Expert System Optimizing Model of Filament Winding Process for Improved Automated Composite Manufacturing Structure
Subject Areas : Decision Support Systems
Faris AL-Oqla
1
(The Hashemite University)
Keywords:
Abstract :
[1] Almagableh, A., Al-Oqla, F.M., Omari, M.A., (2017). Predicting the Effect of Nano-Structural Parameters on the Elastic Properties of Carbon Nanotube-Polymeric based Composites. International Journal of Performability Engineering 13, 73.
[2] AL-Oqla, F.M., Almagableh, A., Omari, M.A., (2017). Design and Fabrication of Green Biocomposites, Green Biocomposites. Springer, Cham, Switzerland, pp. 45-67.
[3] AL-Oqla, F.M., Hayajneh, M.T., (2007). A design decision-making support model for selecting suitable product color to increase probability, Design Challenge Conference: Managing Creativity,
Innovation, and Entrepreneurship. Yarmouk University, Amman, Jordan, .
[4] Alves, C., Ferrão, P., Silva, A., Reis, L., Freitas, M., Rodrigues, L., Alves, D., (2010). Ecodesign of automotive components making use of natural jute fiber composites. J. Cleaner Prod. 18, 313-327.
[5] Siwal, S.S., Zhang, Q., Devi, N., Saini, A.K., Saini, V., Pareek, B., Gaidukovs, S., Thakur, V.K., (2021). Recovery processes of sustainable energy using different biomass and wastes. Renewable and
Sustainable Energy Reviews 150, 111483.
[6] Jawarneh, A.M., Al-Oqla, F.M., Jadoo, A.A., (2021). Transient behavior of non-toxic natural and hybrid multi-layer desiccant composite materials for water extraction from atmospheric air. Environmental Science and Pollution Research, 1-10.
[7] Al-Oqla, F.M., (2021a). Predictions of the Mechanical Performance of Leaf Fiber Thermoplastic Composites by FEA. International Journal of Applied Mechanics.
[8] Alaaeddin, M., Sapuan, S., Zuhri, M., Zainudin, E., Al-Oqla, F.M., (2019). Photovoltaic applications: Status and manufacturing prospects. Renewable and Sustainable Energy Reviews 102, 318-332.
[9] Beluns, S., Gaidukovs, S., Platnieks, O., Gaidukova, G., Mierina, I., Grase, L., Starkova, O., Brazdausks, P., Thakur, V.K., (2021). From Wood and Hemp Biomass Wastes to Sustainable Nanocellulose Foams. Industrial Crops and Products 170, 113780.
[10] Hayajneh, M., AL-Oqla, F.M., Aldhirat, A., (2021a). Physical and Mechanical Inherent Characteristic Investigations of Various Jordanian Natural Fiber Species to Reveal Their Potential for Green Biomaterials. J. Nat. Fibers, 1-14.
[11] Barbero, E.J., (2010). Introduction to composite materials design. CRC press, Boca Raton, USA.
[12] Hambali, A., Sapuan, S., Ismail, N., Nukman, Y., (2009). Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage. Sci Res Essay 4, 198-211.
[13] Fares, O., AL-Oqla, F.M., Hayajneh, M.T., (2019). Dielectric relaxation of Mediterranean Lignocellulosic Fibers for Sustainable Functional Biomaterials. Materials Chemistry and Physics.
[14] Al-Oqla, F.M., Al-Jarrah, R., (2021a). A novel adaptive neuro-fuzzy inference system model to predict the intrinsic mechanical properties of various cellulosic fibers for better green composites. Cellulose.
[15] Rana, A.K., Frollini, E., Thakur, V.K., (2021). Cellulose nanocrystals: Pretreatments, preparation strategies, and surface functionalization. International Journal of Biological Macromolecules 182, 1554-1581.
[16] AL-Oqla, F.M., (2021b). Effects of Intrinsic Mechanical Characteristics of Lignocellulosic Fibres on the Energy Absorption and Impact Rupture Stress of Low Density Polyethylene Biocomposites.
International Journal of Sustainable Engineering, 1-9.
[17] AL-Oqla, F., Thakur, V.K., (2021). Toward chemically treated lowcost lignocellulosic parsley waste/polypropylene bio-composites for resourceful sustainable bio-products. International Journal of Environmental Science and Technology, 1-10.
[18] AL-Oqla, F.M., Alothman, O.Y., Jawaid, M., Sapuan, S., Es-Saheb, M., (2014a). Processing and Properties of Date Palm Fibers and Its Composites, Biomass Bioenergy. Springer, Cham, Switzerland, pp. 1- 25.
[19] Al-Oqla, F.M., Omar, A.A., (2012). A decision-making model for selecting the GSM mobile phone antenna in the design phase to increase over all performance. Progress In Electromagnetics Research C 25, 249-269.
[20] AL-Oqla, F.M., El-Shekeil, Y., (2019). Investigating and Predicting the Performance Deteriorations and Trends of Polyurethane Biocomposites for More Realistic Sustainable Design Possibilities. J. Cleaner Prod.
[21] Rababah, M.M., AL-Oqla, F.M., (2020). Biopolymer Composites and Sustainability, Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers. Elsevier, pp. 1-10.
[22] Al-Oqla, F.M., Omar, A.A., (2015). An expert-based model for selecting the most suitable substrate material type for antenna circuits. International Journal of Electronics 102, 1044-1055.
[23] AL-Oqla, F.M., Omar, A.A., Fares, O., (2018a). Evaluating sustainable energy harvesting systems for human implantable sensors. International Journal of Electronics 105, 504-517.
[24] AL-Oqla, F.M., S. M. Sapuan, M. R. Ishak, A.A., N., (2015a). Selecting Natural Fibers for Industrial Applications, Postgraduate Symposium on Biocomposite Technology Serdang, Malaysia.
[25] AL-Oqla, F.M., Salit, M.S., (2017a). Materials Selection for Natural Fiber Composites. Woodhead Publishing, Elsevier, Cambridge, USA.
[26] Al-Oqla, F.M., (2021c). Performance trends and deteriorations of lignocellulosic grape fiber/polyethylene biocomposites under harsh environment for enhanced sustainable bio- materials. Cellulose 28, 2203-2213.
[27] AL-Oqla, F.M., (2017). Investigating the mechanical performance deterioration of Mediterranean cellulosic cypress and pine/polyethylene composites. Cellulose 24, 2523-2530. [28] AL-Oqla, F.M., Salit, M.S., (2017b). Materials selection, Materials Selection for Natural Fiber Composites. Woodhead Publishing, Elsevier Cambridge, USA, pp. 49-71.
[29] AL-Oqla, F.M., Salit, M.S., (2017c). Material selection for composites, Materials Selection for Natural Fiber Composites. Woodhead Publishing, Elsevier Cambridge, USA, pp. 73-105.
[30] AL-Oqla, F.M., Sapuan, S., (2018). Natural Fiber Composites, in: S. M. Sapuan, M.R.I., J. Sahari, Muhammed Lamin Sanyang (Ed.), Kenaf Fibers and Composites. CRC Press.
[31] Voicu, S.I., Thakur, V.K., (2021). Aminopropyltriethoxysilane As A Linker For Cellulose-Based Functional Materials: New Horizons And Future Challenges. Current Opinion in Green and Sustainable Chemistry, 100480.
[32] Hayajneh, M.T., AL-Oqla, F.M., Mu’ayyad, M., (2021b). Hybrid green organic/inorganic filler polypropylene composites: Morphological study and mechanical performance investigations. e-Polymers 21, 710- 721.
[33] Quanjin, M., Rejab, M., Sahat, I., Amiruddin, M., Bachtiar, D., Siregar, J., Ibrahim, M., (2018). Design of portable 3-axis filament winding machine with inexpensive control system. Journal of Mechanical Engineering and Sciences 12, 3479-3493.
[34] Zu, L., Xu, H., Wang, H., Zhang, B., Zi, B., (2019). Design and analysis of filament-wound composite pressure vessels based on nongeodesic winding. Composite Structures 207, 41-52.
[35] Dun, M., Hao, J., Wang, W., Wang, G., Cheng, H., (2019). Sisal fiber reinforced high density polyethylene pre-preg for potential application in filament winding. Compo. Part B: Eng. 159, 369-377.
[36] Du, H., Liu, L., Zhang, F., Leng, J., Liu, Y., (2018). Shape retainability and reusability investigation of bottle-shaped SMP mandrel. Polym. Test. 69, 325-331.
[37] Zu, L., Xu, H., Zhang, B., Li, D., Zi, B., (2018). Design of filamentwound composite structures with arch-shaped cross sections considering fiber tension simulation. Composite Structures 194, 119-125.
[38] Nourian, R., Mousavi, S.M., Raissi, S., (2019). A fuzzy expert system for mitigation of risks and effective control of gas pressure reduction stations with a real application. J. Loss Prev. Process Indust. 59, 77-90.
[39] Ghasemi, F.A., Raissi, S., Malekzadehfard, K., (2013). Analytical and mathematical modeling and optimization of fiber metal laminates (FMLs) subjected to low-velocity impact via combined response surface regression and zero-one programming. Latin American Journal of Solids and Structures 10, 391-408.
[40] Sadr Dadras, F., Gharanjig, K., Raissi, S., (2014). Optimising by response surface methodology the dyeing of polyester with a liposome‐ encapsulated disperse dye. Coloration Technology 130, 86-92.
[41] Shokuhfar, A., Khalili, S., Ghasemi, F.A., Malekzadeh, K., Raissi, S., (2008). Analysis and optimization of smart hybrid composite plates subjected to low-velocity impact using the response surface methodology (RSM). Thin-Walled Structures 46, 1204-1212.
[42] AL-Oqla, F.M., Sapuan, S., Fares, O., (2018b). Electrical–Based Applications of Natural Fiber Vinyl Polymer Composites, Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites. Elsevier, pp. 349-367.
[43] AL-Oqla, F.M., Sapuan, S., Ishak, M., Nuraini, A., (2015b). Predicting the potential of agro waste fibers for sustainable automotive industry using a decision making model. Comput. Electron. Agric. 113, 116-127.
[44] Aridi, N., Sapuan, S., Zainudin, E., AL-Oqla, F.M., (2016). Mechanical and morphological properties of injection-molded rice husk polypropylene composites. Int. J. Polym. Anal. Charact. 21, 305- 313.
[45] AL-Oqla, F.M., Sapuan, S., Jawaid, M., (2016). Integrated Mechanical-Economic–Environmental Quality of Performance for Natural Fibers for Polymeric-Based Composite Materials. J. Nat. Fibers 13, 651-659.
[46] AL‐Oqla, F.M., Hayajneh, M.T., Aldhirat, A., (2021). Tribological and mechanical fracture performance of Mediterranean lignocellulosic fiber reinforced polypropylene composites. Polymer Composites.
[47] AL-Oqla, F., Alaaeddin, M., El-Shekeil, Y., (2021). Thermal stability and performance trends of sustainable lignocellulosic olive/low density polyethylene biocomposites for better environmental green materials. Engineering Solid Mechanics 9, 439-448.
[48] AL-Oqla, F.M., Hayajneh, M.T., (2020). A hierarchy weighting preferences model to optimise green composite characteristics for better sustainable bio-products. International Journal of Sustainable Engineering, 1-6.
[49] Mazumdar, S., (2001). Composites manufacturing: materials, product, and process engineering. CrC press. [50] AL-Oqla, F.M., Sapuan, M.S., Ishak, M.R., Aziz, N.A., (2014b). Combined multi-criteria evaluation stage technique as an agro waste evaluation indicator for polymeric composites: date palm fibers as a case study. BioResources 9, 4608-4621.
[51] AL-Oqla, F.M., Al-Jarrah, R., (2021b). A novel adaptive neuro-fuzzy inference system model to predict the intrinsic mechanical properties of various cellulosic fibers for better green composites. Cellulose, 1-12.
[52] AL-Oqla, F.M., (2020). Flexural Characteristics and Impact Rupture Stress Investigations of Sustainable Green Olive Leaves Biocomposite Materials. Journal of Polymers and the Environment, 1-8.
[53] Al-Widyan, M.I., Al-Oqla, F.M., (2014). Selecting the most appropriate corrective actions for energy saving in existing buildings A/C in hot arid regions. Building Simulation 7, 537-545.
[54] Dalalah, D., Al-Oqla, F., Hayajneh, M., (2010). Application of the Analytic Hierarchy Process (AHP) in multi-criteria analysis of the selection of cranes. Jordan Journal of Mechanical and Industrial Engineering, JJMIE 4, 567-578.
[55] Deng, X., Hu, Y., Deng, Y., Mahadevan, S., (2014). Supplier selection using AHP methodology extended by D numbers. Expert Systems with Applications 41, 156-167.
[56] Taylan, O., Bafail, A.O., Abdulaal, R., Kabli, M.R., (2014). Construction projects Selection and risk assessment by Fuzzy AHP and Fuzzy TOPSIS methodologies. Applied Soft Computing.
[57] Al-Widyan, M.I., Al-Oqla, F.M., (2011). Utilization of supplementary energy sources for cooling in hot arid regions via decision-making model. International Journal of Engineering Research and Applications 1, 1610-1622.