Design and Analysis of Bicycle Helmet Made of PETg and ABS with Honeycomb Structure Against External Impacts using Abaqus Software
الموضوعات :
sajjad pakzad
1
(Faculty of Design, Tabriz Islamic Art University, Iran)
ahad shah hoseini
2
(Faculty of Design, Tabriz Islamic Art University, Iran)
Maryam Dehghani
3
(M.Sc. Student, Faculty of Design, Tabriz Islamic Art University, Iran)
amir bahador khalkhali
4
(M.Sc. Student, Faculty of Design, Tabriz Islamic Art University, Iran)
الکلمات المفتاحية: Stress Analysis, Honeycomb, Bicycle Helmet, ABAQUS,
ملخص المقالة :
The bicycle helmet has a significant role in reducing and preventing impact because of reducing the deceleration of the skull, spreading the area over which the forces of the impact reach them and preventing direct contact between the skull and the impacting object. Honeycomb structure, due to its elastic properties, extends the energy absorption time of the whole structure and also increases the ability of the whole structure to absorb energy. Therefore, it can be used in the liner designing of a helmet to reduce velocity, energy, and acceleration in impacts. In this paper, intending to identify the minimum stress transmitted to the helmet during an impact, we used Rhino software to model a helmet with honeycomb liner and outer shell and then analyzed it in Abaqus software. Due to the fact that the size of various parts of the head is different in people, so for more comfort and safety, the use of customized-helmet is emphasized. To design and make a customized-helmet, the materials used in designing the helmet are ABS and PETg filaments, which can be used in 3D printing. These two materials have been analyzed with four compositions for the liner and the shell of the helmet. The results show that the best combination of the helmet with Minimum stress transmission and appropriate plastic strain due to impact is the helmet case with honeycomb liner of PETg and a shell made of ABS.
[1] Hansen, K., Dau, N., Feist, F., Deck, C., Willinger, R., Madey, S. M., and Bottlang, M., Angular Impact Mitigation System for Bicycle Helmets to Reduce Head Acceleration and Risk of Traumatic Brain Injury, Accident Analysis and Prevention, Vol. 59, 2013, pp. 109–117.
[2] Connor, T. A., Meng, S., and Zouzias, D., Current Standards for Sports and Automotive Helmets: A Review, European Union’s Horizon 2020 Research and Innovation Program, 2016, pp. 1–42.
[3] Hoye, A., Bicycle Helmets – to Wear or Not to Wear? A Meta-Analyses of the Effects of Bicycle Helmets On Injuries, Accident Analysis and Prevention, Vol. 117, 2018, pp. 85–97.
[4] Liu, H., Li, Z., and Zheng, L., Rapid Preliminary Helmet Shell Design Based On Three-Dimensional Anthropometric Head Data, Journal of Engineering Design, Vol. 19, No. 1, 2008, pp. 45–54.
[5] Fahlstedt, M., Halldin, P., and Kleiven, S., The Protective Effect of a Helmet in Three Bicycle Accidents - A Finite Element Study, Accident Analysis and Prevention, Vol. 91, 2016, pp. 135–143.
[6] H. Dickinson, H., Towner, J.,Burkes, M., Hayes, M., Dowswell, T., and Towner, E., Bicycle Helmets - A Review of Their Effectiveness: A Critical Review of the Literature, Publication of Department for Transport: London, No. 30, 2020, pp. 96.
[7] Bland, M., McNally, C., and Rowson, S., Differences in Impact Performance of Bicycle Helmets During Oblique Impacts, Journal of Biomechanical Engineering, Vol. 140, No. 9, 2018.
[8] Teng, T. L., Liang, C. C., and Nguyen, V. H., Development and Validation of the Finite Element Model of Helmet Impact Test, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, Vol. 227, No. 1, 2012, pp. 82–88.
[9] 16 CFR Part 1203, Safety Standard for Bicycle Helmets, Consumer Product Safety Commission, Vol. 63, No. 46, 1998, pp. 11711–11747.
[10] Mills, N. J., Gilchrist, A., Bicycle Helmet Design, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 220, No. 4, 2006, pp. 167–180.
[11] Qi, D., Lu, Q., He, C., Li, Y., Wu, W., and Xiao, D., Impact Energy Absorption of Functionally Graded Chiral Honeycomb Structures, Extreme Mechanics Letters, Vol. 32, 2019.
[12] Caccese, V., Ferguson, J. R., and Edgecomb, M. A., Optimal Design of Honeycomb Material Used to Mitigate the Head Impact, Composite Structures, Vol. 100, 2013, pp. 404–412.
[13] Bliven, E., Rouhier, A., Tsai, S., Willinger, R., Bourdet, N., Deck, C, M., Madey, S. M., and Bottlang, M., Evaluation of a Novel Bicycle Helmet Concept in Oblique Impact Testing, Accident Analysis and Prevention, Vol. 124, 2019, pp. 58–65.
[14] Bland, M. L., McNally, C., Zuby, D. S., Mueller, B. C., and Rowson, S., Development of the STAR Evaluation System for Assessing Bicycle Helmet Protective Performance, Annals of Biomedical Engineering, Vol. 48, No. 1,2020, pp. 47–57.
[15] Bourdet. N., Deck, C., Carreira, R. P., Willinger, R., Head Impact Conditions in The Case of Cyclist Falls, Proceedings of the Institution of Mechanical Engineers, Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, Vol. 226, 2012, pp. 282-289.
[16] Ching, R. P., Thompson, D. C., Thompson, R. S., Thomas, D. J., Chilcott, W. C., and Rivara, F. P., Damage to Bicycle Helmets Involved with Crashes, Accident Analysis and Prevention, Vol. 29, 1997, pp. 555–562.
[17] McIntosh, A. S., Dowdell, B., and Svensson, N., Pedal Cycle Helmet Effectiveness: A Field Study of Pedal Cycle Accidents, Accident Analysis and Prevention, Vol. 30, 1998, pp. 161–168.
[18] Williams, M., The Protective Performance of Bicyclists 'Helmets in Accidents, Accident Analysis and Prevention, Vol. 23, 1991, pp. 119–131.
[19] Milne, G., Deck, C., Carreira, R. P., Allinne, Q., and Willinger, R., Development and Validation of a Bicycle Helmet: Assessment of Head Injury Risk Under Standard Impact Conditions, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 15, 2012, pp. 309–310.
[20] Mills, N. J., Gilchrist, A., Oblique Impact Testing of Bicycle Helmets, International Journal of Impact Engineering, Vol. 35, No. 9, 2008, pp. 1075–1086.
[21] DeMarco, A. L., Chimich, D. D., Bonin, S. J., and Siegmund, G. P., Impact Performance of Certified Bicycle Helmets Below, On and Above the Test Line, Annals of Biomedical Engineering, Vol. 48, No. 1, 2020, pp. 58–67.
[22] Kholoosi, F., Galehdari, S. A., Design and Analysis of a Helmet Equipped with Graded Honeycomb Structure under Impact of Flat and Hemi-Spherical Anvils, Procedia Engineering, Vol. 173, 2017, pp. 1299–1306.
[23] Anil Kumar, K., Babu Suresh, Y., Design and Analysis of Industrial Helmet, International Journal of Computational Engineering Research, Vol. 3, No. 12, 2013, pp. 48–58.
[24] Divakar, H., Nagaraja. R., Puttaswamaiah, S. and Guruprasad, H. L., Mechanical Characterization of Thermoplastic ABS /Glass Fibre Reinforced Polymer Matrix Composites, International Journal of Engineering Research and, Vol. V4, No. 05, 2015.
