In this paper, the quasi-static test and the damage of the thin-walled composite cylinder were numerically simulated using ABAQUS. Then, a comparison was made between the results of this simulation and those obtained from experimental studies followed by their validation. In the next step, several parameters affecting the energy absorption rate including outer diameter-to-cylinder height ratio, thickness-to-outer diameter ratio, and angle of damage initiation mechanism were selected. They were optimized by modelling different states in ABAQUS. The number of tests is reduced by the design of experiments using response surface methodology and the optimal specimen is extracted by this software. Finally, optimum adsorbent is fabricated and tested. Considering enhanced energy absorption, increased mean reaction force, and reduced initial maximum force, the optimal design parameters include the inner diameter-to-cylinder height ratio of 0.2, thickness-to-inner diameter ratio of 0.1, and angle of damage initiation mechanism of 45°. تفاصيل المقالة

In this paper bending and buckling characteristics of third-order shear, and deformation nanoplates were investigated using the modified couple stress theory and Navier type solution. It can be useful for designing and manufacturing micro-electromechanical and nano-electromechanical systems. The modified couple stress theory was applied to provide the possibility of considering the effects of small scales that have only one material length scale parameter. In this theory, the strain energy density is a function of the strain tensor components, curvature tensor, stress tensor, and the symmetric part of the couple stress tensor. After obtaining the strain energy, external work, and buckling equations, the Hamilton principle is employed to derive the governing equations. Furthermore, by applying boundary and loading conditions in the governing equations, the bending and buckling of a third-order shear deformation nanoplate with simply-supported bearings are obtained and the Navier’s solution is used to solve the equations. The results indicate that the third-order nanoplate subjected to sinusoidal loading yields smaller values of dimensionless bending than it does while subjected to uniform surface traction. It was also found that by increasing the length to thickness ratio, the value of the dimensionless bending of nanoplate decreases but by increasing the aspect ratio of the plate, this value increases. Furthermore, it was shown that the critical buckling load of the third-order nanoplate under uniaxial loading increases by increasing the ratio of the length scale parameter to the thickness of the nanoplate but it decreases by increasing the length to thickness ratio of the nanoplate. تفاصيل المقالة