-
المقاله
1 - Synthesis 3 and 4-Dihydropyrimidinone and Thiones using Multi-Walled Carboxylated Carbon Nanotube Catalystsjournal of chemical reactivity and synthesis , العدد 4 , السنة 9 , تابستان 2019In the present study, the synthesis of 3 and 4-dihydropyrimidinone and thiones was investigated by Biginelli reaction in the presence of carbon dioxide nanoparticles (MWCNT COOH) as a catalyst. The use of carbon nanotubes has many advantages, including ease of product s أکثرIn the present study, the synthesis of 3 and 4-dihydropyrimidinone and thiones was investigated by Biginelli reaction in the presence of carbon dioxide nanoparticles (MWCNT COOH) as a catalyst. The use of carbon nanotubes has many advantages, including ease of product separation, catalyst recovery capability, and environmental compatibility compared to liquid acidic catalysts. These catalysts are insoluble in most organic solvents and cause little corrosion. In addition, the catalyst is recovered without any reduction in its activity. Therefore, these catalysts can be used as a substitute for catalysts such as sulfuric acid. To investigate the effect of the catalyst on the organic reaction mentioned and to find the optimal conditions, first the synthesis of a derivative is selected as the reaction model and the effect of different reaction conditions such as the amount of catalyst, solvent type and temperature on it is examined. Other derivatives were then prepared under optimal conditions. In most cases, high product efficiency was achieved in a relatively short period of time. Comparing the conditions and results of the reactions performed in this study with other methods reported in the articles shows that the catalyst studied in this study was able to make the conditions of the reaction discussed in terms of time and efficiency, simple separation of products possible. تفاصيل المقالة -
المقاله
2 - بهینه سازی نانو ذره مونت موریلونیت در حذف قلع از پسابکاربرد شیمی در محیط زیست , العدد 5 , السنة 10 , زمستان 1398در این تحقیق کارایی نانوذره مونت موریلونیت به منظور حذف فلز قلع از پساب مورد بررسی قرار گرفت. نانو رس خام در شرایط 5/5=pH، دمای محیط، مقدار 12/0 گرم در 100 میلیلیتر محلول ppm100 ، 90 دقیقه زمان تماس برای قلع ، غلظت قلع را به ppm5/88 کاهش داد. پس از شستوشوی نانو رس به أکثردر این تحقیق کارایی نانوذره مونت موریلونیت به منظور حذف فلز قلع از پساب مورد بررسی قرار گرفت. نانو رس خام در شرایط 5/5=pH، دمای محیط، مقدار 12/0 گرم در 100 میلیلیتر محلول ppm100 ، 90 دقیقه زمان تماس برای قلع ، غلظت قلع را به ppm5/88 کاهش داد. پس از شستوشوی نانو رس به وسیلهی اسید سولفوریک 1/0 مولار و انجام آزمایش جذب در شرایط فوق، غلظت قلع به ppm65 کاهش یافت و ظرفیت جذب قلع توسط نانو رس خام و شسته شده به ترتیب 6/9 و 7/29 میلیگرم بر گرم حاصل شد که با مطالعات قبلی نیز مطابقت دارد. در pH غلظت فلز قلع توسط نانو رس اصلاح شده با HQ از ppm100 به ppm4/59 و توسط نانو رس اصلاح شده با SDS به ppm63/56 کاهش یافته و ظرفیت جذب به ترتیب برابر با 83/33 و 14/36 میلیگرم بر گرم حاصل شد. مشاهده میشود نانو رس اصلاح شده با SDS برای فلز قلع نتایج بهتری را به همراه داشته است. سپس مطالعات مربوط به ایزوترم، سینتیک و ترمودینامیک جذب انجام شد. در مطالعات ایزوترم با ثابت نگه داشتن مقدار جاذب(12/0گرم)، زمان تماس، دما، 5/5=pH و حجم 100 میلیلیتر، مقادیر غلظتهای اولیه یون فلزی 50، 100 و ppm200 بررسی شد.بررسیهای ترمودینامیکی نشان میدهد با ثابت نگه داشتن پارامترهایی مانند غلظت اولیه، pH، زمان تماس، مقدار جاذب و حجم محلول در حالتهای بهینه در دماهای 298، 313 و 333 کلوین، افزایش دما باعث افزایش ظرفیت جذب میشود که بیانگر گرماگیر بودن واکنش است تفاصيل المقالة