Subject Areas : journal of New Materials

لیلا فتح یونس ¹ (کارشناس ارشد مهندسی متالورژی و مواد، دانشگاه صنعتی سهند)
مازیار آزادبه ² (دانشیار دانشکده مهندسی متالورژی و مواد، دانشگاه صنعتی سهند)
فضه حیدری ³ (کارشناس مهندسی شیمی)

Received: 2015-12-29 Accepted : 2015-12-29 Published : 2012-06-21

Keywords:

References:

1- T. S. N.Sankara Narayanan, “Surfacepretreatment by phosphate conversion coatinga

review”, National Metallurgy Laboratory,India, 9, 130-17, 2005.

2- W. Rausch, “The phosphating of Metals”,ASM International, 434-365, 1990.

3- N. L. yuan, “Cathodic phosphate coatingcontaining nano zinc particles on magnesium

alloy”, Trans. Nonferrous Met. Soc. China, 18,365-368, 2008.

4- M. C. M.Farias, C.A. L.Santos, Z.panossian, A.Sinatora, “Fricion behavior of

lubricated Zinc Phosphate coatings”, Wear,266, 873-877, 2009.

5- Metals handbook, 9th Ed, vol. 5, pp: 379-404.

6- G. Song, “Electroless deposition of a prefilmof electrophoresis coating and its

corrosion resistance on an Mg alloy”,Electrochimica Acta, 55, 2258–2268, 2010 .

7- M. Manna, “Characterisation of phosphatecoatings obtained using nitric acid free

phosphate solution on three steel substrates:An option to simulate TMT rebars surfaces”,

Surface & Coatings Technology, 203, 1913–1918, 2009 .

8- P. E. Tegehall, and N. G. Vanerberg,“Nucleation and formation of zinc phosphate

conversion coating on cold-rolled steel”,Corrosion Science, 32, 635-652, 1991.

9- C. T. Yap, T. L. Tan, L. M. Gan,“Evaluation of zinc phosphate coating on cold

rolled steel surface by X-Ray fluorescencetechnique”, Apllied Surface Science, 27, 247-

254, 1986.

10- D. Susaca, X. Suna, R. Y. Lia, K. C.Wonga, P. C. Wonga, K. A. R.Mitchella, R.

Champaneria, “Microstructural effects on theinitiation of zinc phosphate coatings on 2024-

T3 aluminum alloy”, Applied Surface Science,

239, 45–59, 2004.

11- T. Biestek and j. Weber, “Electrolytic andchemical conversion coatings, A concise

surrey of their production, properties andtesting” Wgdawnictwa Naukowo Technicane, ,

128-224, 1976.

12- S. Jegannathana, T.K. Arumugama, T. S.N.Sankara, K. Ravichandranc, “Formation and

characteristics of zinc phosphate coatingsobtained by electrochemical treatment:

Cathodic vs. anodic”, Progress in OrganicCoatings, 65, 229–236, 2009 .

13- S. Jegannathan, T.S.N. Sankara, K.Ravichandran, S. Rajeswari, “Formation of

zinc phosphate coating by anodicelectrochemical treatment”, Surface &

Coatings Technology, 200, 6014–6021, 2006.

14- F. Mansfeld, J. B. lumsden, S. L. J.jaquet& S. Tsai, “Corrosion control by organic

coatings”, publisher: NACE NationalAssociation of Corrosion Engineers, 227-273,

1989.

15- J. K. Yang, J. G. Kim, J. S. Chun, “A studyof the effect of ultrasonics on manganese

phosphating of steel”, Thin Solid Films, 101,193-200, 1983.

16- W. J. Wittke, “Phosphate coating”, MetalFinishing, 576-620, 1980.

17- S. Scislowski, “phosphating, part II-TotalAcid, free Acid and pH”, Metal Finishing, 84,

35-40, 1991.

18- Din-50942, “Phosphating of metals”, 1987.

19- L. A. Isaicheva, N. M. Trepak, A. L.L’vov, “The kinetics of phosphate film

formation on the type MA 21 magnesium–Lithium Alloys”, Protection of Metals, 42,

389–393, 2006.

20- E. L. Ghali, R. J. A. Potvin, “Themechanism of phosphating of steel”, CorrosionScience, 12 583-594, 1972.

21- G. Y. Li, J. S. Lianand, L. Y. Niu, “Growthof zinc phosphate coatings on AZ91Dmagnesium alloy”, Surface & CoatingsTechnology, 201 1814–1820, 2006.

22- L. Y. Niu, Z. H. Jiang, G. Y. Li, C. D. Gu,J. S. Lian, “A study and application of zinc

phosphate coating on AZ91D magnesiumalloy”, Surface & Coatings Technology, 200,

3021– 3026, 2006.

13- M. Sheng, Ch. Wanga, Q. Zhong, Y. Wei,Y. Wang, “Ultrasonic irradiation and its

application for improving the corrosionresistance of phosphate coatings on aluminum

alloys”, Ultrasonics Sonochemistry, 17, 21–25,2010.

24- E. P. Banczek, P. R. P.Rodrigues, I. Costa,“Investigation on the effect of benzotriazole on

the phosphating of carbon steel”, Surface &Coatings Technology, 201, 3701–3708, 2006.

25- Ch. M. Wang, H. Ch. Liau, W. T. Tsai,“Effects of temperature and applied potential

on the micro structure and electrochemicalbehavior of manganes phosphate coating”,

Surface & Coatings Technology, 201, 2994-3001, 2006.

26- Sh. L. Zhang, “The growth of zincphosphate coatings on 6061-Al alloy”, Surface

& Coatings Technology, 202, 1674-1680,2008.

27- B. Cheng, “Studies of phosphateconversion coatings on pure aluminium”, the

university of Western Ontario London,Department of chemistry, 1996.

28- CH. Ying-liang, W. Hai-lan, CH. Zhenhua,W. Hui-min, “Phosphating process of

AZ31 magnesium alloy and corrosionresistance of coatings”, Trans. NonferrousMet. SOCC. Hina, 16, 1086-1091, 2006.

29- L. Kouisnia, M. Azzia, F. Dalardb, S.Maximovitch, “Phosphate coatings on

magnesium alloy AM60 Part 2:Electrochemical behaviour in borate buffer

solution”, Surface & Coatings Technology,192, 239– 246, 2005 .

30- N. Satoh and T. Minami, “Relationshipbeween the formation of zinc phosphate

crystals and their electrochemical properties”,Surface and Coating Technology, 34, 331-343,. 1988.