A

  • Aghajani Derazkola.Hamed Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [ Vol.7, Issue 4 - Autumn Year 2018]
  • Amini.Saeid The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [ Vol.7, Issue 2 - Spring Year 2018]

F

  • Fallah.M. M. Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]

H

  • Habibi.Sara Feature Selection in Big Data by Using the enhancement of Mahalanobis–Taguchi System; Case Study, Identifiying Bad Credit clients of a Private Bank of Islamic Republic of Iran [ Vol.7, Issue 3 - Summer Year 2018]
  • Habibi.Sara Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [ Vol.7, Issue 2 - Spring Year 2018]
  • Haghighi.Ahmad Reza Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [ Vol.7, Issue 2 - Spring Year 2018]
  • Hassanzadeh Nemati.Nahid The Effect of the Third Element on Corrosion Behavior and Phase Structure of Fe35Mn Alloy Fabricated by Spark Plasma Sintering (SPS) [ Vol.7, Issue 4 - Autumn Year 2018]

J

  • Jabbari.Keyhan The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys [ Vol.7, Issue 1 - Winter Year 2018]
  • Jafari Fesharaki.Javad A Heuristic Approach for Optimization of Gearbox Dimension [ Vol.7, Issue 2 - Spring Year 2018]

K

  • karevan.ali Analyze the Effect of the Maintenance Activities on the Internet Sustainability by Using 2k Factorial Experiment Design [ Vol.7, Issue 2 - Spring Year 2018]
  • Karimkhani.Behzad Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [ Vol.7, Issue 4 - Autumn Year 2018]
  • Kazazi.Mahdi Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]
  • Kebreyaeezade.Asghar Integer-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints [ Vol.7, Issue 3 - Summer Year 2018]
  • Kheirkhahan.Payam Robust Fractional-order Control of Flexible-Joint Electrically Driven Robots [ Vol.7, Issue 1 - Winter Year 2018]
  • Kheirkhahan.Payam An Alternative Stability Proof for Direct Adaptive Function Approximation Techniques Based Control of Robot Manipulators [ Vol.7, Issue 2 - Spring Year 2018]
  • Kolahdooz.Amin Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells [ Vol.7, Issue 3 - Summer Year 2018]

L

  • Latifi Rostami.Seyyed Ali Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells [ Vol.7, Issue 3 - Summer Year 2018]
  • Lotfi.Mohammad The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [ Vol.7, Issue 2 - Spring Year 2018]

M

  • Montazerolghaem.Hamid Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method [ Vol.7, Issue 1 - Winter Year 2018]
  • Moradi.Alireza A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [ Vol.7, Issue 3 - Summer Year 2018]
  • Moradi.Mahmoud Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]
  • Morady Gohareh.Mehdy System Engineering Implementation Process for Super-Systems [ Vol.7, Issue 1 - Winter Year 2018]
  • Mousavi.Sayed Ali Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [ Vol.7, Issue 4 - Autumn Year 2018]

N

  • Nikbakht.Mehrdad Identification and Clustering Outsourcing Risks of Aviation Part- Manufacturing Projects in Aviation Industries Organization Using Kmeans Method [ Vol.7, Issue 4 - Autumn Year 2018]
  • Nikbakht.Mehrdad Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [ Vol.7, Issue 1 - Winter Year 2018]
  • Niknam.Seyed Ali The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys [ Vol.7, Issue 1 - Winter Year 2018]

O

  • ordikhani.shahin Feature Selection in Big Data by Using the enhancement of Mahalanobis–Taguchi System; Case Study, Identifiying Bad Credit clients of a Private Bank of Islamic Republic of Iran [ Vol.7, Issue 3 - Summer Year 2018]
  • Ordikhani.Shahin Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [ Vol.7, Issue 2 - Spring Year 2018]

R

  • Rahimzadeh.Ayub A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [ Vol.7, Issue 3 - Summer Year 2018]

S

  • Sajjady.Sayed Ali The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [ Vol.7, Issue 2 - Spring Year 2018]
  • shahhosseini.masoud Impedance Control of Robots Using Voltage Control Strategy Revisited [ Vol.7, Issue 1 - Winter Year 2018]
  • shahhosseini.masoud Task-space Control of Robots Using an Adaptive Taylor Series Uncertainty Estimator Revisited [ Vol.7, Issue 4 - Autumn Year 2018]
  • Shekarchizadeh.Ahmadreza Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [ Vol.7, Issue 1 - Winter Year 2018]

T

  • Taghizadeh.Behnam The Effect of Al2O3-MWCNT Hybrid Nanofluid on Surface Quality in Grinding of Inconel 600 [ Vol.7, Issue 3 - Summer Year 2018]
  • tavakoli.morteza Task-space Control of Electrically Driven Robots [ Vol.7, Issue 4 - Autumn Year 2018]

V

  • Vahdati.Mehdi Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]

Y

  • Yasemi.Hesameddin Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [ Vol.7, Issue 4 - Autumn Year 2018]
  • Yousefi.Afshin A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [ Vol.7, Issue 3 - Summer Year 2018]

Z

  • Zarepour.Hamid The Effect of Al2O3-MWCNT Hybrid Nanofluid on Surface Quality in Grinding of Inconel 600 [ Vol.7, Issue 3 - Summer Year 2018]