Finite Element Method Application in Analyzing Magnetic Fields of High Current Bus Duct

Subject Areas : journal of Artificial Intelligence in Electrical Engineering

Received: 2015-08-04 Accepted : 2015-08-04 Published : 2013-05-01

Keywords: magnetic field, High Current Bus Duct, Meshed-Finite Element, Gas Insulated Lines (GIL),

Abstract :

The goal of paper is to present the magnetic field calculations in high current bus ducts. Finiteelement method is used to do this. Bus ducts under study have figure such as circle area. Thecalculations will be using mathematical relations, meshed geometric shape and analyzing them.Geometric mean will help us to determine the value of magnetic field. COMSOL software is appliedfor simulation studies. Calculations have been analyzed in three phase state and also, simulations areimplemented into the three dimensional position. Demonstration procedure and numericalcalculations are used for presentation the front of view of bus duct. Skin effect and connectionconfiguration between bus ducts are considered in the calculations. Aforementioned method can beused in the magnetic fields analyzing in transmission lines and electrical energy link which consist ofinsulator, easily. Typical bus duct which is applied in simulation studies produced by a pars generatorcorporation, it has been installed in Ardebil substation.

References:

[1] Benato, R,”Gas Insulated Transmission Lines in Railway
Galleries”, IEEE Trans. Power Deliv.2005, 20, pp: 704–
709.
[2] Piatek, Z., Kusiak, D., Szczegielniak,
T.,”Electromagnetic Field and Impedances of High
Current Busducts”, In Proceedings of the International
Symposium Modern Electric Power Systems (MEPS),
Wroclaw, Poland, 20–22, Sep 2010.
[3] Surutka, J. “Electromagnetics, 2nd ed.; Engineering
Books”, Belgrade, Yugoslavia, 1966 (in Serbian).
S.M.H.Hoseyni, V.Montaghemi: Finite Element Method Application in Analyzing Magnetic …
00
[4] Sarajčev, P., Goić, R.”Power loss computation in high-current generator bus ducts of rectangular cross-section”, Electric Power Compon. Syst. 2010, 38, 1469–1485. [5] K. B. Madhu Sahu and J. Amarnath,” Effect of Various Parameters on the Movement of Metallic Parameters in a Single Phase Gas Insulated Bus Duct With Image Charges and Dielectric Coated Electrodes”, ARPN Journal of Engineering and Applied Sciences, VOL. 5, NO. 6, JUNE 2010. [6] K.B. Madhu Sahu and J. Amarnath,” Movement of metallic particle contamination in a gas insulated busduct under dielectric coated enclosure with electromagnetic field effect”, Indian Journal of Science and Technology, Vol. 3 No. 7, July 2010. [7] L. Rajasekhar , D. Subbarayudu, and J. Amarnath,” Metallic Particle Motion in A Single Phase Gas Insulated Busduct Under the Influence of Power Frequency Voltages”, International Journal of Electronic and Electrical Engineering, Volume 3, Number 12010. [8] http://www.comsol.com.