Improved Physicochemical Properties of Tapioca Starch / Bovine Gelatin Biodegradable Films with Zinc Oxide Nanorod

Subject Areas : Journal of Chemical Health Risks

Mohammad Mehdi Marvizadeh ¹ , Abdorreza Mohammadi Nafchi ² , Maryam Jokar ³

1 - Food Biopolymer Research Group, Food Science and Technology Department, Damghan Branch, Islamic Azad University, Damghan, Semnan, Iran
2 - Food Biopolymer Research Group, Food Science and Technology Department, Damghan Branch, Islamic Azad University, Damghan, Semnan, Iran
3 - Food Biopolymer Research Group, Food Science and Technology Department, Damghan Branch, Islamic Azad University, Damghan, Semnan, Iran

Received: 2014-11-30 Accepted : 2018-10-29 Published : 2018-10-29

Keywords: Bionanocomposite, Zinc oxide nanorod, Physicochemical properties, WVP, Tapioca starch,

Abstract :

The effects of zinc oxide nanorod (ZnO-N) incorporation on thephysicochemical properties of tapioca starch / bovin gelatin composite film such as water absorption capacity (WАC), water solubility and permeability to water vapour (WVP) were investigated. In this search, ZnO-N was homogenized by sonication and added into tapioca starch / bovine gelаtin dispersions аt different concentrations (e.g. 0.5, 2, and 3.5% w/w total solid). Incorporation of 3.5% of nanoparticles to tapioca starch / bovine gelatin films decreased the permeability to water vapor by 18%. Water absorption capacity and Solubility of the films were decreased by increasing the ZnO-N contents. These properties suggest that ZnO-N has the potential as filler in starch /gelatin-based films for using in pharmaceutical and food packaging industries

References:

1. Neethirajan S., Jayas D.S., 2010. Nanotechnology for the Food and Bioprocessing Industries. Food and Bioprocess Technology. 10, 1007/s11947-010-0328-2.
2. Raquez J.M., Habibi Y., Murariu M., Dubois P., 2013. Polylactide (PLA)-based nanocomposites. Polymer Science. 18(2), 458-497
3. Xie F., Pollet E., Halley P.J., Avérous L., 2013. Starch-basednano-biocomposites. Prog Polym Sci. 49, 291-295.
4. Rhim J., Ng P.K.W., 2007. Natural biopolymer-based nanocomposite films for packaging applications. Crit Rev Food Sci and Nutr. 47(4), 411ââ‚‌“433.
5. Hussain F., Hojjati M., Okamoto M.,Gorga R.E., 2006. Review article: polymermatrix nanocomposites, processing, manufacturing and application. Journal of Composite Materials. 40 (17), 1511ââ‚‌“1575.
6. Lin W., Xu Y., Huang C.C., Ma Y., Shannon K., Chen D.R., Huang Y.W., 2009.Toxicity of nano- and micro-sized ZnO particles in human lung epithelial cells. Journal of Nanoparticle Research.11, 25-39.
7. Mohammadi Nafchi A., Nassiri R., Sheibani S., Ariffin F., Karim A.A., 2013. Preparation and characterization of bionanocomposite films filled with nanorod-rich zinc oxide. Carbohydr Polymers. 96, 233-239.
8. Alebooyeh R., Mohammadi Nafchi A., Jokar M., 2012. The Effects of ZnO nanorods on the Characteristics of Sago Starch Biodegradable Films. Journal of Chemical Health Risks. 2, 13-16.
9. Mohammadi Nafchi A., Alias A.K., Mahmud S., Robal M., 2012. Antimicrobial, rheological and physicochemical properties of sago starch films filled with nanorod-rich zinc oxide. J Food Eng.113, 511ââ‚‌“519.
10. Espita P.J.P., Soares N.D.F.F, Coimbra J.S.D.R., Andrade N.J.D., Cruz R.S., Medeiros E.A.A., 2012. Zinc Oxide Nanoparticles: Synthesis, Antimicrobial Activityand Food PackagingApplications. Food Bioprocess Technol. 5,1447ââ‚‌“1464.
11. Giannelis E.P., 1996. Polymer layered silicate nanocomposites. Advanced Materials. 8, 29ââ‚‌“35.
12. Zhao R.,Torley P., Halley P.J., 2008. Emerging biodegradable materials: starch- and protein-basedbio-nanocomposites. Journal Mater Science. 43, 3058ââ‚‌“3071.
13. Sinha Ray S., Bousmina M., 2005. Biodegradable polymers and their layeredsilicate nanocomposites: in greening the 21st century materials world. Progress in Materials Science. 50:962ââ‚‌“1079.
14. Sinha Ray S., Okamoto M., 2003. Polymer/layered silicate nanocomposites: a review from preparation to processing. Progress in Polymer Science. 28,1539ââ‚‌“641.
15. Yu H., Zhang Z., Han M., Hao XT., Zhu FR., 2005. A general low-temperature route for large-scale fabrication of highly oriented ZnOnanorod/nanotubearrays. J Am Chem Soc. 127(8), 2378ââ‚‌“2379.
16. Anas S., Mangalaraja R., Ananthakumar S., 2010. Studies on the evolution of ZnOmorphologies in a thermohydrolysis technique and evaluation of their functional properties. J Hazard Mater. 175:889ââ‚‌“895.
17. Shahrom M., Abdullah M.J., 2007. Tapered head of ZnO nanorods. Journal of Solid State Science and Technology. 15 (1), 108ââ‚‌“115
18. Liu H.L., Yang T.C.K., 2003. Photocatalytic inactivation of Escherichia coli and Lactobacillus helveticus by ZnO and TiO2 activated with ultraviolet light. Process Biochemistry.39, 475-481.
19. Mohammadi Nafchi A., Cheng L.H., Karim A.A., 2011. Effects of plasticizers on thermal properties and heat sealability of sago starch films. Food Hydrocolloids. 25, 56-60.
20. Yu J., Yang J., Liu B., Ma X., 2009. Preparation and characterization of glycerol plasticized-peastarch/ZnO-carboxymethylcellulose sodium nanocomposites. Bioresource Technology.100, 2832-2841.
21. ASTM, Standard Test Methods for Water Vapor Transmission of Materials E96/E96M-05. In Annual Book of ASTM Standards, Philadelphia, PA, 2005.
22. Kiatkamjornwong S., Chomsaksakul W., Sonsuk M., 2000. Radiation modifica-tion of water absorption of cassava starch by acrylic acid/acrylamide. Radiation Physics and Chemistry. 59(4), 413ââ‚‌“427.
23. Maizura M., Fazilah A., Norziah M.H., Karim A.A., 2007. Antibacterial Activity and Mechanical Properties of Partially Hydrolyzed Sago Starchââ‚‌“Alginate Edible Film Containing Lemongrass Oil. Journal of Food Science.72, C324-C330.
24. Nielsen L.E., 1967. Models for the Permeability of Filled Polymer Systems. Journal of Macromolecular Science: Part A ââ‚‌“ Chemistry. 1, 929 - 942.
25. Tunc S., Duman O., 2010. Preparation and characterization of biodegradablemethyl cellulose/montmorillonitenanocomposite films. Applied Clay Science. 48(3), 414ââ‚‌“424.
26. Karim A.A., Tie A.P.L., Manan D.M.A., Zaidul I.S.M., 2008. Starch from the sago (Metroxylonsagu) palm tree ââ‚‌“ properties, prospects, and challenges as a new industrial source for food and other uses. Comprehensive Reviews in Food Science and Food Safety. 7 (3), 215ââ‚‌“228.