Free Vibration Analysis of Non-Uniform Circular Nanoplate
الموضوعات :
M Zarei
1
(Department of Mechanical Engineering, Tarbiat Modares University (TMU), Tehran, Iran)
M Ghalami-Choobar
2
(Department of Mechanical Engineering, Tarbiat Modares University (TMU), Tehran, Iran)
G.H Rahimi
3
(Department of Mechanical Engineering, Tarbiat Modares University (TMU), Tehran, Iran)
G.R Faghani
4
(Department of Mechanical Engineering, Khatam Al Anbia Air Defense University,Tehran, Iran)
الکلمات المفتاحية: Variable thickness plate, Differential transform method, Ritz method, Nonlocal theory, Axisymmetric vibration,
ملخص المقالة :
In this paper, axisymmetric free vibration analysis of a circular Nano-plate having variable thickness was studied. The variation in thickness of plate was considered as a linearly in radial direction. Nonlocal elasticity theory was utilized to take into account size-dependent effects. Ritz functions was utilized to obtain the frequency equations for simply supported and clamped boundary. To verify accuracy of Ritz method, differential transform method (DTM) also used to drive the size dependent natural frequencies of circular nano-plates. The validity of solutions was performed by comparing present results with those of the literature for both classical plate and nano plate. Effect of nonlocal parameter, mode number and taper parameter on the natural frequency are investigated. Results showed that taper parameter has significant effect on the non-dimensional frequency and its effects on the clamped boundary condition is more than simply support.
[1] Sari M. S., Al-Kouz W. G., 2016, Vibration analysis of non-uniform orthotropic Kirchhoff plates resting on elastic foundation based on nonlocal elasticity theory, International Journal of Mechanical Sciences 114: 1-11.
[2] Sakhaee-Pour A., Ahmadian M. T., Vafai A., 2008, Applications of single-layered graphene sheets as mass sensors and atomistic dust detectors, Solid State Communications 145(4): 168-172.
[3] Arash B., Wang Q., 2012, A review on the application of nonlocal elastic models in modeling of carbon nanotubes and graphenes, Computational Materials Science 51(1): 303-313.
[4] Eom K., 2011, Simulations in Nanobiotechnology, CRC Press.
[5] Murmu T., Pradhan S. C., 2009, Vibration analysis of nano-single-layered graphene sheets embedded in elastic medium based on nonlocal elasticity theory, Journal of Applied Physics 105(6): 64319.
[6] Mindlin R. D., Eshel N. N., 1968, On first strain-gradient theories in linear elasticity, International Journal of Solids and Structures 4(1): 109-124.
[7] Mindlin R. D., 1965, Second gradient of strain and surface-tension in linear elasticity, International Journal of Solids and Structures 1(4): 417-438.
[8] Lam D. C. C., Yang F., Chong A. C. M., Wang J., Tong P., 2003, Experiments and theory in strain gradient elasticity, Journal of the Mechanics and Physics of Solids 51(8): 1477-1508.
[9] Ramezani S., 2012, A micro scale geometrically non-linear Timoshenko beam model based on strain gradient elasticity theory, International Journal of Non-Linear Mechanics 47(8): 863-873.
[10] Alibeigloo A., 2011, Free vibration analysis of nano-plate using three-dimensional theory of elasticity, Acta Mechanica 222(1-2): 149.
[11] Şimşek M., 2010, Dynamic analysis of an embedded micro beam carrying a moving micro particle based on the modified couple stress theory, International Journal of Engineering Science 48(12): 1721-1732.
[12] Sahmani S., Ansari R., Gholami R., Darvizeh A., 2013, Dynamic stability analysis of functionally graded higher-order shear deformable microshells based on the modified couple stress elasticity theory, Composites Part B: Engineering 51: 44-53.
[13] Toupin R. A., 1964, Theories of elasticity with couple-stress, Archive for Rational Mechanics and Analysis 17(2): 85-112.
[14] Yang F., Chong A. C. M., Lam D. C. C., Tong P., 2002, Couple stress based strain gradient theory for elasticity, International Journal of Solids and Structures 39(10): 2731-2743.
[15] Eringen A. C., 1983, On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves, Journal of Applied Physics 54(9): 4703-4710
[16] Peddieson J., Buchanan G. R., McNitt R. P., 2003, Application of nonlocal continuum models to nanotechnology, International Journal of Engineering Science 41(3-5): 305-312.
[17] Lu P., Lee H. P., Lu C., Zhang P. Q., 2007, Application of nonlocal beam models for carbon nanotubes, International Journal of Solids and Structures 44(16): 5289-5300.
[18] Reddy J. N., 2007, Nonlocal theories for bending, buckling and vibration of beams, International Journal of Engineering Science 45(2-8): 288-307.
[19] Wang C. M., Zhang Y. Y., He X. Q., 2007, Vibration of nonlocal Timoshenko beams, Nanotechnology 18(10): 105401.
[20] Aghababaei R., Reddy J. N., 2009, Nonlocal third-order shear deformation plate theory with application to bending and vibration of plates, Journal of Sound and Vibration 326(1-2): 277-289.
[21] Aksencer T., Aydogdu M., 2011, Levy type solution method for vibration and buckling of nanoplates using nonlocal elasticity theory, Physica E: Low-Dimensional Systems and Nanostructures 43(4): 954-959.
[22] Ansari R., Sahmani S., Arash B., 2010, Nonlocal plate model for free vibrations of single-layered graphene sheets, Physics Letters A 375(1): 53-62.
[23] Wang Y.-Z., Li F.-M., Kishimoto K., 2010, Scale effects on the longitudinal wave propagation in nanoplates, Physica E: Low-Dimensional Systems and Nanostructures 42 (5): 1356-1360.
[24] Rahmani O., Pedram O., 2014, Analysis and modeling the size effect on vibration of functionally graded nanobeams based on nonlocal Timoshenko beam theory, International Journal of Engineering Science 77: 55-70.
[25] Şimşek M., 2016, Nonlinear free vibration of a functionally graded nanobeam using nonlocal strain gradient theory and a novel Hamiltonian approach, International Journal of Engineering Science 105: 12-27.
[26] Hosseini-Hashemi S., Bedroud M., Nazemnezhad R., 2013, An exact analytical solution for free vibration of functionally graded circular/annular Mindlin nanoplates via nonlocal elasticity, Composite Structures 103: 108-118.
[27] Belkorissat I., Houari M. S. A., Tounsi A., Bedia E. A. A., Mahmoud S. R., 2015, On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model, Steel and Composite Structures 18(4): 1063-1081.
[28] Tornabene F., Fantuzzi N., Bacciocchi M., 2016, The local GDQ method for the natural frequencies of doubly-curved shells with variable thickness: A general formulation, Composites Part B: Engineering 92: 265-289.
[29] Behravan Rad A., Shariyat M., 2016,Thermo-magneto-elasticity analysis of variable thickness annular FGM plates with asymmetric shear and normal loads and non-uniform elastic foundations, Archives of Civil and Mechanical Engineering 16(3): 448-466.
[30] Arefi M., Rahimi G. H., 2012, Three-dimensional multi-field equations of a functionally graded piezoelectric thick shell with variable thickness, curvature and arbitrary nonhomogeneity, Acta Mechanica 223(1): 63-79.
[31] Farajpour A., Shahidi A. R., Mohammadi M., Mahzoon M., 2012, Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics, Composite Structures 94(5): 1605-1615.
[32] Farajpour A., Danesh M., Mohammadi M., 2011, Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics, Physica E: Low-Dimensional Systems and Nanostructures 44(3): 719-727.
[33] Danesh M., Farajpour A., Mohammadi M., 2012, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications 39(1): 23-27.
[34] Şimşek M., 2012, Nonlocal effects in the free longitudinal vibration of axially functionally graded tapered nanorods, Computational Materials Science 61: 257-265.
[35] Efraim E., Eisenberger M., 2007, Exact vibration analysis of variable thickness thick annular isotropic and FGM plates, Journal of Sound and Vibration 299(4-5): 720-738.
[36] Zhou J. K., 1986, Differential Transformation and its Applications for Electrical Circuits, Huazhong University Press, Wuhan, China.
[37] Arikoglu A., Ozkol I., 2010, Vibration analysis of composite sandwich beams with viscoelastic core by using differential transform method, Composite Structures 92(12): 3031-3039.
[38] Mohammadi M., Farajpour A., Goodarzi M., Shehninezhad pour H., 2014, Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium, Computational Materials Science 82: 510-520.
[39] Pradhan S. C., Phadikar J. K., 2009, Small scale effect on vibration of embedded multilayered graphene sheets based on nonlocal continuum models, Physics Letters A 373(11):1062-1069.
[40] Behfar K., Naghdabadi R., 2005, Nanoscale vibrational analysis of a multi-layered graphene sheet embedded in an elastic medium, Composites Science and Technology 65(7-8): 1159-1164.
[41] Mohammadimehr M., Saidi A. R., Ghorbanpour Arani A., Arefmanesh A., Han Q., 2011, Buckling analysis of double-walled carbon nanotubes embedded in an elastic medium under axial compression using non-local Timoshenko beam theory, Proceedings of the IMechE 225(2): 498-506.
[42] Ghorbanpour Arani A., Shiravand A., Rahi M., Kolahchi R., 2012, Nonlocal vibration of coupled DLGS systems embedded on Visco-Pasternak foundation, Physica B: Condensed Matter 407(21): 4123-4131.
[43] Bedroud M., Hosseini-Hashemi S., Nazemnezhad R., 2013, Buckling of circular/annular Mindlin nanoplates via nonlocal elasticity, Acta Mechanica 224(11): 2663-2676.
[44] Ghorbanpour Arani A., Loghman A., Mosallaie Barzoki A.A., Kolahchi R., 2010, Elastic buckling analysis of ring and stringer-stiffened cylindercal shells under general pressure and axial compression via the Ritz method, Journal of Solid Mechanics 2(4): 332-347.
[45] Singh B., Saxena V., 1995, Axisymmetric vibration of a circular plate with double linear variable thickness, Journal of Sound and Vibration 179(5): 879-897.
[46] Mohammadi M., Ghayour M., Farajpour A., 2013, Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model, Composites Part B: Engineering 45(1): 32-42.
[47] Lal R., Ahlawat N., 2015, Buckling and vibration of functionally graded non-uniform circular plates resting on Winkler foundation, Latin American Journal of Solids and Structures 12(12): 2231-2258.
[48] Anjomshoa A., 2013, Application of Ritz functions in buckling analysis of embedded orthotropic circular and elliptical micro/nano-plates based on nonlocal elasticity theory, Meccanica 48(1):1337-1353.
