Examining the Mixing Plan and the Results of the Plastic Concrete
الموضوعات :Abolfazl Ostovarzijerdi 1 , Akbar Ghanbari 2 , Mohammad Karkon 3
1 - Department of Civil Engineering, Larestan Branch, Islamic Azad University, Larestan, Iran
2 - Department of Civil Engineering, Larestan Branch, Islamic Azad University, Larestan, Iran
3 - Department of Civil Engineering, Larestan Branch, Islamic Azad University, Larestan, Iran
الکلمات المفتاحية: Compressive Strength, cut-off Wall, Elasticity Modulus, Empirical Relations, Plastic Concrete,
ملخص المقالة :
In order to control seepage from the dam, various methods are used to reduce water seepage. One of the methods of reducing the permeability of the water according to its material is building cut-off walls and filling them with plastic concrete materials. In this study, it has been tried to study the mixing plan of the plastic concrete in the main body of the Nargesi dam’s cutoff wall and to determine the results of compressive strength and elasticity modulus of 108 panels of cut-off wall in different ages in this project. Due to the individual concreting of each panel from the cutoff wall, the results of the plastic concrete panels at runtime are somewhat different. Due to the sensitivity of the plastic concrete to the dispersion of the results, considering that the cutoff wall should have a seamless function as well as the sensitivity of the concrete over time, it seems necessary to address this issue in an operational project. The results indicate that the growth rate of elastic modulus in a period of time is less than the growth rate of the compressive strength, and in other words, the plasticity of the concrete is changed less over time.
1.Abbaslou, H., Ghanizadeh, A., & Amlashi, A., T.(2016). The compatibility of bentonite/ sepiolite plastic concrete cut-off wall material. Journal of Sciences, Construction and Building Materials,124,1165-1173.
2.Abbaslou, H., Amlashi, A., T., Azemi, S., & Ghanizadeh, A. (2017). Effects of mixing design and operating time on the compressive and tensile strength of bentonite plastic concrete. Journal of concrete researches, 10 (2) 1123-1137.
3.Aman, A., J., Rohani, A., & Malaki, A. (2013).Investigating the method of drilling and injection in the control of seepage and prevention of sedimentation and cutting-off the soil bedding.(Mastery thesis), Dezful Azad University, Iran.
4.ICOLD. (1995). Filling materials for watertight cut off walls. Bulletin No. 51, International Committee of Large Dams, Paris, France.
5.Pashazadeh, A. & Chekani-Azar, M. (2011).Estimating an Appropriate Plastic Concrete Mixing Design for Cutoff Walls to Control
Leakage under the Earth Dam. Journal of Basic and Applied Scientific Research, 1. 9. 1295-1299.
6.Ata, A.A., Salem, T.N., Elkhawas, N.M. (2015).Properties of soil-bentonite–cement bypass mixture for cutoff walls. Constr. Build. Mater. 93.950–956.doi: 10.1016/j. conbuildmat.2015.05.064
7.García-Siñeriz, J.L., Villar, M.V., Rey, M.,Palacios, B. (2015). Engineered barrier of bentonite pellets and compacted blocks: state after
reaching saturation. Eng.Geol. 192. 33–45.doi:10.1016/j.enggeo.2015.04.002
8.Garvin, S.L., Hayles, C.S. (1999). The chemical compatibility of cement-bentonite cutoff wall material. Constr. Build. Mater. 13. 329–341.doi: 10.1016/s0950-0618(99)00024-0
9.Koch, D. (2002). Bentonites as a basic material for technical base liners and site encapsulation cut-off walls. Appl. Clay Sci. 21.: 1–11.doi:10.1016/s0169-1317(01)00087-4.
10.Maghrebi, M.F., Azad, D., Mousavi, S.H., Saboor Kazeran, H. (2011). Using plastic concrete for canal lining utilization. in: ICID 21st International Congress on Irrigation and Drainage, October,Tehran, Iran.
11.Naderi, M. (2005). Effect of different constituent materials on the properties of plastic concrete. Int.J. Civ. Eng. 3. 1. 10–19.
12.Tahershamsi, A. Bakhtiary, A. Binazadeh, N.(2009) Effects of clay mineral type and content on compressive strength of plastic concrete. Iran. J.Mining Eng. 4 .7. 35–42.
13.Zhang, P., Guan, Q., Li, Q. (2013). Mechanical Properties of Plastic Concrete Containing Bentonite. Engineering and Technology,
5. 4.1317-1322.doi:10.19026/rjaset.5.4867
14.Kazemian, S., Ghareh, S., & Torkanloo, L.(2016). To investigation of plastic concrete bentonite changes on its physical properties.
Journal of Sciences, Procedia Engineering, 145,1080-1087.
15.Gholipour, K. S. (2013). Plastics concrete performance in the implementation of the damping adhesion drain case study of karkhe
dam. (Mastery thesis), Tabriz International Pardis University, Iran.
16Pashazadeh, A., KiaKhosravi, M., & Ganjian, N.(2009). Estimation of plastic concrete mix design for cutoff walls of earthen dams, 14th civil students conference and first international civil students conference, Semnan, Iran.
17.Falaki, A. A. (2014). Study of mechanical properties of plastic concrete containing bentonite using waste rubber powder. (Mastery thesis),Gilan University,Iran.
