Presenting a New Fault Current Limiter Structure to Reduce the Over-voltage of the DFIG DC Link in the Voltage Sag Condition
محورهای موضوعی : Electrical Engineering
Mohsen Ghorbani
1
(Department of Electrical Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran)
Babak Mozafari
2
(Department of Electrical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran)
Mehdi Firouzi
3
(Department of Electrical Engineering, Abhar Branch, Islamic Azad University, Abhar, Iran)
Farzad Golshan
4
(Department of Electrical Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran)
کلید واژه: Wind farm, Multi-Functional Capacitive Fault Current Limiter, Transmission Line,
چکیده مقاله :
In this study a new type of fault current limiter is introduced. It has been named multi-functional capacitive fault current limiter (MCFCL). as a variable capacitor, its function is to control active power flow in normal conditions as well as improving the capability of low voltage rid-through (LVRT) in fault operating conditions. The new structure has been proposed based on the capacitive bridge-type fault current limiter (BFCL) and the RL-type fault current limiter (FCL), which is modified to enhance low-voltage ride-through capability. To assess the efficacy of proposed fault current limiter, the time domain simulations were executed in PSCAD/EMTDC software and its function is compared with the RL-type SSFCLs in normal and symmetrical or asymmetrical fault conditions. Also its efficacy has been evaluated in a fixed speed based wind farm. The result of simulations showed that the MCFCL is not only able to control the power flow in normal operating condition, but also improves the LVRT performance in fault operating condition in the wind farms.
[1] Transmission Code. Network and System Rules of the German Transmission System Operators, Verband der
Netzbetreiber VDNe.v. beim BDEW. [Online]. Available: www.bdew.de/ Aug. 2007
[2] F. Iov, A. D. Hansen, P. Sørensen, and N. A. Cutululis, “Mapping of grid faults and grid codes,” Risø Nat. Lab.,
Tech. Univ. Denmark, Copenhagen, Denmark, Rep. Risø-R-1617-(EN), Jul. 2007
[3] J. Lopez, P. Sanchis, X. Roboam, and L. Marroyo, “Dynamic Behavior of the Doubly Fed Induction Generator
During Three Phase Voltage Dips,” IEEE Trans. Energy Convers,2007, 22(3), pp. 709-717
[4] M. Rahimi and M. Parniani, “Transient Performance Improvement of Wind Turbines With Doubly Fed Induction
Generators Using Nonlinear Control Strategy”, IEEE Trans. Energy Convers,2010, 25(2), pp. 514-525
[5] C. Wessels, N. Hoffmann, M. Molinasr, and F. Wilhelm Fuchs.: ‘STATCOM Control at Wind Farms With Fixed-
Speed Induction Generators Under Asymmetrical Grid Faults’. IEEE Transactions on Industrial Electronics, 2013, 60(7), pp. 2864 – 2873
[6] J.A. Suul, M. Molinas, T. Undeland.: ‘STATCOMBased Indirect Torque Control of Induction Machines
During Voltage Recovery After Grid Faults’, IEEE Transactions on Power Electronics, 2010, 25(5), pp. 1240-
1250
[7] A. Causebrook, D. J. Atkinson, and A. G. Jack.: ‘Fault Ride-Through of Large Wind Farms Using Series Dynamic
Braking Resistors’, IEEE Transaction on Power System, 2007, 22(3), pp. 966 – 975
[8] P. Huang, M. Sh. El Moursi, S. A. Hasen.: ‘Novel Fault Ride-Through Scheme and Control Strategy for
Doubly Fed Induction Generator-Based Wind Turbine’, IEEE Transactions on Energy Conversion, 2015, 30(2), pp.
635 – 645
[9] L. Huchel, M. S. El Moursi , H. H. Zeineldin.: ‘A Parallel Capacitor Control Strategy for Enhanced FRT
Capability of DFIG’, IEEE Transactions on Sustainable Energy , 2015, 6(2), pp. 303 – 312
[10] Kh. Goweily, M. Sh. El Moursi, M. Abdel-Rahman, M. A. L. Badr.: ‘Voltage booster scheme for enhancing the
fault ride-through of wind turbines’, IET Power Electronics, 2015, 8(10), pp. 1853-1863
[11] S. M. Muyeen.: ‘A Combined Approach of Using an SDBR and a STATCOM to Enhance the Stability of a Wind
Farm’, IEEE Systems Journal 2015, 9(3), pp. 922–932
[12] S. M. Muyeen, M. H. Ali, R. Takahashi, T. Murata, and J. Tamura.: ‘Transient stability enhancement of wind
generator by a new logical pitch controller’, IEEJ Transactions on Power and Energy, 2006, 126(8), pp. 742– 752
[13] M. J. Hossain, H.R. Pota , V. A. Ugrinovskii and R.A.Ramos.: ‘Simultaneous STATCOM and Pitch Angle
Control for Improved LVRT Capability of Fixed-Speed Wind Turbines’, IEEE Transactions on Sustainable Energy.,2010, 1(3), pp. 142–151
[14] L. Wang, and Q. S. Vo.: ‘Power Flow Control and Stability Improvement of Connecting an Offshore Wind
Farm to a One-Machine Infinite-Bus System Using a SSSC’, IEEE Transactions on Sustainable Energy, 2013, 4(2), pp. 358 - 369
[15] A. E. Leon, M. F. Farias, P. E. Battaiotto, J. A. Solsona.: ‘Control Strategy of a DVR to Improve Stability in Wind
Farms Using Squirrel-Cage Induction Generators’, IEEE Transactions on Power System, 2011, 26(3), pp. 1609 – 1617
[16] F. K. A. Lima, A. Luna, P. Rodriguez, E. H. Watanabe, and F. Blaab jerg, “Rotor voltage dynamics in the doubly
fed induction generator during grid faults,” IEEE Trans. Power Electron. 2010, 25(1), pp. 118–130
[17] J. Liang, W. Qiao, and R. G. Harley, “Feed-forward transient current control for low-voltage ride-through
enhancement of DFIG wind turbines,” IEEE Trans. Energy Convers. 2010, 25(3), pp. 836–843
[18] J. Yao, H. Li, Y. Liao, and Z. Chen, “An improved control strategy of limiting theDC-link voltage fluctuation for a doubly fed induction wind generator,” IEEE Trans. Power Electron. 2008, 23(3), pp. 1205–1213
[19] A. R. Fereidouni, B. Vahidi and T. Hosseini Mehr, "The Impact of Solid State Fault Current Limiter on Power
Network With Wind-Turbine Power Generation," in IEEE Transactions on Smart Grid, 2013, 4(2), pp. 1188-1196.