A Novel Approach for Optimization of Vehicle Noise Insulators
الموضوعات :
S.Hamed Tabatabaei
1
(Department of Mechanical Engineering,
Islamic Azad University, South Tehran Branch, Iran)
Saeed Moradi Haghighi
2
(Department of Mechanical Engineering,
Tarbiat Modares University, Tehran, Iran)
Kasra Ghasemian
3
(Department of Mechanical Engineering,
University of Science and Technology, Tehran, Iran)
Amir Hossein Kiani
4
(Department of Mechanical Engineering,
University of Science and Technology, Tehran, Iran)
الکلمات المفتاحية: Genetic Algorithm, Sound Package, Sea, Micro-Perforated, Absorber, Optimization,
ملخص المقالة :
Development of effective sound insulators for interior noise reduction of vehicle cabin is an essential phase of the process of vehicle manufacturing. One of the main issues in this process is the space limitations for packaging the firewall insulators. In this paper, a new approach in sound insulator optimization will be used, in which the space limitation has been considered. The insulator consists of a Micro-Perforated Plate (MPP) and a limp porous layer. MPP layer is suitable for use in vehicles due to low weight and flexibility in design. The main goal of this study was to reach better performance and less weight and volume in a specific thickness. So, a mathematical model of this sound package has been developed and validated by experimental data and SEA software. The simulation results illustrate the high performance of the optimized sound package in practical application, particularly at higher frequencies. On the other hand, the weight and thickness of the optimized sound package are less than the conventional sound packages. These qualities provide an optimized design that has better compatibility with the automotive industry.
[1] Pang, J., Noise and Vibration Control in Automotive Bodies, First ed, John Wiley & Sons, Inc., Hoboken, New Jersey, 2018, pp. 217.
[2] Duval, A., Rondeau, J. F., Bischoff, L., Deshayes, G., and Dejaeger, L., Generalized Lightweight Concepts: Improving the Acoustic Performance of Less than 2500 g/m2 Insulators, SAE Technical Paper No. 2009-01-2136, 2009.
[3] Zhang, J., Zhu, G., Zhang, X., Liu, H., and Liu, C., The Vehicle NVH Development and Engineering Application of the Lightweight Sound Package, in Proceedings of SAE-China Congress 2014: Selected Papers, 2015, pp. 291-300.
[4] Li, C., Cazzolato, B., and Zander, A., Acoustic Impedance of Micro Perforated Membranes: Velocity Continuity Condition at the Perforation Boundary, The Journal of the Acoustical Society of America, Vol. 139, No. 1, 2016, pp. 93-103.
[5] Shin, H., Bolton, J. S., The Identification of Minimum-Weight Sound Packages, Noise Control Engineering Journal, Vol. 66, No. 6, 2018, pp. 523-540.
[6] Parrett, A. V.,et al., Application of Micro-Perforated Composite Acoustic Material to a Vehicle Dash Mat, SAE Technical Paper No.2011-0148-7191, 2011.
[7] Li, L., Gang, X., Liu, Y., Zhang, X., and Zhang, F., Numerical Simulations and Experiments on Thermal Viscous Power Dissipation of Perforated Plates, AIP Advances, Vol. 8, No. 10, 2018, pp. 105-221.
[8] Liu, Z., Zhan, J., Fard, M., and Davy, J. L., Acoustic Measurement of a 3d Printed Micro-Perforated Panel Combined with a Porous Material, Measurement, Vol. 104, 2017, pp. 233-236.
[9] Du, A. M., Wei, N., and Shao, J. W., Optimization of Sound Package for Automotive Dash Panel, Applied Mechanics and Materials 2014 (Vol. 670, pp. 1098-1101). Trans Tech Publications Ltd.
[10] Seppi, M., Castagnetti, C., and Ravinath, V., Optimisation of a Hybrid Sound Package with Statistical Energy Analysis, ATZ Worldwide 114, No. 9, 2012, pp. 44-48.
[11] Jain, S., Shravage, P., Joshi, M., and Karanth, N., Acoustical design of Vehicle Dash Insulator, SAE Technical Paper No. 2011-0148-7191, 2011.
[12] Jain, S., Shravage, P., and Karanth, N., Sound Package Materials for Vehicle Interior NVH Refinement, Automotive Material Conference, 2010.
[13] Marzbanrad, J., Hafezian, M., and Mozaffarikhah, M., Automotive Interior Cabin Noise Analysis and Optimization Using SEA and RSM, International Journal of Automotive Engineering, Vol. 9, No. 1, 2019, pp. 2887-2894.
[14] Heutschi, K., Lecture Notes on Acoustics I, Institute for Signal- and Informationprocessing, ISI Swiss Federal Institute of Technology, Zurich, Swiss, 2013, chaps. 1.
[15] Allard, J., Atalla, N., Propagation of Sound in Porous Media: Modelling Sound Absorbing Materials, 2nd edition, John Wiley & Sons, Hoboken, New Jersey, 2009, pp. 2-3.
[16] Chevillotte, F., Jaouen, L., and Bécot, F. X., On the Modeling of Visco-Thermal Dissipations in Heterogeneous Porous Media, The Journal of the Acoustical Society of America, Vol. 138, No. 6, 2015, pp. 3922-3929.
[17] Liu, Z., Zhan, J., Fard, M., and Davy, J. L., Acoustic Properties of Multilayer Sound Absorbers with a 3D Printed Micro-Perforated Panel, Applied Acoustics, Vol. 121, 2017, pp. 25-32.
[18] Zwikker, C., Kosten, C. W., Sound Absorbing Materials, Elsevier Publishing Company, Amsterdam, 1949.
[19] Villamil, H. R., Acoustic Properties of Microperforated Panels and Their Optimization by Simulated Annealing, Ph. D. Dissertation, Universidad Politecnica de Madrid, Madrid, Spain, 2012.
[20] Dah-You, M., General Theory and Design of Microperforated-Panel Absorbers, Chinese Journal,No. 3, 1997, pp. 03.
[21] Lee, D., Kwon, Y., Estimation of the Absorption Performance of Multiple Layer Perforated Panel Systems by Transfer Matrix Method, Journal of Sound and Vibration, Vol. 278, No. 4-5, 2004, pp. 847-86.
[22] Liu, Z., Zhan, J., Fard, M., and Davy, J. L., Acoustic Measurement of a 3D Printed Micro-Perforated Panel Combined with a Porous Material, Measurement, Vol. 104, 2017, pp. 233-236.
[23] Musser, C. T., Manning, J. E., and Peng, G. C., Predicting Vehicle Interior Sound with Statistical Energy Analysis, Sound & Vibration, Vol. 46, No. 12, 2012, pp. 8-14.
[24] Egab, L., Wang, X., Fard, M., and Jazar, R., Prediction of Interior Trim Sound Absorption Using Statistical Energy Analysis, 25th International Conference on Noise and Vibration engineering, Vol. 5, 2012, pp. 3881-3890.
[25] Golota, A., Acoustic Simulation of Power Unit Encapsulation for Construction and Mining Applications, Master's Thesis, chalmers university of technology, Gothenburg, Sweden, 2012.
[26] Pan, J., Semeniuk, B., Ahlquist, J., and Caprioli, D., Optimal Sound Package Design Using Statistical Energy Analysis, SAE Technical Paper No, 0148-7191, 2003.
[27] Yu ,Z., Raveendra, S. T., Mo, H., and Mollo, C., Development of General SEA Templates for Four-Door Passenger Cars, SAE Transactions, 2003, pp. 1860-1870
[28] Edathute, S., Nalla, T., Bhangale, R., and Kumbhar, M., Application of Dual Density Light Weight Dash Acoustic Insulators in SUVs, SAE Technical Paper No. 0148-7191, 2009.
