Investigation of iron effect on synthesis of Si3N4 by using carbothermal reduction and nitridation process from MCM-48/Saccharose precursor

Subject Areas :

Ali Ghalamzan ¹ , Amirabbas Nourbakhsh ² , Mojtaba Nasr Esfahani ³ , Rouzbeh Javad Kalbasi ⁴

1 - کارشناس ارشد، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد
2 - دانشیار، دانشکده فنی و مهندسی، واحد شهرضا، دانشگاه آزاد اسلامی، شهرضا، اصفهان
3 - استادیار، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد
4 - استادیار، دانشکده شیمی، واحد شهرضا، دانشگاه آزاد اسلامی، شهرضا، اصفهان

Received: 2016-04-03 Accepted : 2016-04-03 Published : 2017-02-19

Keywords:

References:

[1]     K. H. Jack & W. I. Wilson., “Ceramics based on the Si–Al–ON and related systems”, Nature, Vol. 28, pp. 281–239, 1972.

 

[2]     F. Wang, F. Qin, G. Qiang Jin, W. Yong & X. Yun Guo, “synthesis and characterization of Si₃N₄ thin nanobelts via direct nitridation of Si powder”, physica E 41, pp.120-123, 2008.

 

[3]     M. V. Vlasova, T. S. bartnitskaya, L. L. Sukhikh, L. A. Tomila & T. V. Krushinskaya, “mechanism of Si₃N₄ nucleation during carbothermal reduction of silica”, journal of materials science, Vol. 30, pp. 5263-5271, 1995.

 

[4]     Q. Yong-Xin, L. Mu-Sen, W. Cheng-Gao, B. Yu-Jin, B. Zhu & W. Yan-Xiang, “low-temperature preparation of silicon nitride via chemical metathesis route”, materials letters, Vol. 58, pp. 3345-3347, 2004.

 

[5]     Y. Zhao, Q. Liu & H. Zhou, “synthesis of pure rod- like α-Si₃N₄ powder with in situ C/SBA-15 composite”, ceramics internationalσ, Vol. 38, pp. 6059-6062, 2012.

 

[6]     A. K. waterw, A. Sawka & D. K. watera, “amorphous Si₃N₄ layers synthesized on cemented carbide tools using an atmospheric pressure CVD method,surface and coatings technology”, Vol. 88, pp. 12-16, 1996.

 

[7]     T. Kawahito & T. Iwai, “Poroceeding of the International Symposium on Ceramic Components for Engines”, p. 333, 1983.

 

[8]     D. Gu, F. Zhang, Y. Shi, Y. Zhang, F. Wu, Z. Deng, Y. Zhang, L. Tu & B. Zhao, “teardown method to create large mesotunnels on the pore walls of ordered mesoporous silica”, J. Colloidand Interface Science, Vol. 328, pp. 338-343, 2008.

 

[9]     X. Zhao, S. Lu & G. Q, “Nanoporous materials-science and engineering”, Imperial College Press, londan, Vol. 4, pp. 6-11, 2004.

 

[10] K. H. Jack, “The Fabrication of Dense Nitrogen Cer­amics. In Hayne-Palmour IV: Processing of Crystalline Ceramics”, Materials Science Research, Plenum, Vol. 11, p. 561, 1978.

 

[11] R. K. Iler, “The chemistry of silica: solubility, polymerizatio colloid and surface properties biochemistry”, John Wiley & Sons, 1979.

 

[12] W. D. B. I. Parsons & D. S. Montgometry, Mine Branch Technical Survey, TB26, 1961.

 

[13] S. J. Gregg & K. S. W. Sing, “Adsorption, Surface Area and Porosity”, Academic Press, London, 1982.

 

[14] K. Chen, Z. Huang, Y. G. Liu, M. Fang & J. Huang, “Synthesis of β-Si₃N₄ powder from quartz via carbothermal reduction nitridation”, powder technology, Vol. 235, pp. 728-734, 2013.