Robust Cluster-Based method for monitoring generalized linear profiles in phase I

Subject Areas : Statistical Quality Control

Davood Saremian ¹ , Rassoul Noorossana ² , Sadigh Raissi ³ , Paria Soleimani ⁴

1 - Department of Industrial Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
2 - Industrial Engineering Department, Iran University of Science and Technology
3 - Department of Industrial Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
4 - Department of Industrial Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran

Received: 2021-01-16 Accepted : 2021-07-06 Published : 2021-03-01

Keywords:

References:

[1] Amiri A, Koosha, M., Azhdari & Aand Wang G. (2014). Phase
I monitoring of generalized linear model-based regression
profiles. Journal of Statistical Computation and Simulation,
85(14), 2839-2859. doi:10.1080/00949655.2014.942864

 

[2] Aly, A. A., Mahmoud, M. A., & Woodall, W. H. (2014). A
Comparison of the Performance of Phase II Simple Linear
Profile Control Charts when Parameters are estimated.
Communications in Statistics - Simulation and Computation,
44(6), 1432–1440. doi:10.1080/03610918.2013.821484

 

[3] Bahiraee Ehsan, Raissi Sadigh, (2014), Economic design of
Hotelling’s T2 control chart on the presence of fixed sampling
rate and exponentially assignable causes, Journal of Industrial
Engineering International, a Springer Journal, December
2014, Volume 10, Issue 4, pp 229–238, ISSN: 1735-5702.

 

[4] Cantoni, E., & Ronchetti, E. (2001). Robust inference for
generalized linear models. Journal of the American Statistical
Association, 96(455), 1022-1030.

 

[5] Change Point Method for Monitoring Generalized Linear
Profiles in Phase I. Quality and Reliability Engineering
International, 31(8), 1367-1381. doi:10.1002/qre.1671

 

[6] Chen, S., & Nembhard, H. B. (2010). A high-dimensional
control chart for profile monitoring. Quality and Reliability
Engineering International, 27(4), 451–464. doi:10.1002/
qre.1140

 

[7] Chen, Y., Birch, J. B., & Woodall, W. H. (2015). Cluster-Based
Profile monitoring in phase 1. Journal of Quality Technology,
47(1), 14-29. doi:10.1080/00224065.2015.11918103
[8] Cheung, J. M. Y., Bartlett, D. J., Armour, C. L., Laba, T. L., &
Saini, B. (2018). To drug or not to drug: A qualitative study of
patients’ decision-making processes for managing
insomnia. Behavioral Sleep Medicine, 16(1), 1-26.
doi:10.1080/15402002.2016.1163702
[9] Hakimi, A., Amiri, A., & Kamranrad, R. (2017). Robust
approaches for monitoring logistic regression profiles under
outliers. International Journal of Quality & Reliability
Management, 34(4), 494-507. doi:10.1108/ijqrm-04-2015-
0053
[10] Izadbakhsh, H., Noorossana, R., & Niaki, S. T. A. (2018).
Monitoring multinomial logistic profiles in Phase I using log-
linear models. International Journal of Quality & Reliability
Management, 35(3), 678-689. doi:10.1108/ijqrm-04-2017-
0068
[11] Jensen WA, Birch JB, & Woodall WH. Monitoring Correlation
Within Linear Profiles Using Mixed Models. Journal of Quality
Technology 2008, 40(2), 167–183. doi:10.1080/00224065.
2008.11917723.
[12] Kang, L., & Albin, S. L. (2000). On-Line Monitoring When the
Process Yields a Linear Profile. Journal of Quality Technology,
32(4), 418 426. doi:10.1080/00224065.2000. 11980027
[13] Koosha, A. A. a. M. (2011). The Effect of Neglecting
Autocorrelation on the Performance of T2 Control Charts in
Monitoring of Logistic Profiles. Proceedings of the 2011 IEEE
ICQR.
[14] Koosha, M., & Amiri, A. (2012). Generalized linear mixed
model for monitoring autocorrelated logistic regression
profiles. The International Journal of Advanced Manufacturing
Technology, 64(1-4), 487-495. doi:10.1007/s00170-012-4018-
2
[15] Li, C.-I., Pan, J.-N., & Liao, C.-H. (2019). Monitoring nonlinear
profile data using support vector regression method. Quality
and Reliability Engineering International, 35(1), 127-135.
doi:https://doi.org/ 10.1002/qre.2385
[16] Moheghi, H. R., Noorossana, R., & Ahmadi, O. (2020). GLM
profile monitoring using robust estimators. Quality and
Reliability Engineering International, 1– 17.doi:https://doi.org/
10.1002/qre.2755
[17] McCullagh, P. and Nelder, J.A. (1989) Generalized Linear
Models, second edition, Chapman & Hall, London, UK.

 

[18] Nikoo, M., & Noorossana, R. (2012). Phase II Monitoring of Nonlinear Profile Variance Using
Wavelet. Quality and Reliability Engineering International, 29(7), 1081-1089.
doi:10.1002/qre.1460
[19] Noorossana, R., Eyvazian, M., Amiri, A., & Mahmoud, M. A. (2010). Statistical monitoring of
multivariate multiple linear regression profiles in phase I with calibration application. Quality
and Reliability Engineering International, 26(3), 291–303. doi:10.1002/qre.1066
[20] Olsson, U. (2002). Generalized Linear Models: An Applied Approach: Lightning Source.
[21] Pan, J.-N., Li, C.-I., & Lu, M. Z. (2019). Detecting the process changes for multivariate nonlinear
profile data. Quality and Reliability Engineering International, 35(6), 1890-1910.
doi:https://doi.org/10.1002/qre.2482
[22] Paynabar, K., Jin, J., & Pacella, M. (2013). Monitoring and diagnosis of multichannel nonlinear
profile variations using uncorrelated multilinear principal component analysis. IIE Transactions,
45(11), 1235-1247. doi:10.1080/0740817x. 2013.770187
[23] Shadman, A., Zou, C., Mahlooji, H., & Yeh, A. B. (2014). A change point method for Phase II
monitoring of generalized linear profiles. Communications in Statistics - Simulation and
Computation, 46(1), 559-578. doi:10.1080/03610918.2014. 970698
[24] Shadman, A., Mahlooji, H., Yeh, A. B., & Zou, C. (2015). A change point method for monitoring
generalized linear profiles in phase I. Quality and Reliability Engineering International 31 (8),
1367-1381. https://doi.org/10.1002/qre.1671
[25] Shiau, J.-J. H., & Sun, J.-H. (2009). A new strategy for Phase I analysis in SPC. Quality and
Reliability Engineering International, 26(5), 475-486. doi:10.1002/qre.1075
[26] Soleimani Paria, Narvand Ali, Raissi Sadigh, (2013), Online Monitoring of Auto-correlated
Linear Profiles via Mixed Model, International Journal of Manufacturing Technology and
Management, 27(4/5/6), 238-250.
[27] Vargas, N. J. A. (2003). Robust Estimation in Multivariate Control Charts for Individual
Observations. Journal of Quality Technology, 35(4), 367–376. doi:10.1080/00224065.2003.
11980234.
[28] Walker, E., & Wright, S. P. (2018). Comparing Curves Using Additive Models. Journal of
Quality Technology, 34(1), 118-129. doi:10.1080/00224065.2002.11980134
[29] Williams JD, Woodall WH, Birch, JB, & Sullivan JH (2006). Distribution of Hotelling’s T2
Statistic Based on the Successive Differences Estimator. Journal of Quality Technology 2006,
38(3), 217–229. doi:10.1080/00224065. 2006.11918611.
[30] YEH, A. B. (2009). profile monitoring for a binary response. IIE Transactions 931–941.
doi:10.1080/0740817090273540