An Experimental Study on Full Toroidal Continuously Variable Transmission System
الموضوعات :
1 -
الکلمات المفتاحية:
ملخص المقالة :
Abstract: A continuously variable transmission (CVT) is a transmission which may change step less by way of an infinite variety of effective gear ratios between maximum and minimum values. This contrasts with different mechanical transmissions that solely permit just a few different distinct gear ratios to be selected. Continuously variable transmissions (CVTs) are mechanical devices that allow a continuous variation of the output velocity by adjusting its geometrical configuration. This offers several advantages over traditional transmissions such as better fuel efficiency, quieter operation, and a lower mass. Current efforts to reduce the vehicles, fuel consumption in order to protect the environment and save fuel have seen a recent resurgence in CVT research, especially in the automotive industry. The torque of the continuously variable transmission system with friction drive mechanism is transmitted by contacting roller with input and output disks. For the higher transmitted torque, it is necessary to apply large load in order to get higher friction force, which in turn generates severe high stress on the contact surfaces of roller and disks. The toroidal type CVT system has simple component arrays that have three contact points between roller and each input or output disk to get the torque transmitted This work documents a successfully developed experimental model of a toroidal continuously variable transmission (CVT) by adjusting its geometrical configuration of CVT design and compared the experimental results of speed, torque and power delivered at the output disc with those obtained by a theoretical.