 22, pp. 1817-1821,2006.
8- C. Cui, H. Liu, Y. Li, J. Sun, R. Wang, S.Liu, and L. Greer, "Fabrication and
biocompatibility of nano-TiO2/titanium alloysbiomaterials," Mater Lett, vol. 59, pp. 3144–
3148, 2005.
9- K. Hashimoto and I. H. Fujishima, "TiO2photocatalysis: A historical overview and
future prospects," Appl Phys Part 1–Regul PapBrief Commun Rev Pap vol. 44, pp. 8285–
8269, 2005.
10- A. Jitianu, T. Cacciaguerra, S. Benoit, S.Delpeux, F. Beguin, and S. Bonnamy,
"Synthesis and characterization of carbonnanotubes-TiO2 nanocomposites," Carbon,
vol. 42, pp. 1147–1151, 2004.
11- M. I. Chen, F. J. Zhang, and W. C. Oh,"Synthesis, characterization, and
photocatalytic analysis of CNT/TiO2composites derived from MWCNTs and
titanium sources," NEW CARBONMATERIALS vol. 42, pp. 159–166, 2009.
12- N. Bouazza, M. Ouzzine, M. A. L.-R.denas, D. Eder, and A .Linares-Solano, "TiO2
nanotubes and CNT–TiO2 hybrid materials forthe photocatalytic oxidation of propene at low
concentration," Applied Catalysis B:Environmental, vol. 92, pp. 377–383, 2009.
13- Q. Huang and L. G, Mater. Chem, vol. 13,p. 1517, 2003.
14- S. W. Kim, T. Kim, Y. S. Kim, H. S. Choi,H. J. Lim, S. J. Yang, and C. R. Park, "Surface
modifications for the effective dispersion ofcarbon nanotubes in solvents and polymers,"
Carbon, vol. 50, pp. 3-33, 2012.
15- Y. C. Chiang, W. H. Lin, and Y. C .Chang,"The influence of treatment duration on multiwalled
carbon nanotubes functionalized byH2SO4/HNO3 oxidation," Applied Surface
Science, vol. 257, pp. 2401–2410, 2011.
16- C. Y. Hu, F. Y. Li, L. HU, and R. B.Zhang, "A study concerning the pretreatment
of CNTs and its influence on the performanceof NiB/CNTs amorphous catalyst," Serb.
Chem. Soc, vol. 71, pp. 1153–1160, 2006.
17- W. Huang, Y. Wang, G. Luo, and F. Wei,"99.9% purity multi-walled carbon nanotubes
by vacuum high-temperature annealing,"Carbon, vol. 41, pp. 2585-2590, 2003.
18- P. Dubey, S. ash, and R. M. a.S.Sarkar,
"Synthesis and characterization of watersolublecarbon nanotubes from mustard soot,"
Indian Academy of Sciences, vol. 65, pp. 681-697, 2005.
19- R. Tian, X. W, M. Li ,H. Hu, R. Chen, F.Liu, H. Zheng, and L. Wan, "An efficient route
to functionalize singe-walled carbon nanotubesusing alcohols," Applied Surface Science, vol.
255, pp. 3294–3299, 2008.
20- S. K. Yadav, S. R. Madeshwaran, and J.W. Cho, "Synthesis of a hybrid assembly
composed of titanium dioxide nanoparticlesand thin multi-walled carbon nanotubes using
click chemistry," Colloid and InterfaceScience, 2011.
21- T. Imae and S. Ikeda, "The pH dependenceof dispersion of TiO2 particles in aqueous
surfactant solutions," Colloid Polym. Sci, vol.269, pp. 43–48, 1991.
22- N. Mandzy and T. Druffel, "Breakage ofTiO2 agglomerates in electrostatically
stabilized aqueous dispersions," PowderTechnol, vol. 160, pp. 121–126, 2005.
23- C. Hai, H. Watanabe, F. Wang, T. Shirai,and M. Takahashi, "Evaluation of surfactantfree
stabilized vapor grown carbon fibers withzeta potential and Raman spectroscopy,"
Colloids and Surfaces A: Physicochem. Eng.Aspects, vol. 381, pp. 70-73, 2011.
24- D. L. Liao and B. Q. Liao , " Zeta potentialof shape-controlled TiO2 nanoparticles with
surfactants," Colloids and Surfaces A:Physicochem. Eng. Aspects, vol. 348, pp. 270–
275, 2009.
25- Z. Talaei, A. R. Mahjoub, A. M. Rashidi,A. Amrollahi, and M. E. Meibodi, "The effect
of functionalized group concentration on thestability and thermal conductivity of carbon
nanotube fluid as heat transfer media,"International Communications in Heat andMass Transfer, 2011.
26- H. Hu, A. Yu, E. Kim, B. Zhao, M. E.Itkis, E. Bekyarova, and R .C. Haddon,
"Influence of the Zeta Potential on theDispersability and Purification of SingleWalled
Carbon Nanotubes " Phys. Chem. Bvol. 109, pp. 11520-11524, 2005.
27- L. Chen, H. Xie, Y. Li, and W. Yu,"Applications of cationic gemini surfactant in
preparing multi-walled carbon nanotubecontained nanofluids," Colloids and Surfaces
A: Physicochem. Eng. Aspects, vol. 330, pp.176–179, 2008.
