Nd:YAG laser processing of thick NiTi wires to locally alter transformation properties towards achieving multiple memory shape memory alloys
الموضوعات :
Amin Alipour
1
,
Mahmoud Kadkhodaei
2
,
Ehsan Foroozmehr
3
1 - Department of Mechanical Engineering,Isfahan University of Technology, Isfahan 8415683111, Iran
2 - Isfahan University of Technology
3 - Department of Mechanical Engineering,Isfahan University of Technology, Isfahan 8415683111, Iran
الکلمات المفتاحية: Multiple Memory Shape Memory Alloy, Nd:YAG Laser, Post-processing, Thick NiTi Wire,
ملخص المقالة :
Every commercial NiTi (Nitinol) Shape Memory Alloy (SMA) has its own transformation temperatures, which may cause limitations in ever-growing demands for the application of these alloys in novel engineering design. Among various methods proposed to achieve multiple functional characteristics, laser processing offers effective solutions in locally controlling the transformation properties of NiTi parts. The current work describes the application of laser technique followed by post processing to locally alter transformation temperatures and impose phase transition for thick NiTi wires. To this end, various laser parameters are applied, and the influences of peak power and pulse width on the functional, microstructural and mechanical properties of laser processed samples are studied. A four-sided laser processing protocol is proposed to process almost the whole cross section of thick Nitinol wires. It is also shown that post-processing heat treatment is required to recover the shape memory properties of as-processed Nitinol specimen. The transformation temperatures of final processed Nitinol wire increase by about 50 °C compared to those of the unprocessed base material.
[1] Khan, M. I., Pequegnat, A., and Zhou, Y. N., Multiple Memory Shape Memory Alloys, Advanced Engineering Materials, Vol. 15, No. 5, 2013, pp. 386-393.
[2] Pequegnat, A., Panton, B., Zhou, Y. N., and Khan, M. I., Local Composition and Microstructure Control for Multiple Pseudoelastic Plateau and Hybrid Self-Biasing Shape Memory Alloys, Materials and Design, Vol. 92, 2016, pp. 802-813.
[3] Miura, F., Mogi, M., and Ohura, Y., Japanese NiTi Alloy Wire: Use of The Direct Electric Resistance Heat Treatment Method, The European Journal of Orthodontics, Vol. 10, No. 1, 1988, pp. 187-191.
[4] Mahmud, A. S., Liu, Y., and Nam, T. H., Design of Functionally Graded NiTi by Heat Treatment, Physica Scripta, T129, 2007, pp. 222.
[5] Sevilla, P., Martorell, F., Libenson, C., Planell, J. A., and Gil, F. J., Laser Welding of NiTi Orthodontic Archwires for Selective Force Application, Journal of Materials Science: Materials in Medicine, Vol. 19, 2008, pp. 525-529.
[6] Kang, S. W., Cho, G. B., Yang, S. Y., Liu, Y., Yang, H., Miyazaki, S., and Nam, T. H., Transformation Temperatures and Shape Memory Characteristics of a Ti–45Ni–5Cu (at%) Alloy Annealed by Joule Heating, Physica Scripta, T139, 2010, pp. 014068.
[7] Tang, C., Huang, W. M., Wang, C. C., and Purnawali, H., The Triple-Shape Memory Effect in NiTi Shape Memory Alloys, Smart Materials and Structures, Vol. 21, No. 8, 2012, pp. 085022.
[8] Shariat, B. S., Liu, Y., and Rio, G., Mathematical Modelling of Pseudoelastic Behaviour of Tapered NiTi Bars, Journal of Alloys and Compounds, Vol. 577, 2013, pp. 76-82.
[9] Shariat, B. S., Liu, Y., and Rio, G., Modelling and Experimental Investigation of Geometrically Graded NiTi Shape Memory Alloys, Smart Materials and Structures, Vol. 22, No. 2, 2013, pp. 025030.
[10] Shariat, B. S., Liu, Y., and Bakhtiari, S., Modelling and Experimental Investigation of Geometrically Graded Shape Memory Alloys with Parallel Design Configuration, Journal of Alloys and Compounds, Vol. 791, 2019, pp. 711-721.
[11] Shariat, B. S., Bakhtiari, S., Yang, H., ansd Liu, Y., Computational and Experimental Analyses of Martensitic Transformation Propagation in Shape Memory Alloys, Journal of Alloys and Compounds, Vol. 806, 2019, pp. 1522-1528.
[12] Shariat, B. S., Bakhtiari, S., Yang, H., and Liu, Y., Controlled Initiation and Propagation of Stress-Induced Martensitic Transformation in Functionally Graded NiTi, Journal of Alloys and Compounds, Vol. 851, 2021, pp. 156103.
[13] Meng, Q., Wu, Z., Bakhtiari, R., Shariat, B. S., Yang, H., Liu, Y., and Nam, T. H., A Unique “Fishtail-Like” Four-Way Shape Memory Effect of Compositionally Graded NiTi, Scripta Materialia, Vol. 127, 2017, pp. 84-87.
[14] Khan, M. I., Pulsed Nd: YAG Laser Processing of Nitinol, Ph.D. Dissertation, Mechanical and Mechatronics Engineering Dept., University of Waterloo, Waterloo, Ontario, Canada, 2011.
[15] Daly, M., Pequegnat, A., Zhou, Y. N., and Khan, M. I., Fabrication of a Novel Laser-Processed NiTi Shape Memory Microgripper with Enhanced Thermomechanical Functionality, Journal of Intelligent Material Systems and Structures, Vol. 24, No. 8, 2013, pp. 984-990.
[16] Panton, B., Zhou, Y. N., and Khan, M. I., A Stabilized, High Stress Self-Biasing Shape Memory Alloy Actuator, Smart Materials and Structures, Vol. 25, No. 9, 2016, pp. 095027.
[17] Zeng, Z., Oliveira, J. P., Ao, S., Zhang, W., Cui, J., Yan, S., and Peng, B., Fabrication and Characterization of a Novel Bionic Manipulator Using a Laser Processed NiTi Shape Memory Alloy, Optics and Laser Technology, Vol. 122, 2020, pp. 105876.
[18] Ge, F., Peng, B., Ke, W., Teshome, F. B., Du, X., and Zeng, Z., Design and Fabrication of Bionic Finger Driven by NiTi Shape Memory Alloys, Proceedings of the Eighth Asia International Symposium on Mechatronics, Springer Nature Singapore, Singapore, 2022, pp. 616-627.
[19] Khan, M. I., Zhou, Y., Effects of Local Phase Conversion on The Tensile Loading of Pulsed Nd: YAG Laser Processed Nitinol, Materials Science and Engineering: A, Vol. 527, No. 23, 2010, pp. 6235-6238.
[20] Michael, A., Pequegnat, A., Wang, J., Zhou, Y. N., and Khan, M. I., Corrosion Performance of Medical Grade NiTi After Laser Processing, Surface and Coatings Technology, Vol. 324, 2017, pp. 478-485.
[21] Mehrpouya, M., Gisario, A., Brotzu, A., and Natali, S., Laser Welding of NiTi Shape Memory Sheets Using a Diode Laser, Optics and Laser Technology, Vol. 108, 2018, pp. 142-149.
[22] Michael, A., Laser Processing and Modelling of Multiple Memory Shape Memory Alloys, Ph.D. Dissertation, Mechanical and Mechatronics Engineering Dept., University of Waterloo, Waterloo, Ontario, Canada, 2018.
[23] Panton, B., Laser Processing, Thermomechanical Processing, and Thermomechanical Fatigue of NiTi Shape Memory Alloys, Ph.D. Dissertation, Mechanical and Mechatronics Engineering Dept., University of Waterloo, Waterloo, Ontario, Canada, 2016.
[24] Pequegnat, A., Novel Laser Based NiTi Shape Memory Alloy Processing Protocol for Medical Device Applications, Ph.D. Dissertation, Mechanical and Mechatronics Engineering Dept., University of Waterloo, Waterloo, Ontario, Canada, 2014.
[25] Shamsolhodaei, A., Zhou, Y. N., and Michael, A., Enhancement of Mechanical and Functional Properties of Welded NiTi by Controlling Nickel Vapourisation, Science and Technology of Welding and Joining, Vol. 24, No. 8, 2019, pp. 706-712.
[26] Shamsolhodaei, A., Razmpoosh, M. H., Maletta, C., Magarò, P., and Zhou, Y. N., A Comprehensive Insight into The Superelasticity Measurement of Laser Welded NiTi Shape Memory Alloys, Materials Letters, Vol. 287, 2021, pp. 129310.
[27] Vâlsan, D. D., Bolocan, V. M., Novac, A., Chilnicean, G. A., and Crăciunescu, C. M., Analysis of Pulsed Laser Spot Effects on NiTi Wires, Solid State Phenomena, Vol. 332, 2022, pp. 59-66.
[28] Ge, F., Zeng, Z., Peng, B., Teshome, F. B., and Chen, L., Study on The Effect of Double-Sided Laser Welding of NiTi Shape Memory Alloys Wire, The International Journal of Advanced Manufacturing Technology, Vol. 120, No. 11-12, 2022, pp. 8201-8209.
[29] Amrollahipour, R., Kadkhodaei, M., Influence of Strain Rate on Stress–Strain Response of Ni–Mn–Ga Ferromagnetic Shape Memory Alloy Single Crystals, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 41, 2017, pp. 265-268.
[30] Jamalimehr, A., Ravanbakhsh, H., Kadkhodaei, M., and Kamrani, M., Investigation of Dog-Bone Geometry for Simple Tensile Test of Pseudoelastic Shape Memory Alloys, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 40, 2016, pp. 337-345.
[31] Brinson, L. C., One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable, Journal of Intelligent Material Systems and Structures, Vol. 4, No. 2, 1993, pp. 229-242.
[32] He, X., Deb Roy, T., and Fuerschbach, P. W., Composition Change of Stainless Steel During Microjoining with Short Laser Pulse, Journal of Applied Physics, Vol. 96, No. 8, 2004, pp. 4547-4555.
[33] Jandaghi, M., Parvin, P., Torkamany, M. J., and Sabbaghzadeh, J., Alloying Element Losses in Pulsed Nd: YAG Laser Welding of Stainless Steel 316, Journal of Physics D: Applied Physics, Vol. 41, No. 23, 2008, pp. 235503.
[34] Sadiq, H., Wong, M. B., Al-Mahaidi, R., and Zhao, X. L., The Effects of Heat Treatment on The Recovery Stresses of Shape Memory Alloys, Smart Materials and Structures, Vol. 19, No. 3, 2010, pp. 035021.
