• فهرس المقالات fluoride

      • حرية الوصول المقاله

        1 - Theoretical and experimental investigation of the magnetic properties of polyvinylidene fluoride and magnetite nanoparticles-based nanocomposites
        M. A. Ramazanov A. M. Maharramov R. A. Ali-zada H. A. Shirinova F. V. Hajiyeva
        AbstractIn the present study, the effect of size distribution of magnetite nanoparticles in a PVDF matrix on the magnetic properties of PVDF + Fe3O4 nanocomposites was experimentally and theoretically investigated. The size distribution of nanoparticles in polymer matri أکثر
        AbstractIn the present study, the effect of size distribution of magnetite nanoparticles in a PVDF matrix on the magnetic properties of PVDF + Fe3O4 nanocomposites was experimentally and theoretically investigated. The size distribution of nanoparticles in polymer matrix and morphology of the nanocomposites were studied by the means of scanning electron microscopy and atomic force microscopy. It was found that when the Fe3O4 nanoparticles are introduced into the polymer matrix, their coagulation takes place. The increase in the size of the particles depends on their concentration in the polymer matrix, the type of polymer (polar, non-polar, its viscosity, etc.), reaction temperatures, etc. In addition, when Fe3O4 nanoparticles are introduced into the polymer network, the oxidation of the surface layer of particles occurs and the magnetic size decreases. Consequently, the reduced magnetic properties may also be observed. The hysteresis loops have been recorded in small magnetic field range. It was found that the magnetic hysteresis parameters depend on the size and concentration of Fe3O4 nanoparticles. Theoretical calculations were compared with experimental results obtained from M(H) measurements. The reasons of differences between theoretical and experimental results have been explained. تفاصيل المقالة
      • حرية الوصول المقاله

        2 - سنتز نانو ذرات مغناطیسی مگنتایت عاملدار شده با متالوپوفیرین نئوبیرم V برای حذف انتخابی یون فلوئورید از محیط های آبی
        طاهره پورصابری مصطفی حسنی سعدی کامران ترکستانی
        وجود مقادیر زیاد فلوئورید در منابع آبی اثری زیان بار بر سلامتی انسان دارد. یک نانوجاذب مغناطیسی جدید از طریق اصلاح نانوذرات Fe3O4 توسط 3-آمینو پروپیل تری اتوکسی سیلان (APTES) و متالوپورفیرین نئوبیوم (V) برای حذف یون های فلوئورید از محلول های آبی تهیه شد. عاملدار کردن Fe أکثر
        وجود مقادیر زیاد فلوئورید در منابع آبی اثری زیان بار بر سلامتی انسان دارد. یک نانوجاذب مغناطیسی جدید از طریق اصلاح نانوذرات Fe3O4 توسط 3-آمینو پروپیل تری اتوکسی سیلان (APTES) و متالوپورفیرین نئوبیوم (V) برای حذف یون های فلوئورید از محلول های آبی تهیه شد. عاملدار کردن Fe3O4 بطریق شیمیائی و از طریق برهمکنش بین گروه های کربوکسیلیک متالوپورفیرین نئوبیوم (V) و گروه های آمین APTES نشانده شده بر سطح مگنتایت انجام شد. خصوصیات نانوجاذب حاصله توسط روش های پراش اشعه X (XRD)، میکروسکوپ الکترونی روبشی (SEM) و طیف سنجی مادون قرمز تبدیل فوریه (FTIR) بررسی شد. عملکرد نانوذرات مغناطیسی اصلاح شده در حذف یون های فلوئورید برحسب pH، زمان تماس، میزان جاذب و اثر آنیون های موجود در محلول آبی انجام شد. . تحت شرایط بهینه (pH :5/5، زمان تماس:30 دقیقه و میزان جاذب:100 میلی گرم) بازده فلوئورید زدائی %0/94بدست آمد. بازیابی فلوئورید جذب شده توسط NaOH امکان پذیر است و امکان استفاده ی مجدد از این نانوجاذب برای چهار دوره ی متوالی وجود دارد. تفاصيل المقالة
      • حرية الوصول المقاله

        3 - اندازه گیری غلظت یون فلوراید در انواع برند تجاری چای های سیاه و دم کرده آن ها
        علیرضا محمدی حسن پرویزی مساعد
        زمینه و هدف: فلوراید یکی از شناخته شده ترین و مفیدترین مواد در مهار پوسیدگی دندان و استخوان می باشد، ولی مصرف مقادیر بالای آن می تواند باعث بروز بیماری فلوئوروزیس دندانی و استخوانی شود. از آنجایی که چای و آب آشامیدنی به عنوان یکی از مواد دارای فلوراید می باشد، بنابراین أکثر
        زمینه و هدف: فلوراید یکی از شناخته شده ترین و مفیدترین مواد در مهار پوسیدگی دندان و استخوان می باشد، ولی مصرف مقادیر بالای آن می تواند باعث بروز بیماری فلوئوروزیس دندانی و استخوانی شود. از آنجایی که چای و آب آشامیدنی به عنوان یکی از مواد دارای فلوراید می باشد، بنابراین بررسی مطالعه حاضر با هدف سنجش غلظت فلوراید در آب شرب و چای مصرفی شهر تهران در سال 1392 صورت گرفت. روش بررسی: در این پژوهش توصیفی- تحلیلی، 25 نوع برند تجاری چای ایرانی و خارجی موجود در بازار شهر تهران و 30 نمونه آب شرب مصرفی شهر تهران در 4 تکرار مورد بررسی قرار گرفتند. مقدار فلوراید موجود در نمونه های چای خشک و در دم کرده چای در مدت زمان های 3، 5 و 10 دقیقه و نمونه های آب بعد از هضم اسیدی توسط دستگاه الکترود انتخابی یون فلوراید اندازه گیری شدند. اطلاعات پس از جمع آوری با استفاده از نرم افزار SPSS ورژن 18 تجزیه و تحلیل گردید. یافته‌ها: نتایج به دست آمده نشان داد که مقدار فلوراید در انواع برند چای خشک بین 2/22-8/303 میلی گرم بر کیلوگرم، در محلول چای بین 2/0- 37/2 میلی گرم بر لیتر و در آب شرب مصرفی بین 012/0-95/0 میلی گرم بر لیتر قرار دارد. هم چنین نتایج نشان داد که با افزایش مدت زمان دم کردن، میزان فلوراید آزاد شده در چای افزایش خواهد یافت به طوری که در مدت زمان های 3، 5 و 10 دقیقه به ترتیب متوسط درصد آزادسازی یون فلوراید در محلول چای 88/31% ، 34/53 % و 08/78 % بود. بحث و نتیجه‌گیری: در انتها مشخص شد که مصرف روزانه چای های بررسی شده به اندازه 5 فنجان توسط کودکان و بزرگسالان هیچگونه مشکلاتی را برای سلامتی آن ها ایجاد نخواهد کرد. اما بایستی غیر از مصرف چای به سایر منابع ورود یون فلوراید به بدن نظیر آب آشامیدنی و غیره نیز توجه داشت، تا از بروز بیماری های استخوانی و دندانی جلوگیری کرد. تفاصيل المقالة
      • حرية الوصول المقاله

        4 - انتخاب بهترین مدل درون یابی قطعی و زمین آماری جهت بررسی تغییرات مکانی فلوراید در آبخوان یزد با استفاده از سیستم اطلاعات جغرافیایی
        سید علی المدرسی علیرضا مقدم رویا پیروی رضا علی فلاح زاده هادی اسلامی محمود تقوی رسول خسروی
        چکیده زمینه و هدف: سازمان جهانی بهداشت برای استفاده از اثرات مفید( پیشگیری از پوسیدگی دندان) و جلوگیری از انواع اثرات منفی مانند فلورزیس دندانی و اسکلتی، پیامدهای بارداری و فشار خون؛ میزان فلوراید آب آشامیدنی را به عنوان رهنمود 2/1-8/0 میلی گرم بر لیتر بیان می کند. هدف أکثر
        چکیده زمینه و هدف: سازمان جهانی بهداشت برای استفاده از اثرات مفید( پیشگیری از پوسیدگی دندان) و جلوگیری از انواع اثرات منفی مانند فلورزیس دندانی و اسکلتی، پیامدهای بارداری و فشار خون؛ میزان فلوراید آب آشامیدنی را به عنوان رهنمود 2/1-8/0 میلی گرم بر لیتر بیان می کند. هدف از این مطالعه تعیین بهترین مدل درون یابی قطعی و زمین آماری جهت بررسی تغییرات مکانی فلوراید در آبخوان دشت یزد با استفاده از سیستم اطلاعات جغرافیایی بود. روش بررسی: در این مطالعه توصیفی- مقطعی از تعداد 24 حلقه چاه نمونه‌برداری و غلظت فلوراید تعیین شد. به منظور درون یابی پارامتر فلوراید از روش‌های قطعی و زمین آماری در نرم‌افزار GIS استفاده شد. بر مبنای معیارهای ارزیابی خطا بهترین روش درون یابی انتخاب و نقشه تغییرات مکانی فلوراید بر اساس آن ترسیم گردید. یافته ها: میانگین غلظت فلوراید در نمونه ها برابر با 2/0 ± 6/0 میلی گرم بر لیتر بود. حداقل و حداکثر غلظت فلوراید به ترتیب برابر با 3/0 و 5/1 میلی گرم بر لیتر بود. با توجه به معیارهای ارزیابی خطا بهترین مدل برای پهنه‌بندی فلوراید روش چندجمله ای محلی انتخاب شد. بحث و نتیجه گیری: با توجه به نتایج به دست آمده لازم است سازمان های مسوول اقدامات لازم را برای پیشگیری ازبروز آثار سو ناشی از کمبود یا مازاد فلوئور بر سلامت مصرف کنندگان را به عمل آورند. تفاصيل المقالة
      • حرية الوصول المقاله

        5 - تغییرات پارامترهای کیفی آب زیرزمینی در محدوده شهرستان ملایر با تاکید بر تاثیر کاربری کشاورزی بر کیفیت آب
        محمد ساکی زاده
        هدف مطالعه کنونی بررسی کیفیت آب زیرزمینی در محدوده شهرستان ملایر، استان همدان، براساس اطلاعات پایش شده در یک دوره زمانی چهار ساله و با توجه به شاخص کیفیت آب با تاکید برتاثیر کاربری کشاورزی برکیفیت آب بوده است. داده های پایش شده در ارتباط با 14 پارامتر کیفیت آب مربوط به أکثر
        هدف مطالعه کنونی بررسی کیفیت آب زیرزمینی در محدوده شهرستان ملایر، استان همدان، براساس اطلاعات پایش شده در یک دوره زمانی چهار ساله و با توجه به شاخص کیفیت آب با تاکید برتاثیر کاربری کشاورزی برکیفیت آب بوده است. داده های پایش شده در ارتباط با 14 پارامتر کیفیت آب مربوط به 26 چاه در طی سال های 1392-1391 و 19 چاه طی سال های 1390-1389 بدست آمدند. میزان باقی مانده کلر در 50 درصد از ایستگاه ها در حد صفر بود. علاوه براین میزان فلوراید در 14 ایستگاه پایین تر از حد آستانه 5/0 میلی گرم در لیتر قرار داشت وبرای 7/80 درصد از ایستگاه ها میزان نیترات بالاتر از 13 میلی گرم در لیتر بود. علی رغم اینکه تفاوت معنی داری بین غلظت برخی از پارامترها در بین این دودوره زمانی بدست آمده بود اما این تفاوت آن چنان چشمگیر نبود. براساس نتایج شاخص کیفیت آب 9/76 درصد از ایستگاه ها در حدآلودگی ناچیز تا متوسط قرار داشتند. درکل، مقادیر نیترات در 21 چاه (7/80درصد) بالاتر از حد استاندارد آلودگی ناشی از منابع انسان انگیخته(13 میلی گرم در لیتر) و در دو چاه بالاتر از استاندارد سازمان بهداشت جهانی جهت مصارف شرب (40 میلی گرم در لیتر) بود. روند تغییرات ناحیه ای نیترات با استفاده از روش درون یابی از سمت شمال غرب به سمت جنوب شرق افزایش نشان می داد. علی رغم این که با توجه به نتایج شاخص کیفیت آب، کیفیت کلی آب دچار زوال نشده است اما همچنان ریسک بهداشتی مصرف به ویژه در زمینه نیترات برای مردم محلی وجود دارد. تفاصيل المقالة
      • حرية الوصول المقاله

        6 - Microwave Assisted Multi-component Synthesis of 4Hchromene Derivatives by Nano-coconut Shell-BF3 as a New Heterogeneous Catalyst
        Hamid Reza Molaei Bahareh Sadeghi
        Microwave assisted reactions have gained considerable attention, due to versatility and reduction ofsolvent and reaction time. The reaction of a nano-coconut shell and boron tri-fluoride in diethylether solvent resulted in preparation of nano-coconut shell-BF3 as a cata أکثر
        Microwave assisted reactions have gained considerable attention, due to versatility and reduction ofsolvent and reaction time. The reaction of a nano-coconut shell and boron tri-fluoride in diethylether solvent resulted in preparation of nano-coconut shell-BF3 as a catalyst. The nano-coconutshell-BF3 catalyst has been characterized by fourier transform infrared spectroscopy (FT-IR), fieldemission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM).Nano-coconut shell-BF3 has been applied as a new heterogeneous catalyst for synthesis of 4Hchromenederivatives from the simple one-pot reaction between aryl aldehydes, cyclic 1,3-diketoneand, malononitrile under microwave reaction. Cleanliness, simple methodology, short time, andexcellent yields of products are some advantages of this method. تفاصيل المقالة
      • حرية الوصول المقاله

        7 - Effect of silver diamine fluoride and potassium iodide on nano leakage and micro tensile bond strength of composite to demineralized dentin in primary teeth
        Forouzan Vahidi Shahrzad Javadinejad Parvin Mirzakochaki
        Background: Conservative treatment of adhesive dentistry considers demineralized dentin as a bonding substrate, and utilizing silver diamine fluoride (SDF) on demineralized dentin before composite restoration, probably can be beneficial.To evaluate the effect of SDF and أکثر
        Background: Conservative treatment of adhesive dentistry considers demineralized dentin as a bonding substrate, and utilizing silver diamine fluoride (SDF) on demineralized dentin before composite restoration, probably can be beneficial.To evaluate the effect of SDF and potassium iodide (KI) on nano leakage plus the micro tensile bond strength of composite to demineralized dentin in primary teeth.Materials and Methods: In this experimental- laboratory study, seventy-eight teeth in the micro tensile group and ninety teeth in the nano leakage group were divided into two groups with sound and demineralized dentin. Each group of teeth was divided into three separate groups. In the first group, bonding was used without pre-treatment. In the second group, the SDF was used before the bonding agent and SDF and, KI was used in the third group. Two-way ANOVA, Bonferroni's post hoc test, Mann-Whitney test and Fisher's exact test were used for data analysis. (α<0.05)Results: The lowest mean bond strength was in the SDF and KI groups in both sound (10.0 ± 1.9) and demineralized (6.8 ± 2.3) dentin groups. Using KI significantly reduced bond strength (P <0.05). Nano leakage in teeth with sound and demineralized dentin in both SDF and SDF and KI groups was significantly lower than in the control groups (P <0.05).Conclusion: Using SDF does not harm composite bond strength to primary teeth, but using KI after SDF reduces composite bond strength. The use of SDF and KI significantly reduces composite nano leakage. تفاصيل المقالة
      • حرية الوصول المقاله

        8 - Knowledge, attitude, and practice of pediatric dentists about silver diamine fluoride (SDF) in Iran
        Zahra Mostajeran Roya Foroughi Homa Zabihi Moghaddam
        Background: Dental caries is the most common oral and dental disease especially among preschool children. Silver diamine fluoride (SDF) is an inexpensive and topical medication that is used to stop caries in infants who do not have the necessary cooperation for receivin أکثر
        Background: Dental caries is the most common oral and dental disease especially among preschool children. Silver diamine fluoride (SDF) is an inexpensive and topical medication that is used to stop caries in infants who do not have the necessary cooperation for receiving dentistry treatments. The aim of this study was to assess the knowledge, attitude, and practice of Iranian pedodontists about SDF.Materials and methods: This analytical-descriptive study of cross-sectional type was done on 190 dentists who were members of Iranian association of pediatric dentistry. The questionnaire of this study included four sections (demographic information, items related to the knowledge, attitude, and practice), which was provided to the participants online. The data were analyzed by Mann-Whitney, Chi-squared, and Spearman statistical tests.Results: The level of knowledge of pedodontists with regards to SDF was good for 178 (93.7%) of specialists, and no specialist with poor knowledge was found. Among 93 (48.9%) of specialists in this research positive attitude was found with regards to SDF. among 190 pedodontists, use of SDF for treatment of carious lesions of deciduous teeth was observed in 85 (44.7%) of subjects.Conclusion: The level of knowledge and attitude of pediatric dentists about SDF was favorable, and had no relationship with age, gender, working background, and occupational status. An inverse significant relationship was seen between the score of attitude and working background of pedodontists; with increase in their working background, the positive attitude decreased among them. There was a direct relationship between level of knowledge and attitude of pedodontists. Regarding practice, the obtained results were relatively favorable. The practice had a significant relationship with age, gender, and working background. تفاصيل المقالة
      • حرية الوصول المقاله

        9 - ارزیابی ریسک سلامت فلوئور و نیترات در آبخوان لار
        معصومه نیکبخت محسن رضایی عطا شاکری
        کاهش کیفیت آب زیرزمینی در مناطق خشک و نیمه خشک نواحی جنوبی ایران، اغلب از نوع آلودگی های زمین زاد و بشرزاد می باشد. در میان بسیاری از آلاینده های مضر، آلودگی های نیترات و فلوراید گسترش بیشتری دارند. در این تحقیق به منظور بررسی غلظت فلوئور و نیترات و مقایسه نتایج آن با ا أکثر
        کاهش کیفیت آب زیرزمینی در مناطق خشک و نیمه خشک نواحی جنوبی ایران، اغلب از نوع آلودگی های زمین زاد و بشرزاد می باشد. در میان بسیاری از آلاینده های مضر، آلودگی های نیترات و فلوراید گسترش بیشتری دارند. در این تحقیق به منظور بررسی غلظت فلوئور و نیترات و مقایسه نتایج آن با استانداردهای ملی و جهانی، ارزیابی ریسک سلامت در بیمارهای غیر سرطان زایی در آبخوان لار صورت گرفته است. در این پزوهش از 17 حلقه چاه در دو فصل تر (خرداد 93) و فصل خشک (شهریور 93) نمونه برداری گردید. چاه های انتخاب شده عمدتاً برای کشاورزی مورد استفاده قرار می گیرند. مقادیر آنیون های SO4 , NO3Cl, HCO3 وکاتیون های Ca K, Na, Mg با استفاده از روش APHA در آزمایشگاه مورد آنالیز قرار گرفت. همچنین ارزیابی ریسک سلامت انسانها با استفاده از شاخص آژانس حفاظت محیط زیست (EPA) مورد سنجش قرار گرفت.میانگین غلطت فلوئور و نیترات در فصل تر F=2.9 و NO3=19.7 و در فصل خشک F=1.8 و NO3=16.3 میلی گرم بر لیتر بدست آمد. ضریب خطر (HQ) و CRlim (بیشترین حد مجاز آب) برای عناصر فلوئور و نیترات محاسبه شد. نتایج نشان می دهد میزان غلظت اندازه گیری شده برای عناصر نیترات و فلوراید در برخی از نمونه های برداشت شده بیش از حد مجاز تعیین شده توسط سازمان بهداشت جهانی (WHO) برای آب شرب بوده و از این رو استفاده از آب این آبخوان برای مصارف خانگی برای افراد بویژه از نظر مقادیر فلوئور برای کودکان خطرناک گزارش می گردد. تفاصيل المقالة
      • حرية الوصول المقاله

        10 - Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications
        Abouzar Rezaei-Baravati Masoud Kasiri-Asgarani Hamid Reza Bakhsheshi-Rad Mahdi Omidi Ebrahim Karamian
        The effect of hydrofluoric acid (HF) treatment on the corrosion performance of the Mg–Zn–Al–0.5Ca alloy was studied by immersing a specimen in HF solutions for varying lengths of time at room temperature. X-ray diffraction (XRD), scanning electron micr أکثر
        The effect of hydrofluoric acid (HF) treatment on the corrosion performance of the Mg–Zn–Al–0.5Ca alloy was studied by immersing a specimen in HF solutions for varying lengths of time at room temperature. X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to study the evolution of microstructures. In vitro corrosion resistance was assessed using potentiodynamic polarization and a room-temperature immersion test in Kokubo solution. The fluoride-treated Mg–Zn–Al–0.5Ca alloy formed by 24h immersion in HF exhibited a more homogeneous, compact, and thicker (2.1 μm) coating layer compared to the other HF treated specimens in 6, 12 and 18 hours. The corrosion resistance performance of the Mg–Zn–Al–0.5Ca alloy formed by 24h immersion in HF was the best, with a corrosion rate of 2.87 mm/y according to the electrochemical experiment. The mean weight loss of the untreated samples was more considerably higher (up to 2 times) than that of the fluoride-treated alloys, according to in vitro degradation assessments. According to the findings because of its low degradation kinetics and apatite formation ability, the fluoride-treated Mg–Zn–Al–0.5Ca alloy is a promising candidate for biodegradable implants. تفاصيل المقالة
      • حرية الوصول المقاله

        11 - Application of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
        Abbas Rahdar Somayeh Rahdar laili Mohammadi Saiedeh Sistani Shabnam Ahmadi Md. Abu Bin Hasan Susan
        Fluoride at high concentrations in water is detrimental to human health. To find an efficient means of removal of fluoride from aqueous system, we synthesized magnesium oxide (MgO)- based iron-cobalt-manganese (MgO-FCN ) nanocomposites via co-precipitation. Fluoride ads أکثر
        Fluoride at high concentrations in water is detrimental to human health. To find an efficient means of removal of fluoride from aqueous system, we synthesized magnesium oxide (MgO)- based iron-cobalt-manganese (MgO-FCN ) nanocomposites via co-precipitation. Fluoride adsorption process was optimized by standard software. The effect of independent parameters such as pH (3-11), initial dose of nanoparticle (0.02-0.1 g/L), initial concentration of fluoride (10-50 mg/L) and reaction time (30-180 min) were optimized to obtain the best responses of fluoride removal using statistical Central Composite Design (CCD) in the procedure of response surface modeling. The best conditions were optimized as pH=5, initial concentration of nanoparticle =0.05 g/L, initial concentration of fluoride =50 mg/L and the process time of 90 min. Under these conditions, the removal efficiency of the fluoride by MgO-based nanocomposites was achieved as 84.64%. High correlation coefficients for the proposed model was also obtained (adjusted R2=0.9993 and R2=0.9984). The equilibrium data were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The Langmuir model was found to be describing the data best. Kinetic studies showed that the adsorption followed a pseudo-second order reaction. تفاصيل المقالة
      • حرية الوصول المقاله

        12 - Investigation of enamel surface hardness using remineralization of white spot lesions with CPP-ACP, fluoride, and CPP-ACPF
        Farzaneh Shirani Shirin Rostami Parastoo Afghari
        Abstract: The enamel surface hardness determination plays a key role in surface abrasion a resin composite bond strength. The aim of this study was to investigate the enamel surface hardness after remineralization of white spot lesions using casein phosphopeptide amorph أکثر
        Abstract: The enamel surface hardness determination plays a key role in surface abrasion a resin composite bond strength. The aim of this study was to investigate the enamel surface hardness after remineralization of white spot lesions using casein phosphopeptide amorphous calcium phosphate (CPP-ACP), fluoride and casein phosphopeptide amorphous calcium phosphate fluoride (CPP-ACPF). Materials and Methods: A 36 bovine anterior teeth were chosen and after decoronization, the teeth were mounted in acrylic resin and their baseline surface hardness was measured. Samples were then demineralized and their surface hardness was measured. The teeth were then divided into three groups and subjected to surface treatment with CPP-ACP, CPP-ACPF and fluoride mouthwash. The surface hardness was measured and the data were analyzed using SPSS software. Results: Paired t-test showed that surface hardness significantly changed after demineralization (P<0.001) and after treatment with CPP-ACPF (P<0.001) and fluoride (P=0.005), however: the change was not significant after treatment with CPP-ACP (P=0.155). Conclusions: The obtained results indicated that treatment with fluoride and CPP-ACPF may increase the surface hardness of demineralized enamel. تفاصيل المقالة
      • حرية الوصول المقاله

        13 - Application of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
        Somayeh Rahdar Leili Mohammadi Abbas Rahdar Shahin Ahmadi Saeideh Sistani Md. Abu Bin Hasan Susan
        Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was أکثر
        Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent parameters suchas pH ( 3-11), the initial dose (0.02-0.1 g/L), the initial concentration of the fluoride(10-50 mg/L) and reaction time (30-180 min) were optimized to obtain the bestresponse of fluoride removal using the statistical Box-Behnken in responsesurface modeling procedure. Conditions for the pH(5), the initial concentrationof nanoparticle (0.05 g/L), the initial concentration of fluoride (50 mg/L) and theprocess time(90 min) were obtained as Min respectively. Under these conditions,the removal efficiency of the fluoride by MgO capped Fe-Co-Mn nanoparticlesequal to 84.64% were achieved. ANONA high correlation coefficients for theproposed model was also obtained (adjusted –R2=0.9993 and R2=0.9984). Theequilibrium data were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The Langmuir model was found to be describingthe data. Kinetic studies showed that the adsorption followed a pseudo-secondorder reaction. تفاصيل المقالة
      • حرية الوصول المقاله

        14 - یک چارچوب فلزی-آلی زویتریون برای حذف فلوئور از محلول آبی
        مصطفی علی اکبری مهدی برقعی رویا مافی غلامی
        فلوراید اضافی یکی از آلاینده های آب در جهان است که حذف آن از آب با روش های شیمیایی منجر به تولید لجن می شود و روش های دیگر مانند R.O نیز در مصرف برق و دفع فاضلاب مشکل دارند. چارچوب های فلز- آلی یکی از جدیدترین جاذب هایی هستند که در جداسازی آنیون ها استفاده می شوند. در ا أکثر
        فلوراید اضافی یکی از آلاینده های آب در جهان است که حذف آن از آب با روش های شیمیایی منجر به تولید لجن می شود و روش های دیگر مانند R.O نیز در مصرف برق و دفع فاضلاب مشکل دارند. چارچوب های فلز- آلی یکی از جدیدترین جاذب هایی هستند که در جداسازی آنیون ها استفاده می شوند. در این تحقیق از MOF 1 برای حذف فلوراید از محلول آبی استفاده شده است. فاکتورهای مختلفی مانند pH، زمان تماس، مقدار جاذب و دما بررسی شد. بر اساس نتایج، MOF سنتز شده در محیط های اسیدی یون های فلوراید بیشتری را جذب می کند. زمان تماس تا 20 دقیقه تاثیر بسزایی در میزان حذف یون فلوراید دارد و سپس اثر آن به شدت کاهش می یابد. مقدار جاذب مصرفی تا حد اشباع مؤثر است و دمای محیط آب تأثیر معنی داری بر میزان جذب یون فلوراید ندارد. همچنین نتایج مطالعات سینتیکی مؤید سینتیک شبه مرتبه دو واکنش جذب فلوراید در حضور MOF1 است. همچنین در این تحقیق از فلز روی به عنوان یون زویتر به عنوان فلز مرکزی با هدف کاهش اثرات زیست محیطی MOF استفاده شده است. تفاصيل المقالة
      • حرية الوصول المقاله

        15 - تأثیر پرکننده کوارتز به همراه باریم آلومینوسیلیکات حاوی فلوراید بر ویژگی مکانیکی چندسازه‌های دندانی نورپخت برپایه Bis-GMA/UDMA/TEGDMA
        بابک اکبری سحر واحدی مریم جمشیدی فرهود نجفی
        در این پژوهش، چندسازه دندانی با استفاده از رزین های بیس-جی ام آ، یودی ام آ و تی ای جی دی ام آ و پرکننده های کوارتز و باریم آلومینوسیلیکاتی حاوی فلوراید، تهیه شد. پس از مرحله ساخت، نمونه ها با طیف سنجی FTIR برای مطالعه اصلاح سطح پرکننده ها، آزمون UTM برای أکثر
        در این پژوهش، چندسازه دندانی با استفاده از رزین های بیس-جی ام آ، یودی ام آ و تی ای جی دی ام آ و پرکننده های کوارتز و باریم آلومینوسیلیکاتی حاوی فلوراید، تهیه شد. پس از مرحله ساخت، نمونه ها با طیف سنجی FTIR برای مطالعه اصلاح سطح پرکننده ها، آزمون UTM برای تعیین استحکام خمشی و آزمون میکروسختی بررسی شدند. سپس، از سطوح شکست نمونه‌های به دست آمده از آزمون خمش، تصویرهایSEM تهیه شد. نتیجه های آزمون UTM به دست آمده حدود 23 % بالاتر از سطح استاندارد ISO4049 (93MPa) بود و نتیجه های سختی سنجی نیز مقدار 84/4 ویکرز را نشان داد که در گستره قابل قبول برای چندسازه های دندانی قرار دارد. پیک های FTIR مربوط به دو سامانه کوارتز و شیشه باریم سیلیکات موفقیت آمیزبودن فرایند سیلان دار شدن را در این دو سامانه نشان دادند. در مجموع به نظر می رسد که ترکیب تهیه شده در این پژوهش، شرایط موردنیاز برای یک چندسازه دندانی را دارد و مطالعه های بیشتری را می توان بر آن انجام داد. تفاصيل المقالة
      • حرية الوصول المقاله

        16 - Chromic-thermal sensitivity response of the PVDF/PDA/GO composite nanofibers
        علی اکبر مرآتی نجمه موذنی عرفان نوری نژاد
        In this research, the composite nanofibers of polyvinylidene fluoride/polydistylene/graphene oxide (PVDF/PDA/GO) have been produced and their thermal and choromic properties have been investigated.For this purpose, samples of PVDF/PDA/GO were produced. The results of ex أکثر
        In this research, the composite nanofibers of polyvinylidene fluoride/polydistylene/graphene oxide (PVDF/PDA/GO) have been produced and their thermal and choromic properties have been investigated.For this purpose, samples of PVDF/PDA/GO were produced. The results of examining the morphology of the produced nanofibers shows that the diameter of nanofibers is significantly decreased and the uniformity of the nanofibers increased by adding GO to the nanofibers. The decrease in nanofiber diameter causes increase in specific surface area of them. The increase of nanofibers specific surface area helps to improve the sensitivity of them. This was confirmed by reflective spectrophotometric test and their high color response to methanol solvent. Also, by heating the sample, it was observed that the produced samples are sensitive to 60 ° C and therefore, they are thermochromic. Because of choromic-thermal properties of PVDF/PDA/GO composite nanofibers, they can be used as a type of chromic sensors and/or thermal sensors. In PVDF/PDA/GO composite nanofibers, graphene oxide enhances the chromic sensitivity responses of polyvinylidene fluoride/polydiacetylene nanofibers. تفاصيل المقالة
      • حرية الوصول المقاله

        17 - Boron trifluoride etherate; highly efficient catalyst for synthesis of tert-butylamides via modified Ritter reaction in solvent free condition
        Masoud Mokhtary Faranak Najafizadeh
        Highly efficient method for the preparation of N-tert-butyl amides by reaction of nitriles with tertbutylacetateis described using boron trifluoride etherate in solvent free condition. Selective amidation ofbenzonitrile in the presence of acetonitrile was also achieved.
        Highly efficient method for the preparation of N-tert-butyl amides by reaction of nitriles with tertbutylacetateis described using boron trifluoride etherate in solvent free condition. Selective amidation ofbenzonitrile in the presence of acetonitrile was also achieved. تفاصيل المقالة
      • حرية الوصول المقاله

        18 - Evaluation of fluoride concentration at inlet and outlet household water treatment systems and bottled water distributive high consumption Ardabil city, Iran
        Zahra Poorakbar Amir Hosein Mahvi Hadi Sadeghi Mehdi Vosoughi S.Ahmad Mokhtari Abdollah Dargahi
        Fluoride is needed for better health, but it can cause adverse health effects if used at higher levels. There are different sources for the uptake of the fluoride, and drinking water is its primary resource. The aim of this study is the evaluation of fluoride concentrat أکثر
        Fluoride is needed for better health, but it can cause adverse health effects if used at higher levels. There are different sources for the uptake of the fluoride, and drinking water is its primary resource. The aim of this study is the evaluation of fluoride concentration at the inlet and outlet of household water treatment systems and highly consumed bottled water distributed in Ardabil city in 2020. This descriptive cross-sectional study was performed on 60 water samples (30 samples of bottled water from 10 distribution brands of Ardabil city and 30 samples of inlet and outlet of household water treatment system). The concentration of fluoride was measured using the SPADNS standard method and spectrophotometer techniques. The SPSS version 22 software was used for analyzing the data. The concentration of fluoride in all samples was obtained to be in the range of 0 to 0.87 mg.l-1, with an average of 0.35 mg.l-1, which was less than the standard. According to the results, the concentration of fluoride in the studied groups was significantly different (P = 0.001). Moreover, the efficiency of the household water treatment system in the reduction of fluoride was observed to be 67.25%. Although the concentration of fluoride in most samples was lower than standard, further studies on other sources of fluoride, such as vegetables, tea, and so on, are required for accurate comment on fluoride deficiency in drinking water of one area. تفاصيل المقالة