Comparing the Performance of Composite Polymer Structure and Single Polymer Material by Manufacturing Artificial Hand using 3D Printing Method
الموضوعات :Abbas Savabpour 1 , Ali Pourkamali Anaraki 2 , Javad Kad Khodapour 3
1 - PhD Student, Faculty of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
2 - Associate Professor, Faculty of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
3 - Professor, Faculty of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
الکلمات المفتاحية: 3D Printer, Composite Material, Artificial Hand, ABS, TPU ,
ملخص المقالة :
A composite structure is a non-uniform solid that consists of two or more different materials with different kinds mechanically bonded together. Compared to their components, these structures have superior properties (such as high strength and flexibility, incredible softness, etc.). They can be designed according to the needs, and different mechanical properties can be achieved. In this article, to prove the superiority of composite structures over single material structures, two products, including an articulated hand (single material) and a flexible hand (composite material), have been designed and manufactured using 3D printing technology (incremental layering). To investigate the performance of these two hands, the bending angles of the fingers of each hand in the open and closed state at different times were measured by the protractor. They were eventually compared, analyzed, and evaluated. The results of this study indicate that due to the use of composite material, the flexi fingers can easily bend and straighten up to 100 degrees in 2.8 seconds. Still, the articulated hand repeats this movement in 3.3 seconds. These results indicate that the flexi hand repeats the movement of the human hand faster due to its high flexibility.
[1] Osborn L., I. M. and Thakor N. V. 2020. Sensing and Control for Prosthetic Hands in Clinical and Research Applications. Wearable Robotics. Edition 1.
[2] Zeb Gul, J, Sajid, M., Rehman, M. M., Siddiqui, U. Gh., Shah, I., Kim, K.-H., Lee, J.-W. and Choi, K. H. 2018. 3D printing for soft robotics – a review. Science and Technology of Advanced Materials. 19(1): 243-262. doi: 10.1080/14686996.2018.1431862.
[3] Rosa, F., Bordegoni, M., Dentelli, A., Sanzone, A. and Sotgiu, A. 2017. Print-in-place of interconnected deformable and rigid parts of articulated systems. 27th International Conference on Flexible Automation and Intelligent Manufacturing. Modena, Italy.
[4] Soreni-Harari, M., S. P. R., McCue C., Moreno, K. and Bergbreiter S. 2019. Multimaterial 3D printing for microrobotic mechanisms. Soft Robotics. 7(1): 59-67. doi: 10.1089/soro.2018.0147.
[5] Ananthanarayanan, A., Bussemer, F., Gupta, S. K. and Desai, J. P. 2014. Fabrication of highly articulated miniature snake robot structures using in-mold assembly of compliant joints. Experimental Robotics, Springer Tracts in Advanced Robotics. 79: 799-809. doi: 10.1007/978-3-642-28572-1_55.
[6] Yang, Y., Chen, Y., Li, Y., Michael, Chen, Z.Q. and Wei, Y. 2017. Bioinspired robotic fingers based on pneumatic actuator and 3D printing of smart material. Soft Robotics. 4(2): 147-162. doi: 10.1089/soro.2016.0034.
[7] Alves, S, Babcinschi, M, Silva, A, Neto, D, Fonseca, D. and Neto, P. 2023. Integrated design fabrication and control of a bioinspired multimaterial soft robotic hand. Cyborg and Bionic Systems. 4:0051. doi:10.34133/cbsystems.0051.
[8] Yap, Y. L., Sing, S. L. and Yeong, W. Y. 2019. A review of 3D printing processes and materials for soft robotics. Rapid Prototyping Journal 26(8): 1345-1361. doi: 10.1108/RPJ 11 2019 0302.
[9] Mutlu, R., Alici, G., Panhuis, M. and Spinks, G. M. 2016. 3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers. Soft Robotics. 3(3): 120-133. doi:10.1089/soro.2016.0026.
[10] Torrealba, R. R., Udelman, S. B., Rivas, A. J. and Carvalho, F. J. 2017. A start-up project to create customised 3D-printed hand prostheses affordable in developing countries. Technical report.
[11] Zhang, H., Anantharajan, S. K., Chen, F., Fuh, J. Y. H. and Wang, M. Y. 2019. Topology optimized multimaterial soft fingers for applications on grippers, rehabilitation and artificial hands. IEEE/ASME Transactions on Mechatronics. 24(1): 120-131. doi: 10.1109/TMECH.2018.2874067.
[12] Baron, J., Hazubski, S. and Otte, A. 2020. 3D Multi-Material Printing of an Anthropomorphic, Personalized Replacement Hand for Use in Neuroprosthetics Using 3D Scanning and Computer-Aided Design: First Proof-of-Technical-Concept Study. Prosthesis. 2(4): 362-370. doi: 10.3390/prosthesis2040034.
[13] Ntagios, M., Nassar, H., Pullanchiyodan, A., Navaraj, W. T. and Dahiya, R. 2020. Robotic Hands with Intrinsic Tactile Sensing via 3D Printed Soft Pressure Sensors. Advanced Intelligent Systems. 2(6): 1900080. doi: 10.1002/aisy.201900080.
[14] Olewi, Hussein H. and Abdulmajeed, Wael R. 2018. Controlling Artificial Hand Using Smart Glove. International Journal of Applied Engineering Research. 13(7): 5097-5102.
[15] Fonseca, G., Nunes-Pereira, J. and Silva, A. P. 2023. 3D Printed Robotic Hand with Piezoresistive Touch Capability. Applied Sciences. 13(14): 8002. doi:10.3390/app13148002.
[16] Cuellar, J. S., Smit, G., Breedveld, P., Zadpoor, A. A. and Plettenburg, D. 2019. Functional evaluation of a nonassembly 3D-printed hand prosthesis. Journal of Engineering in Medicine. 233(11): 1122–1131. doi: 10.1177/0954411919874523.
[17] Babu, D., Ghafar, N., Ravindran, Farag, M., Jabbar, W. A. 2023. 3D Printed Prosthetic Robot Arm with Grasping Detection System for Children. Advanced Science Engineering Information Technology. 13(1): 226-234. doi:10.18517/ijaseit.13.1.16547.
[18] Alkhatib, F., Mahdi, E.and Cabibihan, J-J. 2019. Design and analysis of flexible joints for a robust 3D printed prosthetic hand. IEEE 16th International Conference on Rehabilitation Robotics (ICORR). Toronto, Canada.
[19] Salmana, S., Yuanhuia, C., Imranb, Z., Fenghuac, L., Lijianc, W. and Weipinga, W. 2020. A Wireless-controlled 3D printed Robotic Hand Motion System with Flex Force Sensors. Sensors and Actuators A. 309 (22): 112004. doi:10.1016/j.sna.2020.112004.
[20] Shamaas, M. 2022. Introduction to 3D printer. doi:10.13140/RG.2.2.36091.18729.
[21] Shabana, R. V. N. S., Sarojini, J., Vikram, K. and Lakshmi, V.V.K. 2019. Evaluating the mechanical properties of commonly used 3d printed ABS and PLA polymers with multi layered polymers. International Journal of Engineering and Advanced Technology 8(6): 2351-2356. doi:10.35940/ijeat.F8646.088619.24.
