Optimum Selection of Drill Bits for Drilling Operations in Sarvak and Asmari Formations Using a Fuzzy Multiple Criteria Decision-Making Approach
Subject Areas : Fuzzy Optimization and Modeling Journal
آرش ابراهیم آبادی
1
,
سیاوش مرادی
2
1 - گروه مهندسی معدن، واحد قائم شهر، دانشگاه آزاد اسلامی، قائم شهر، ایران
2 - گروه مهندسی نفت، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
Keywords: Asmari Formation, Sarvak Formation, Fuzzy TOPSIS, Bit Selection,
Abstract :
Proper decision making in drilling bit selection issue may contribute to drilling efficiency and considerable cost reduction. Since the bit selection is a Multiple Criteria Decision-Making (MCDM) problem, MCDM techniques are the most powerful approaches to be applied in such cases. In this study, among MCDM approaches and with respect to great accuracy and validity of results, fuzzy TOPSIS method is utilized for optimum bit selection for drilling operations in Sarvak and Asmari formations in an Iranian oil field. With this regard, three types of bits (i.e. 517, 527 and 537) candidate in Asmari & Sarvak formations are analysed using fuzzy TOPSIS method to rank and prioritize the alternatives, leading to choose the best option. Considering bits operating in Asmari formation, similarity factors for bit types of 517, 527 and 537 bits found to be 0.479, 0.438 and 0.382, respectively indicating bit type 517 can be considered a proper option compared to other ones. Similarly, achieved results from application of fuzzy TOPSIS approach in Sarvak formation shows 0.5405, 0.5019 and 0.5622 values for 517, 527 and 537 bit types respectively, demonstrating the bit type 537 is the most appropriate alternative in Sarvak formation.