فهرس المقالات Mechanical Strength

• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  1 - Synthesis of Environmentally Friendly Activated Alkali Concrete (Geopolymer) Based on Bentonite
  A Esparham
  Geopolymers can be mentioned as a new class of green cement adhesives. Geopolymers have recently been introduced as a greener alternative to conventional Portland cement (OPC) with the potential to minimize the negative environmental consequences of OPC such as carbon f أکثر

  Geopolymers can be mentioned as a new class of green cement adhesives. Geopolymers have recently been introduced as a greener alternative to conventional Portland cement (OPC) with the potential to minimize the negative environmental consequences of OPC such as carbon footprint and energy consumption. In this experimental study, the effects of different alkaline activating solutions on compressive, tensile, and indirect flexural strength, water absorption, and acid resistance of bentonite-based geopolymer concrete (GPC) were investigated. Also in this study, a new type of alkaline activator was used. In this study, GPC samples made from bentonite were produced and baked at 90 ° C. The results showed that the addition of NaOH to the mixture after 3 minutes of mixing KOH and Na2SiO3 with dry components (1/3 of the total mixing time) increases the compressive, tensile, and flexural strength and we also see that with this new method, water absorption capacity and the amount of weight loss of geopolymer concrete samples are reduced in acidic conditions. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  2 - Investigation of Mechanical Property and Microstructure of Nanocomposite AZ31/SiC Fabricated by Friction Stir Process
  ahmad haghani Sayed Hassan Nourbakhsh Mehdi Jahangiri
  The friction stir process (FSP) is a solid state process, which has been used to insert reinforcing particles into the structure of a material to create a composite with improved properties. Magnesium is a light structural metal that is increasingly used in the aerospac أکثر

  The friction stir process (FSP) is a solid state process, which has been used to insert reinforcing particles into the structure of a material to create a composite with improved properties. Magnesium is a light structural metal that is increasingly used in the aerospace and automobile industries. In this research, SiC nanoparticles were added to AZ31 alloy using FSP in two overlaps of 100% and 50% passes. In 100% pass overlapping, nanoparticles were added in 4, 8 and 16 volume percentages and in 50% pass overlapping only nanoparticles in 4 volume percent were added. The FSP process performed as 4 consecutive passes in both overlaps along with rapid cooling. Microstructure, hardness and tensile strength of created composites were examined. The results suggested that adding reinforcing materials causes reduction in the size of the grains, uniformity of structure and increase in the hardness of material. SiC nanoparticles distributed uniformly through the AZ31 alloy. By increasing volume fraction of reinforcing materials, yield stress of the material increased but ultimate stress and formability properties reduced. In 50% overlapping state, the yield stress in directions, either parallel or perpendicular to the pin direction, increased rather than 100% overlapping state, but the ultimate stress and elongation properties reduced. This reduction was greater in the perpendicular direction relative to the pin direction. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  3 - Different Geometry Design Structures of Tissue Scaffolds for Additive Manufacturing
  amirhossein Ehsani sadegh rahmati Mohammad Nikkhoo Shahram Etemadi Haghighi Mohammad Haghpanahi
  10.30495/admt.2021.1936526.1298
  The design and manufacturing cubic porous scaffolds are a considerable notion in tissue engineering (TE). From Additive manufacturing (AM) perspective, it has attained high appeal in the string of TE during the past decade. In the view of TE, the feasibility of manufact أکثر

  The design and manufacturing cubic porous scaffolds are a considerable notion in tissue engineering (TE). From Additive manufacturing (AM) perspective, it has attained high appeal in the string of TE during the past decade. In the view of TE, the feasibility of manufacturing intricate porous scaffolds with high accuracy contrast to prominent producing methods has caused AM the outstanding option for manufacturing scaffold. From design perspective, porous scaffold structures play a crucial task in TE as scaffold design with an adequate geometries provide a route to required strength and porosity. The target of this paper is achieve of best geometry to become an optimum mechanical strength and porosity of TE scaffolds. Hence, the cubic geometry has been chosen for scaffold and Cube, Cylinder and Hexagonal prism geometries have been selected for pore of structures. In addition, for noticing the porosity effects, pore size has been chosen in three size, and a whole of nine scaffolds have been designed. Designed scaffolds were generated using Fused Deposition Modeling (FDM) 3D Printer and dimensional specifications of scaffolds were evaluated by comparing the designed scaffolds with Scanning Electron Microscope (SEM). The samples were subjected to mechanical compression test and the results were verified with the Finite Element Analysis (FEA). The results showed that firstly, as the porosity increases, the compressive strength and modulus of elasticity obviously decreased in all geometry pore scaffolds. Secondly, as the geometry changes in similar porosity, cubic pore scaffold achieved higher compressive strength and modulus of elasticity than cylinder and hexagonal prime. Experimental and FEM validated results proposed a privileged feasible pore geometry of cubic scaffold to be used in design and manufacturing of TE scaffolds. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  4 - Synthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying
  Roholamin Sedighi Mohammad Rajabi Seyed Mahmood Rabiee
  Thermal stability and the kinetics of the grain growth of nano-crystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying (MA) were investigated. It started with elemental powders, using a variety of analytical techniques including differential scanning calorimet أکثر

  Thermal stability and the kinetics of the grain growth of nano-crystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying (MA) were investigated. It started with elemental powders, using a variety of analytical techniques including differential scanning calorimetry (DSC), X-ray diffraction method (XRD), and scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDS). The results showed that MA-processed alloy was composed of an Mg-based supersaturated solid solution with small amounts of Al and MgAl2O4. Grain growth and Mg2Si precipitation occurred upon annealing of the MA-processed Mg-based alloy. Nevertheless, grain growth in the MA-processed alloy was limited and α-Mg grains with sizes in the range of 70 nm were still present after exposure to 450 °C. The grain growth behavior of alloy can be described by the parabolic kinetic equation of grain growth. Higher strength values obtained after hot consolidation can be due to refined microstructure and the formation of Mg2Si intermetallic phase. تفاصيل المقالة