Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method

Subject Areas : Surface Engineering

Mahdi Raoufi ¹ , A. Zolanvari ² , Majid zarezadeh ³

1 - Department of Materials Science and Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran
2 - b Department of Physics, Faculty of Science, Arak University, Arak, Iran.
3 - a Department of Materials Science and Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran.

Received: 2017-07-04 Accepted : 2018-10-20 Published : 2018-11-05

Keywords: tin, Residual Stress, plasma assisted chemical vapor deposition, GIXRD,

Abstract :

In this study, thin layers of titanium nitride (TiN) were deposited on H13 steel substrates at different duty cycles and temperature of 520 ˚C using plasma assisted chemical vapor deposition (PACVD). Uniaxial residual stress was calculated by X-ray diffraction (XRD) and Sin2 Ψ method. Then the residual stress of the samples were measured by Grazing Incidence X-ray Diffraction (GIXRD) method and lattice parameter diagrams versus f(Ψ). Depth of penetration and texture coefficient in the samples were also evaluated. The surface morphology was examined using field-emission gun scanning electron microscope (FESEM) and the relationship of the stress and micro hardness test was also expressed. The results showed that by reducing duty cycles, residual stress decreases as well as with more changes of the lattice parameter, more changes of residual stress will be seen. Also, the microstructure result was in good agreement with theory and clearly displayed spherical morphology and uniform distribution of the created phases