-
المقاله
1 - بهبود پایداری یک سیستم قدرت مجهز به SVC بر اساس کمینه سازی تابع انرژی در یک ساختار کنترل هماهنگ بهینه چند مدلهفناوری های نوین مهندسی برق در سیستم انرژی سبز , العدد 8 , السنة 2 , زمستان 1402در این مقاله، بهبود میرایی نوسانات فرکانس پایین (LFO) در یک سیستم قدرت شامل SVC بررسی شده است. برای نیل به این هدف، استراتژی کنترلی جدیدی ارائه شده که در آن کنترلکننده چندمدله با استفاده از کنترلکننده بهینه خطی (LOC) و الگوریتم ازدحام ذرات (PSO) بهینه سازی میشود. بان أکثردر این مقاله، بهبود میرایی نوسانات فرکانس پایین (LFO) در یک سیستم قدرت شامل SVC بررسی شده است. برای نیل به این هدف، استراتژی کنترلی جدیدی ارائه شده که در آن کنترلکننده چندمدله با استفاده از کنترلکننده بهینه خطی (LOC) و الگوریتم ازدحام ذرات (PSO) بهینه سازی میشود. بانک کنترل در کنترلکننده چند مدله، شامل سه کنترل کننده LOC است که از طریق خطی سازی معادلات غیر خطی سیستم و کمینه سازی یک تابع انرژی، سیگنالهای بهینهای را تولید میکنند تا پس از ترکیب شدن بوسیله الگوریتم بازگشتی بیز بطور همزمان به سیستم تحریک ژنراتور و به SVC اعمال شوند. برای ایجاد سیگنال بهینه خطی بایستی معادله ریکاتی حل شود؛ این معادله دارای دو ماتریس وزنی Rric و Qric میباشد که بوسیله الگوریتم PSO بهینه سازی شدهاند. الگوریتم PSO با دو تابع هدف ماکزیمم سازی کوچکترین جزء حقیقی در مقادیر ویژه و مینیممسازی سطح زیر منحنی قدر مطلق انحراف سرعت، Rric و Qric بهینه را محاسبه نموده است. برای ارزیابی استراتژی کنترلی MMC-LOC-PSO خطای سه فاز متقارنی بر روی بدترین باس اعمال شده و نتایج این دو تابع هدف با یکدیگر مقایسه شده است. شبیهسازی سیستم قدرت تک ماشینه با کد نویسی درMATLAB انجام شده و نشان میدهد استراتژی کنترلی پیشنهادی، ضمن حفظ پایداری، LFO را نیز بطور موثری میرا میکند، خطای ماندگار سرعت و زاویه روتور را نیز به طور مطلوبی به سمت صفر سوق داده است. تفاصيل المقالة -
المقاله
2 - یک مطالعة موردی جهت بهینه سازی سیستم اتصال زمین مخازن ذخیره مواد نفتی اصفهانروشهای هوشمند در صنعت برق , العدد 2 , السنة 9 , تابستان 1397با توجه به موارد زیاد آتش سوزی که در اثر صاعقه و بارهای الکتریکی ساکن در مخازن نفتی کشور اتفاق افتاده است، در این مقاله ابتدا طرح موجود نمونه ای از مخازن نفتی در شرکت خطوط لوله و مخابرات نفت منطقه اصفهان مورد بحث و نقد قرار گرفته و با اندازه گیری میدانی مقاومت ویژه خاک أکثربا توجه به موارد زیاد آتش سوزی که در اثر صاعقه و بارهای الکتریکی ساکن در مخازن نفتی کشور اتفاق افتاده است، در این مقاله ابتدا طرح موجود نمونه ای از مخازن نفتی در شرکت خطوط لوله و مخابرات نفت منطقه اصفهان مورد بحث و نقد قرار گرفته و با اندازه گیری میدانی مقاومت ویژه خاک و سایر پارامترهای مورد نیاز سیستم زمین آن مدل سازی و شبیه سازی کامپیوتری آن در محیط نرم افزار CYMGRD صورت گرفت و معایب آن بررسی و طرح بهینه با توجه به شرایط محیط و رعایت ملاحظات انتخاب و توصیه گردیده است. در ادامه روشهای مختلف ممکن برای مقابله با خطرات آتش سوزی مخازن بررسی و توصیه هایی جهت بهینه سازی همبندی و هم پتانسیل سازی اجزا مختلف مخازن و نحوه بهره برداری از آنها جهت کاهش احتمال آتش سوزی و حریق مخازن ذخیره نفتی صورت گرفته است. نتایج این تحقیق نشان می دهد که ایمنی در برابر صاعقه و الکتریسیته ساکن چندان به سیستم زمین مخزن بستگی نداشته و روشها و نحوه همبندی و هم پتانسیل سازی اجزا مخزن و علی الخصوص سقف شناور و نوع بهره برداری از مخازن ذخیره نفتی از اهمیت بالاتری برخورداراست. تفاصيل المقالة -
المقاله
3 - هماهنگی تولید واحدهای آبی تلمبهای– ذخیرهای، مزارع بادی و تولید سنتی انرژی با توجه به رشد سالیانه بارروشهای هوشمند در صنعت برق , العدد 2 , السنة 4 , تابستان 1392با توجه به روند افزایش مصرف انرژی الکتریکی و تمایلات جهانی برای جایگزینی و تأمین توان مورد نیاز به وسیله منابع انرژی تجدید پذیر و ذخیره کنندههای انرژی، در این مقاله الگوریتمی ابتکاری مبتنی بر قابلیت اطمینان برای برنامهریزی هماهنگ آنها در سیستم قدرت پیشنهاد شده است. ب أکثربا توجه به روند افزایش مصرف انرژی الکتریکی و تمایلات جهانی برای جایگزینی و تأمین توان مورد نیاز به وسیله منابع انرژی تجدید پذیر و ذخیره کنندههای انرژی، در این مقاله الگوریتمی ابتکاری مبتنی بر قابلیت اطمینان برای برنامهریزی هماهنگ آنها در سیستم قدرت پیشنهاد شده است. برای محاسبه میزان توان بادی و ذخیره ساز مورد نیاز با توجه به روند خروج تدریجی توان سنتی و رشد بار سالیانه 5%، از شاخص قابلیت اطمینان LOLE استفاده شده است. برای این منظور LOLE محاسبه شده در اولین سال به عنوان شاخص مرجع برای برآورد میزان مورد نیاز توان بادی و ذخیره ساز در سالهای بعد به ازای رشد بار و خروج تدریجی توان سنتی به کار رفته و سپس به کمک روش مونت کارلو در هر سال ظرفیتهای فوق برآورد شدهاند. روش پیشنهادی بر روی شبکه تست IEEE-RTS پیاده سازی و شبیه سازی شده است. تفاصيل المقالة -
المقاله
4 - ارائه الگوریتم چند عاملة قابل انعطافی برای بازیابی سریع شبکههای توزیع، سازگار با محیطGISروشهای هوشمند در صنعت برق , العدد 2 , السنة 5 , تابستان 1393پیکربندی شبکههای توزیع به دنبال وقوع خطا و خارج شدن بخش معیوب شبکه، باید به سرعت تغییر کند تا بخشهای سالم مجدداً برقدار شوند. این کار که در اصطلاح بهره برداران مانور و در اصطلاح آکادمیک بازیابی سیستم نامیده میشود، محتاج یک آلگوریتم منطقی، سریع و قابل انعطاف برای همة أکثرپیکربندی شبکههای توزیع به دنبال وقوع خطا و خارج شدن بخش معیوب شبکه، باید به سرعت تغییر کند تا بخشهای سالم مجدداً برقدار شوند. این کار که در اصطلاح بهره برداران مانور و در اصطلاح آکادمیک بازیابی سیستم نامیده میشود، محتاج یک آلگوریتم منطقی، سریع و قابل انعطاف برای همة آرایشهای شبکه است. در سالهای اخیر با استقرار سیستمهای GIS در شبکههای توزیع، نحوة درج اطلاعات شبکه در کامپیوترها دگرگون شده و در عمل امکان رؤیت شبکه توسط کامپیوتر، چنانکه در نرم افزارهای سنتی سیستم بود، وجود ندارد. در این مقاله با تعریف مناسب ارتباط بین شرکاء شبکه، علاوه بر تشخیص سریع منطقه مواجه با اتصالی و مناطق بی برق متأثر از آن، براساس اطلاعات دیجیتال موجود در بانکهای GIS، میزان بار از دست رفته مشخص گردیده و با توجه به ظرفیت مسیرهای قابل دسترس، استراتژی بهینه بازیابی انتخاب میشود. آلگوریتم پیشنهادی در محیط Matlab روی یک شبکه توزیع سه فیدره پیچیده شبیه سازی شده و سرعت و دقت آن محک زده میشود. تفاصيل المقالة -
المقاله
5 - Implementing a Practical Light Transmission System in order to Lighting an Office with Zero Energy ConsumptionJournal of Simulation and Analysis of Novel Technologies in Mechanical Engineering , العدد 2 , السنة 9 , زمستان 2016One of the recently considered applications of fiber optic, in their usage in building lighting systems. In this research, in order to reduce energy consumption, by transmission of sun light from the roof to the desired place (i.e. an office), the required standard lumi أکثرOne of the recently considered applications of fiber optic, in their usage in building lighting systems. In this research, in order to reduce energy consumption, by transmission of sun light from the roof to the desired place (i.e. an office), the required standard luminance is produced. The main aims of this research are :1. Reduction of energy consumption.2. Making the place compatible with the human favorable mental conditions and environment.3. Preparing the basics of mass production of the system and economical benefits for the universityIn this research besides concentrating the sun light to magnify its density, some investigations are made for light transmission by fiber optics, because, no mathematical model was found for this per pose, practical tests are made in addition to statistical analysis.Using different lenses and fiber optics and a position control system (which specially designed for this research), many experiences were made and iluminances were measured by a lux meter. After that by SPSS V.17 software, the results were analyzed. Finally the best Lenz and fiber were selected and a straight forward method was presented for designing a typical office in such manner. تفاصيل المقالة -
المقاله
6 - A quick method for electrical energy system load shedding based on equivalent areasJournal of Simulation and Analysis of Novel Technologies in Mechanical Engineering , العدد 4 , السنة 14 , تابستان 2022The main purpose of the paper is to present a fast load shedding scheme, based on the concept of equivalent areas in large power systems. Performing load shedding on such systems with several generators in each area by using the conventional method is consuming a large أکثرThe main purpose of the paper is to present a fast load shedding scheme, based on the concept of equivalent areas in large power systems. Performing load shedding on such systems with several generators in each area by using the conventional method is consuming a large amount of time. The proposed method can significantly reduce energy not supplied and is absolutely affordable for not only energy producers, but also energy consumers. At first, the coherent generators in the network will be detected based on a generation acceleration technique. The coherent generators will be identified without performing transient stability studies or the comparison of rotor swing angles, and only will be detected by using Jacobian matrix elements of the linearized power system model. Each group of the coherent generators will be replaced by an equivalent generator to introduce a new reduced model. All analytical calculation and decision variable factors will be achieved centrally with mentioned model and the only signal sends to the network, is a load shedding command. UVLS technique will be applied to the load shedding scheme. In this method, the priority is to shed the busloads with the most amplitude of the voltage drop after disturbance, so the network voltage and frequency stability will be maintained. The scale of load shedding level is proportional to online mismatch power between generation and demand. Finally, a simulation of the standard 39-buses IEEE network will be carried out to prove the strategy’s effectiveness. تفاصيل المقالة -
المقاله
7 - Presenting a New Algorithm for Determining Optimal Replaceable Capacity of Conventional Power Plants by Renewable Power Plants Based on Monte Carlo MethodJournal of Simulation and Analysis of Novel Technologies in Mechanical Engineering , العدد 1 , السنة 6 , تابستان 2014Given the substitution process of generators using renewable energy sources instead of conventional generators in modern power systems, this paper proposes a Monte Carlo based method to determine an optimal level of this change. At first, LOLE index of the system was ca أکثرGiven the substitution process of generators using renewable energy sources instead of conventional generators in modern power systems, this paper proposes a Monte Carlo based method to determine an optimal level of this change. At first, LOLE index of the system was calculated without wind power to obtain the reference index. Then, the wind turbine units are replaced with the conventional generators. This purpose has been achieved in stages with the gradually reduced portion of conventional generators and increased portion of the of wind turbine generators in order to pave the way for the calculation of the required amount of wind power using Monte Carlo simulation method. The LOLE index at each step was compared with the base LOLE index. In the end, the 5% annual load increment rate in the development strategy with the focus on sole wind power generation was investigated and the power needed for each load increment was calculated. The proposed method was implemented on IEEE-RTS system تفاصيل المقالة -
المقاله
8 - Implementing a Practical Light Transmission System in order to Lighting an Office with Zero Energy ConsumptionJournal of Simulation and Analysis of Novel Technologies in Mechanical Engineering , العدد 5 , السنة 8 , پاییز 2015One of the recently considered applications of fiber optic, in their usage in building lighting systems. In this research, in order to reduce energy consumption, by transmission of sun light from the roof to the desired place (i.e. an office), the required standard lumi أکثرOne of the recently considered applications of fiber optic, in their usage in building lighting systems. In this research, in order to reduce energy consumption, by transmission of sun light from the roof to the desired place (i.e. an office), the required standard luminance is produced. The main aims of this research are : 1. Reduction of energy consumption. 2. Making the place compatible with the human favorable mental conditions and environment. 3. Preparing the basics of mass production of the system and economical benefits for the university In this research besides concentrating the sun light to magnify its density, some investigations are made for light transmission by fiber optics, because, no mathematical model was found for this per pose, practical tests are made in addition to statistical analysis. Using different lenses and fiber optics and a position control system (which specially designed for this research), many experiences were made and iluminances were measured by a lux meter. After that by SPSS V.17 software, the results were analyzed. Finally the best Lenz and fiber were selected and a straight forward method was presented for designing a typical office in such manner تفاصيل المقالة