Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method
الموضوعات :
H. Asadollahi-Yazdi
1
(Department of Mechanical and Aerospace Engineering,
Science and Research Branch, Islamic Azad University, Tehran, Iran)
M. Shariati
2
(Department of Mechanical Engineering,
Ferdowsi University of Mashhad, Mashhad, Iran)
A. Imam
3
(Department of Mechanical and Aerospace Engineering,
Science and Research Branch, Islamic Azad University, Tehran, Iran)
M. Ghatee
4
(Department of Materials Science and Engineering,
Shahrood University of Technology, Shahrood, Iran)
الکلمات المفتاحية: Spray method, nanocomposites, POM, Graphene, Taguchi,
ملخص المقالة :
: In this study, a spray approach is applied to produce POM/graphene nanocomposite using a hot press mold and an automatic spray. The layer-by-layer spray method is used to fabricate these composites with different Wt. % of graphene particles, spray pressure, nozzle-to-mold distance at different temperatures. Taguchi approach as a popular method for Designing of Experiments (DOE) was used for statistical control of the parameters influenced by the synthesis process. The main idea in the present study was to determine the optimal characteristics by investigation of interaction effects in the manufacturing of POM/graphene nanocomposite. Thus, the optimal values obtained were 180oC for the mold temperature, 0.55m for the nozzle-to-mold distance and 3*105 Pa for the spray pressure. Finally, the experimental procedure done, showed that in samples fabricated by 1.8 Wt. % of graphene, the fracture strain decreased about 30% and the UTS and elastic modulus improved 40% and 60%, respectively.
[1] Tuttle, M. E., “Structural Analysis of Polymeric Composite Materialsˮ, 2nd ed., CRC Press, New York, 2004, chap 2.
[2] Prashantha, K., Soulestin, J., Lacrampe, M., Lafranche, E., Krawczak, P., Dupin, G., and Claes, M., “Taguchi Analysis of Shrinkage and Warpage of Injection-moulded Polypropylene/Multiwall Carbon Nanotubes Nanocomposites”, Express Polym Lett, Vol. 3, No. 10, 2009, pp. 630-638.
[3] Mirmohseni, A., Zavareh, S., “Preparation and Characterization of an Epoxy Nanocomposite Toughened by a Combination of Thermoplastic, Layered and Particulate Nano-Fillers”, Materials & Design, Vol. 31, No. 6, 2010, pp. 2699-2706.
[4] Rostamiyan, Y., Fereidoon, A., Mashhadzadeh, A. H., and Khalili, M., “Augmenting Epoxy Toughness by Combination of Both Thermoplastic and Nanolayered Materials and using Artificial Intelligence Techniques for Modeling and Optimization”, Journal of Polymer Research, Vol. 20, No. 6, 2013, pp. 1-11.
[5] Khanlou, H. M., Sadollah, A., Ang, B. C., Kim, J. H., Talebian, S., and Ghadimi, A. “Prediction and Optimization of Electrospinning Parameters for Polymethyl Methacrylate Nanofiber Fabrication using Response Surface Methodology and Artificial Neural Networks”, Neural Computing and Applications, Vol. 25, No. 3-4, 2014, pp. 767-777.
[6] Azadi, R., Rostamiyan, Y., “Experimental and Analytical Study of Buckling Strength of New Quaternary Hybrid Nanocomposite using Taguchi Method for Optimization”, Construction and Building Materials, Vol. 88, 2015, pp. 212-224.
[7] Mashhadzadeh, A., Fereidoon, Y., Rostamiyan, M., Khatibi, M., Mohammadi, M. R., and Nikjoo, A., “Using Taguchi Approach for Optimizing Mechanical Properties of Hybrid Laminates Nanocomposite”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,. 2016, DOI:10.1177/0954408916637379.
[8] Parvaneh, V., Shariati, M., “Experimental Analysis of the Low Cycle Fatigue of a Spray-Coated Layered Multi-Walled Carbon Nanotubes/Polyvinyl Chloride Nanocomposite”, Journal of Composite Materials, Vol. 50, No. 11, 2016, pp. 1555-1562.
[9] Asadollahi-yazdi, H., Shariati, M., Imam, A., and Ghatee, M., “Investigating the Mechanical Properties of Layered Graphene/Polyoxymethylene Nanocomposites Prepared by the Spray Method”, Journal of Composite Materials, 2016, DOI. 10.1177/0021998316681188.
[10] Roy, R. K., “Design of Experiments using the Taguchi Approach: 16 Steps to Product and Process Improvement, 2nd ed.,Wiley, New York, 2001, chap 1.
[11] Roy, R. K., “A Primer on the Taguchi Methodˮ, 2nd ed., Society of Manufacturing Engineers, Michigan, 2010, chap 6.
[12] Parvaneh, V., Shariati, M., Nezakati, A., “Statistical Analysis of the Parameters Influencing the Mechanical Properties of Layered MWCNTs/PVC Nanocomposites”, Journal of Composite Materials, Vol. 6, No. 5, 2015, pp. 509-516.
