Evaluation of Buckling and Post Buckling of Variable Thickness Shell Subjected to External Hydrostatic Pressure
الموضوعات :A.R Ghasemi 1 , M.H Hajmohammad 2
1 - Faculty of Mechanical Engineering, Department of Solid Mechanics, University of Kashan, Kashan, Iran
2 - Faculty of Mechanical Engineering, Department of Solid Mechanics, University of Kashan, Kashan, Iran
الکلمات المفتاحية: Variable thickness, External pressure, Buckling, Cylindrical shell, Post buckling,
ملخص المقالة :
Buckling and post buckling of cylindrical shells under hydrostatic pressure is regarded as important issue in structure of submarines. These cylindrical shells have variable thickness due to construction process which effected by pressure of buckling and its destruction. In this paper, effects of changing thickness on buckling and destruction pressure under external hydrostatic pressure of a shell are studied. Results of buckling pressure of cylindrical shell have been obtained with theoretical relations and finite element method. Then, using machining process a sample of cylindrical shell with variable thickness has been produced. Buckling pressure and post buckling of the constructed sample have been obtained with the reservoir under closed-ended hydrostatic pressure. Changes of the test sample size have been considered with closed-ended testing apparatuses which are used for new evaluation of buckling. In this research, results of the pressure have been obtained in terms of the volume change. At the end, results of the finite element method have been compared with results of the analytical solutions and experimental data. Results show that the shell with variable thickness has buckling pressure close to shell bucking pressure with mean thickness.
[1] Ross C., Humphries M., 1993, The buckling of corrugated circular cylinders under uniformexternal pressure, Thin-Walled Structures 17(4): 259-271.
[2] Ghasemi A.R., Hajmohammad M.H., 2010, Optimization of stacking sequence for buckling load using the response surface method and genetic algoritms in laminated composite materials, Journal of Computational Methods in Engineering 31(2): 131-140.
[3] Ghasemi A.R., Hajmohammad M.H., 2015, Minimum-weight design of stiffened shell under hydrostatic pressure by genetic algorithm, Steel and Composite Structures 19(1): 75-92.
[4] Błachut J., 2003, Collapse tests on externally pressurized toroids, Journal of Pressure Vessel Technology 125(1): 91-96.
[5] MacKay J.R., 2007, Experimental Investigation of the Strength of Damaged Pressure Hulls-Phase 1, DRDC Atlantic TM 2006-304.
[6] Slankard R., 2010, Tests of the Elastic Stability of a Ring-Stiffened Cylindrical Shell, Model BR-4 (λ= 1.103), Subjected to Hydrostatic Pressure, David Taylor Model Basin Reports.
[7] Bosman T., Pegg N., Keuning P., 1993, Experimental and numerical determination of the nonlinear overall collapse of imperfect pressure hull compartments, In Proceedings of Warship’93, International Symposium on Naval Submarines.
[8] Bisagni C., 2000, Numerical analysis and experimental correlation of composite shell buckling and post-buckling,Composites Part B: Engineering 31(8): 655-667.
[9] Ross C.T., Sadler J., 2000, Inelastic shell instability of thin-walled circular cylinders under external hydrostatic pressure, Ocean Engineering 27(7): 765-774.
[10] Błachut J., 2002, Buckling of externally pressurised barrelled shells: a comparison of experiment and theory, International Journal of Pressure Vessels and Piping 79(7): 507-517.
[11] MacKay J., Van Keulen F., 2010, A review of external pressure testing techniques for shells including a novel volume-control method, Experimental Mechanics 50(6): 753-772.
[12] Gusic G., Combescure A., Jullien J., 2000, The influence of circumferential thickness variations on the buckling of cylindrical shells under external pressure,Computers & Structures 74(4): 461-477.
[13] Xue J., Fatt H., 2002, Buckling of a non-uniform, long cylindrical shell subjected to external hydrostatic pressure, Engineering Structures 24(8): 1027-1034.
[14] Aksogan O., Sofiyev A., 2002, Dynamic buckling of a cylindrical shell with variable thickness subject to a time-dependent external pressure varying as a power function of time, Journal of Sound and Vibration 254(4): 693-702.
[15] Aghajari S., Abedi K., Showkati H., 2006, Buckling and post-buckling behavior of thin-walled cylindrical steel shells with varying thickness subjected to uniform external pressure,Thin-Walled Structures 44(8): 904-909.
[16] Nguyen H.L.T., Elishakoff I., Nguyen V.T., 2009, Buckling under the external pressure of cylindrical shells with variable thickness, International Journal of Solids and Structures 46(24): 4163-4168.
[17] Lopatin A., Morozov E., 2012, Buckling of a composite cantilever circular cylindrical shell subjected to uniform external lateral pressure,Composite Structures 94(2): 553-562.
[18] Chen L., Rotter J.M., Doerich C., 2011, Buckling of cylindrical shells with stepwisevariable wall thickness under uniform external pressure, Engineering Structures 33(12): 3570-3578.
