• فهرس المقالات Basalt

      • حرية الوصول المقاله

        1 - مدیاهای جدید در فیلترهای چند لایه تصفیه آب و مقایسه کارایی آنها با مدیاهای متداول (ماسه/آنتراسیت)
        سید مصطفی خضری فریما روشن آبکنار
        زمینه و هدف: به منظور دستیابی به آب شرب با کیفیت بالا، استفاده از فن آوری ها و دانش روز دنیا از جمله استفاده از فیلترهای دو لایه ای در تصفیه خانه های آب امری ضروری است. امروزه استفاده از مواد بازیافتی در دنیا رایج گردیده و از آنها در صنایع مختلف استفاده می شود، که همچنی أکثر
        زمینه و هدف: به منظور دستیابی به آب شرب با کیفیت بالا، استفاده از فن آوری ها و دانش روز دنیا از جمله استفاده از فیلترهای دو لایه ای در تصفیه خانه های آب امری ضروری است. امروزه استفاده از مواد بازیافتی در دنیا رایج گردیده و از آنها در صنایع مختلف استفاده می شود، که همچنین می توان به استفاده از این مواد در فرایند فیلتراسیون اشاره کرد. تحقیقات قبلی انجام شده در خصوص استفاده و جایگزینی از مواد دوریز در بسترهای چند لایه شامل استفاده از خرده شیشه و پوسته روغنی سوخته خرما می باشد. در این بررسی به منظور حفظ و پاکیزگی محیط زیست و با هدف پیدا کردن ترکیبات جدیدی برای فیلترهای چند لایه و مقایسه آنها با فیلترهای متداول چند لایه از مصالح ساختمانی دور ریخته شده نظیر خرده سنگهای گرانیت و بازالت استفاده شده است. روش بررسی: این مطالعه نتایج حاصل از یک تحقیق تجربی در مقیاس پایلوت می باشد و کلیه آزمایشات براساس روش استاندارد AWWA B100 انجام شد و پارامترهای مختلفی، از جمله کدورت، زمان کارکرد و ارتفاع در این تحقیق مورد بررسی قرار گرفتند. یافته ها: بستر دو لایه (ماسه/آنتراسیت) به عنوان مبنای مقایسه و بسترهای دو لایه (گرانیت/آنتراسیت) و (بازالت/آنتراسیت) نسبت به آن مقایسه گردید. متوسط راندمان حذف کدورت به ترتیب برای بسترهای دو لایه (ماسه /آنتراسیت) 4/19%، (گرانیت/آنتراسیت) 1/29%، (بازالت/آنتراسیت) 9/29% و در بین ارتفاعات مورد آزمایش cm 58 و 55، 07 بهترین ارتفاع برای بسترهای دو لایه مجموع ارتفاع cm58 می باشد. و بیشترین زمان کارکرد در بین این سه بستر دو لایه متعلق به بستر دو لایه (گرانیت/ آنتراسیت) و برابر با 63 ساعت است. بحث و نتیجه گیری: بسترهای دولایه (بازالت/آنتراسیت) شباهت بسیاری به بسترهای دولایه (ماسه/آنتراسیت) از لحاظ زمان کارکرد، ارتفاع و راندمان حذف کدورت دارند، همچنین می توان به شباهتی که بازالت به ماسه در خصوص آزمایشهای سختی و حلالیت در اسید دارد اشاره کرد. بنابراین می توان از مصالح دور ریز ساختمانی گرانیت و بازالت بدلیل کارایی بالایشان در حذف کدورت و زمان کارکرد طولانی در بسترهای دو لایه استفاده کرد و حتی آنها را جایگزین مواد متداول مانند ماسه در بسترها نمود. تفاصيل المقالة
      • حرية الوصول المقاله

        2 - Pliocene volcanic activity of the Harrat Ash-Sham, South of Syria: geochemistry and petrogenesis
        Safwan Dawod Ali Al-Mishwat Abdulkarim Al Abdalla
        The Cenozoic volcanic activity of the Harrat Ash Sham volcanic field in south of Syria is a part of the extensive magmatism that took place in the auxiliary extension faults along the Dead Sea Fault Zone from upper Eocene to Holocene. Pliocene volcanic rocks form an imp أکثر
        The Cenozoic volcanic activity of the Harrat Ash Sham volcanic field in south of Syria is a part of the extensive magmatism that took place in the auxiliary extension faults along the Dead Sea Fault Zone from upper Eocene to Holocene. Pliocene volcanic rocks form an important part of igneous succession in Syrian Part of Harrat as Sham. These rocks vary from basalts flows to scoria. Pliocene basalts are divided into three primary petrographic groups: olivine basalt, olivine-pyroxene basalt and basanite. The three petro-types are alkaline and have similar compositional ranges of major and trace elements. Variations in the contents of major and minor elements in the Pliocene basaltic rocks are very slight. Such homogeneity in the chemical composition indicates to the operation of petrological processes that reinforced each other during the genesis of these rocks. The geochemical characteristics of the Pliocene basalt rocks reflect crystallization from primitive basic magmas that have experienced limited crystal fractionation process subsequent to their derivation by partial melting of the upper mantle. تفاصيل المقالة
      • حرية الوصول المقاله

        3 - Distribution and geochemical variations among paleogene volcanic rocks from the north-central Lut block, eastern Iran
        Saeed Saadat Charles Stern
        The Lut block in eastern Iran is a micro-continental block within the convergent orogen between the Arabian, Eurasian and Indian plates. Large areas of the north-central, eastern, and western Lut block are covered by volcanic rocks of Paleogene, Neogene and Quaternary a أکثر
        The Lut block in eastern Iran is a micro-continental block within the convergent orogen between the Arabian, Eurasian and Indian plates. Large areas of the north-central, eastern, and western Lut block are covered by volcanic rocks of Paleogene, Neogene and Quaternary age.  Peak volcanic activity took place in the north-central part of the Lut block during the Eocene, and then dramatically decreased, becoming more restricted to the eastern and western margins of the block during the late Miocene and Quaternary. There is also significant variation in chemistry between the Paleogene igneous rocks from the north-central part compared to the Neogene and Quaternary volcanic rocks from the western and eastern margins of the Lut block. The Neogene and Quaternary olivine basalts, which were erupted along both margins of the Lut block, are similar in trace element chemistry to the average composition of oceanic island basalt. In contrast, the Paleogene volcanic units of the north-central Lut block, which include basalts through rhyolites, follow both calc-alkaline and alkaline trends. Low TiO2 and high Ba/Nb and La/Nb ratios for both Paleogene basalts and andesitic samples from the north-central Lut block suggest affinities, at least for some of these samples, with convergent plate boundary arc magmas. LILE/HFSE ratios, interpreted as an indication of subduction signature, increase to the south-southwest of the central Lut block, where Neotethys oceanic crust was subducted beneath Iran in a northeastern direction from approximately Late Triassic to Late Oligocene time. We suggest that components derived from low angle subduction of this crust during the Mesozoic and early Tertiary were stored in the mantle lithosphere below the north-central Lut block until the Paleogene, when changing subduction geometry, associated with the collision of Arabia with Iran and the closing of Neotethys, caused hot asthenosphere to well up under the Lut block. This created the Eocene peak in volcanic activity, generating basalts from asthenospheric mixed with lithospheric melts, with both alkaline and calc-alkaline affinities. After this volcanism waned, becoming restricted during the Neogene to OIB-type alkaline basalts erupted through deep lithospheric structures along both the western and eastern margins of the Lut block. تفاصيل المقالة
      • حرية الوصول المقاله

        4 - Petrology and Presentation: A Seven-Stage Model forGeodynamic Evolution of the Northeast Region of Birjand,East of Northern Lut, Eastern Iran
        Esmail Elahpour Soraya Heuss-Aßbichler
        The northeast region of Birjand is located in Lut structural and geological province. In this area we can distinguish two separate volcanic rock groups: intermediate to acidic volcanic rocks, including dacite, andesite, rhyolite and trachyandesite; and basic rocks, incl أکثر
        The northeast region of Birjand is located in Lut structural and geological province. In this area we can distinguish two separate volcanic rock groups: intermediate to acidic volcanic rocks, including dacite, andesite, rhyolite and trachyandesite; and basic rocks, including basaltic andesite, mugearite and basalt. In this region, intermediate to acidic rocks, which belong to the Eocene-Miocene period according to dating results, are the main formation, and we can see the second, younger (evidently Pliocene) volcanic rock group as outcrops with a northwest-southeast trend in the background of the intermediate to acidic volcanic rocks. Geochemical studies show the differences between these two distinctive groups clearly, and reveal that intermediate to acidic rocks belong to active continental margin calc-alkaline rocks. Studies also show the related mantle magma has been influenced by subducted lithospheric slab and metasomatized by crustal materials. The second volcanic rock group belongs to within-plate alkaline rocks. The linear successions and the arrangement of the basic volcanic rocks’ outcrop in a northwest–southeast trend is in relation to the right lateral fault zones that have branched out of the Nehbandan fault system. As a result of the extensional regime development, and the high depth of these faults, alkaline magma could have formed and ascended to the surface. Considering with accepted ideas concerning eastern Iran geodynamic evolution and our new data, we have tried to complete the previous findings and present a seven-stage model for geological evolution of eastern Iran. تفاصيل المقالة
      • حرية الوصول المقاله

        5 - Petrochemical Characteristics of Neogene and Quaternary Alkali Olivine Basalts from the Western Margin of the Lut Block, Eastern Iran
        S. Saadat M. H. Karimpour Ch. Stern
        The Nayband strike-slip fault forms the western margin of the micro-continental Lut block in Eastern Iran. Neogene and Quaternary mafic volcanic rocks collected near Tabas, along the northern part of the fault (NNF; 15 Ma), and further to the south, along the middle par أکثر
        The Nayband strike-slip fault forms the western margin of the micro-continental Lut block in Eastern Iran. Neogene and Quaternary mafic volcanic rocks collected near Tabas, along the northern part of the fault (NNF; 15 Ma), and further to the south, along the middle part of the fault (MNF; 2 Ma), are within-plate sodic-series alkali olivine basalts with high TiO2 and up to >16% normative nepheline. Their high MgO, Ni and Cr contents indicate that they crystallized from relatively primitive magmas. Their low La/Nb and Ba/Nb ratios are similar to oceanic island basalts (OIB) and unlike convergent plate boundary arc basalts (IAB). These alkali olivine basalts show enrichment in LREE relative to HREE and limited variation in Sr, Nd and Pb isotopic values which all plot in the range of OIB. Ce/Pb (>39), Nb/U (44-120) and P2O5/K2O (~0.4) ratios suggest that crustal contamination was not significant for MNF basalts. The data may be interpreted as indicating the participation of upwelling mantle asthenosphere and the deeper continental mantle lithosphere in the generation of these basalts. They formed by generally low, but variable degrees of partial mantle melting, which decreased with time from 15 Ma NNF relative to2 Ma MNF basalts. The small volume of melts that formed the MNF basalts rose to the surface along the deep Nayband strike-slip fault with no interaction with the continental crust. The larger volume of NNF basalts interacted to some degree with the crust and are associated with basaltic andesites and andesites. تفاصيل المقالة
      • حرية الوصول المقاله

        6 - پترولوژی و پتروگرافی سنگهای آتشفشانی کواترنری شمال- شمال شرق ورزقان )آذربایجان شرقی
        پروین حاجی زاده محمد هاشم امامی
        منطقه مورد مطالعه در شمال- شمال شرق شهرستان ورزقان در استان آذربایجان شرقی واقع شده است و از نظر ساختاری، در زونالبرز- آذربایجان قرار دارد. در این منطقه سنگهای آتشفشانی کواترنری بر روی واحدهای پلیوسن گسترش یافتهاند. سنگهای آتشفشانیمورد مطالعه عبارتند از: بازالت، تراکی ب أکثر
        منطقه مورد مطالعه در شمال- شمال شرق شهرستان ورزقان در استان آذربایجان شرقی واقع شده است و از نظر ساختاری، در زونالبرز- آذربایجان قرار دارد. در این منطقه سنگهای آتشفشانی کواترنری بر روی واحدهای پلیوسن گسترش یافتهاند. سنگهای آتشفشانیمورد مطالعه عبارتند از: بازالت، تراکی بازالت، تراکی آندزیت و تراکی آندزیت بازالتی. این سنگها اکثراً دارای بافت پورفیریک با زمینهمیکرولیتی بوده و کانیهای اصلی آنها شامل پیروکسن و پلاژیوکلاز میباشد. بر اساس مطالعات ژئوشیمی، سنگهای آتشفشانی منطقه دارایماهیت آلکالن با گرایش سدیک میباشند و از عناصر کمیاب خاکی سبک ) ،(LREEغنی شدگی و از عناصر کمیاب خاکی سنگین) ،(HREEتهی شدگی نشان میدهند. شواهد پتروگرافی و ژئوشیمیایی دلالت بر دخالت پدیدههای ذوب بخشی گوشته، تبلور بخشی،آلودگی و آناتکسی پوسته قارهای در تشکیل سنگهای آتشفشانی منطقه دارد. طبق نمودارهای محیط تکتونوماگمایی، نمونهها در محدودهبازالتهای درون قارهای قرار میگیرند تفاصيل المقالة
      • حرية الوصول المقاله

        7 - پتروگرافی و ژئو شیمی سنگهای آتشفشانی بازیک کوه قرینه شمال شرق قروه(غرب ایران)
        سید جمال شیخ ذکریایی افشین اشجع اردلان سحر طربی
        آتشفشان قرینه از مناطق آتشفشانی قروه-تکاب در کمربند سنندج سیرجان و در منطقه قزلچه کند می باشد.بر اساس مطالعات پتروگرافی زنوکریست کواتز و پلاژیوکلاز و زنولیتهای گرانیتوییدی در ترکیب این سنگها مشاهده میشوند.فنوکریستها،زنوکریست و زنولیتها در زمینه ریز بلور با بافت پورفیر أکثر
        آتشفشان قرینه از مناطق آتشفشانی قروه-تکاب در کمربند سنندج سیرجان و در منطقه قزلچه کند می باشد.بر اساس مطالعات پتروگرافی زنوکریست کواتز و پلاژیوکلاز و زنولیتهای گرانیتوییدی در ترکیب این سنگها مشاهده میشوند.فنوکریستها،زنوکریست و زنولیتها در زمینه ریز بلور با بافت پورفیریک با خمیره میکرولیتی تا شیشه ای حفره دار دیده می شوند.کلیه سنگها دارای ترکیب بازالت،الیوین بازالت و آندزیت بازالت می باشد.بر اساس مطالعات ژئوشیمیایی سنگهای آلکالن بازیک مورد مطالعه جز سنگهای آلکالن سری شوشونیتی درون صفحه ای طبقه بندی می شوند.آنومالی های مثبت و منفی در الگوهای بهنجار شده عناصر کمیاب ناسازگار نشان از آلایش با مواد پوسته ای و پدیده هضم دارد.بررسی نسبت عناصر Litofil Ion Larg REE)Rare Earth Elements(ٚ‌HFSE‌)High Field Small Elements(،LILE‌)Elementsحکایت از یک منشا غنی شبیه به بازالت های اقیانوسیOIB)Ocean Island Basalt( داشته و نقش پوسته های میانی ،پایینی را در آلایش ماگمایی،موثرتر از نقش لیتوسفر زیر قاره ای می داند. تفاصيل المقالة
      • حرية الوصول المقاله

        8 - بررسی ویژگی های ژئوشیمیایی و جایگاه تکتونوماگمایی سنگ های آتشفشانی با ترکیب حدواسط- شمال ساوه
        سپیده آقاویردی زاد زاغه شیوا انصاری ناصر عبادتی
        منطقه مورد مطالعه بخشی از نوار ماگمایی آتشفشانی ارومیه – دختر است، رخنمون های اصلی این نوار ماگمایی با روند شمال غرب – جنوب شرق را واحدهای آتشفشانی ائوسن تشکیل می دهند. در نقشه زمین شناسی واحد مورد مطالعه دارای ترکیب بازالت، آندزیت بازالت، داسیت، ایگنمبریت و أکثر
        منطقه مورد مطالعه بخشی از نوار ماگمایی آتشفشانی ارومیه – دختر است، رخنمون های اصلی این نوار ماگمایی با روند شمال غرب – جنوب شرق را واحدهای آتشفشانی ائوسن تشکیل می دهند. در نقشه زمین شناسی واحد مورد مطالعه دارای ترکیب بازالت، آندزیت بازالت، داسیت، ایگنمبریت و توف می باشد که به طور متناوب در سرتاسر پهنه ارومیه – دختر تکرار شده است و توده های نفوذی بیشتر ترکیب گرانیت – گرانودیوریت تا تونالیت دارند. سنگ های آتشفشانی منطقه به سن ائوسن شامل آندزیت، تراکی آندزیت، آندزیت بازالت، آلکالی بازالت، تراکی داسیت و بازالت همراه هستند که دارای بافت های بافت پورفیری شیشه ای، هیالومیکرولیتی پورفیری، پورفیری، پورفیری در زمینه میکرولیتی، تراکیتی، پورفیریک میکرولیت و گاهی پوئی کیلیتیک هستند. نمونه های مورد مطالعه اغلب سرشت کالکو آلکالن ، کالکوآلکالن پتاسیم بالا و شوشونیتی و در برخی نمونه ها سرشت توله ایتی دارند. سیر نزولی بعضی از اکسیدهای عناصر اصلی مانند CaO و TiO2 و MgO ، و روند افزایشی بعضی از اکسید ها مانند K2O از سوی سنگ های بازیک به سوی سنگ های میانه – اسیدی با روند تفریق سازگار است. برخی از پراکندگی هایی که در این نمودارها دیده می‌شود را می‌توان به فرآیندهایی مانند دگرسانی یا آلایش و آلودگی ماگمایی سازنده سنگ های آتشفشانی منطقه با مواد پوسته ای نسبت داد. تفاصيل المقالة
      • حرية الوصول المقاله

        9 - Effect of Basalt and Polypropylene Fibers on Unconfined Compressive Strength of Cement-Stabilized clay, an Experimental Approach
        Seyed Hadi Sahlabadi Meysam Bayat Mohsen Mousivand Mohsen Saadat
        So far, many studies have been done on the performance of conventional chemical stabilizers such as cement, lime, fly ash or other chemical additives. However, very limited researches were conducted on the mechanical behavior of cement-stabilized soil with fiber inclusi أکثر
        So far, many studies have been done on the performance of conventional chemical stabilizers such as cement, lime, fly ash or other chemical additives. However, very limited researches were conducted on the mechanical behavior of cement-stabilized soil with fiber inclusion. Fiber-reinforcement of a stabilized soil offers new opportunities to improve ductility and strength characteristics of weak soils. The main objective of this research is considering the effects of curing time, initial moisture content, polypropylene fiber (PPF) or basalt fiber (BF) with or without addition of cement on the Unconfined Compressive Strength (UCS) of the clay soil. Different ratios of PPF or BF and/or cement were added to the soil to identify their influences on the UCS. The study finds that adding cement, PPF or BF to soil causes a remarkable increase in the strength. The strength of the PPF-reinforced specimens was observed significantly more than that of BF-reinforced ones. The strength of specimens increases gradually as the initial moisture content decreases and the cement content or curing time increases. However, the axial strain at failure for cement-stabilized specimens decreased with increasing cement content or curing time. Furthermore, it is concluded that the increase in UCS of combined PPF or BF and cement inclusions is more than the increase caused by each of them, individually. تفاصيل المقالة
      • حرية الوصول المقاله

        10 - Investigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
        R. DavoudianDehkordi A. A Nourbakhsh H MonajatiZadeha
        Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in dif أکثر
        Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this research, influence of different parameters such as firing temperature and weight fraction of continuous basalt fiber on strength of lithium-based geopolmer composites reinforced by basalt fibers was studied. Firstly, raw materials for geopolymer preparation were calcined. Then, geopolymer matrix with specific molar ratio was made with three different weight percent of basalt fiber. The Molds were put in an oven and after that the composites were taken out of the molds. Then the samples were cured at three different temperatures. After heat treatment, C-MOR of composites was tested and flexural strength and fracture energy for different samples were calculated. The results showed that basalt fiber composites at 200˚C had high strength, but by increasing temperature the strength decreased. Also, Fracture energy of composites at 200˚C was higher than other temperatures. تفاصيل المقالة
      • حرية الوصول المقاله

        11 - Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
        رضا اسلامی فارسانی سید محمدرضا خلیلی وحید دقیقی رضا فاضلی
        The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume perc أکثر
        The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each other. No creep rupture failures were observed in short-term (less than 10000 seconds) high temperature (T= 150 and 200 °C) tensile creep tests at the loads up to 15% of the ultimate tensile strength (UTS) of the specimen. It was also found that the creep resistance of basalt fiber reinforced epoxy (BFRE) was higher than that of glass fiber reinforced epoxy (GFRE) and the materials are generally behaved as non-linear for all stresses and temperatures. Adding MGP decreased the initial strain of BFRE, but had no significant effect on the overall life time of BFRE. تفاصيل المقالة