Study of the Effects of Various Boundary Conditions on the Acoustical Treatments of Double-Panel Structures Lined with Poroelatic Materials
الموضوعات : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیک
محمدحسن شجاعی فرد
1
(استاد، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران.)
روح ا... طالبی
2
(استادیار، دانشکده مهندسی خودرو، دانشگاه علم و صنعت ایران.)
رضا احمدی
3
(دانشجوی دکتری، دانشکده مهندسی خودرو، دانشگاه علم و صنعت ایران)
مائده امیرپور ملا
4
(کارشناس ارشد، دانشکده مهندسی خودرو، دانشگاه علم و صنعت ایران.)
الکلمات المفتاحية: Double-panel structures, Poroelastic layer, Transmission loss, Boundary Condition, Statistical Energy Analysis(SEA),
ملخص المقالة :
In this paper, the acoustical treatment of double-panel structures lined with poroelatic materials is predicted using analytical method in order to study the effective usage of the various boundary conditions of porous layer and to identify the effective parameters on the transmission loss of the multilayer systems. Therefore, inertia and viscous coupling along with thermal and elastic coupling should be considered in transfer stress dynamic and stress-strain relationships for an elastic porous material based on Biot theory. Then, the governing equations of the wave propagation in an elastic porous material are briefly considered and the general forms for the stresses and displacements within the porous material are given. Applying various boundary conditions and solving these equations with Matlab code simultaneously, the transmission loss of these structures is calculated. The results from the analytical method are compared with the SEA madel and the experimental data with excellent agreement is observed. Finally, the influence of effective parameters of this structure with various boundary conditions on the transmission loss of the multilayer systems is studied. The results have been shown that the transmission loss of double-panel structures lined with a layer of porous material can depend critically on the method of mounting the porous layer to the facing panel.
[1] Bolton J. S., Shiau N. M. and Kang Y. J., , Sound Transmission Through Multi-Panel Structures Lined with Elastic porous Materials, J. of Sound and Vibration, 191(3-4), 1996, pp. 317-347.
[2] Fahy F. J., , Foundation of Engineering Acoustics, Academic Press, 2001.
[3] Rayleigh J. W. S., The Theory of Sound, Vol. II, Art. 351, Dover Publication, New York, 1945.
[4] Zwikker C. and Kosten C. W., Sound Absorbing Materials, Elsevier Press, Amsterdam, 1949.
[5] Biot M. A., , Theory of Propagation of Elastic Waves in a Fluid-Structural porous Solid I, Low Frequency Range, J. of Acoustical Society of America, Vol. 28, No. 2, 1956, pp. 168-178.
[6] Biot M. A., Theory of Propagation of Elastic Waves in a Fluid-Structural porous Solid II, High Frequency Range, J. of Acoustical Society of America, Vol. 28, No. 2, 1956, pp. 179-191.
[7] Atalla N., Panneton R. and Deberdue P., A Mixed Displacement-Pressure Formulation for Poroelastic Materials, J. of Acoustical Society of America, Vol. 104, No. 3, 1998, pp. 1444-1452.
[8] Segard F. C., Atalla N. and Nicolas J., A Numerical Model for the Low Frequency Diffuse Field Sound Transmission Loss of Double-wall Sound Barriers with Elastic Porous Linings, J. of Acoustical Society of America, Vol. 108, No. 6, 2000, pp. 2865-2872.
[9] Bolton J. S. and Green E. R., Normal incidence sound transmission through double-panel systems lined with relatively stiff, reticulated polyurethane foam, Applied Acoustics. 39, 1993, pp. 23–51.
[10] Bolton J. S. and Kang Y. J., Elastic porous materials for sound absorption and transmission control, Proceedings of SAE Noise and Vibration Conference, 971878, 1997, pp. 77-91.
[11] Bolton J. S., Heng-Yi Lai, katragadda S. and Alexander J. H., Layered Fibrous Treatment for a Sound Absorption and Transmission Control, SAE 971878, 1997, pp. 2576-2590.
[12] Tadeu A., Antonio J., Mateus D., Sound insulation provided by single and double panel walls, a comparison of analytical solutions versus experimental results, Applied Acoustics, 65, 2004, pp. 15-29.
[13] Tanneau O., Casimir J. B. and Lamary P., Optimization of multilayered panels with poroelastic components for an acoustical transmission objective, J. of Acoustical Society of America, 120 (3), 2006, pp. 1227-1238.
[14] Ghosh A.K., Williams A.D., Zucker J.M., Mathews J.L., Spinhirne N. , An Experimental Investigation into the Acoustic Characteristics of Fluid-filled Porous Structures-A Simplified Model of the Human Skull Cancellous Structure, Experimental Mechanics, 48, 2008, pp. 139-152.
[15] Xin, F.X., Lu, T.J., Transmission loss of orthogonally rib-stiffened double-panel structures with cavity absorption, J. of Acoustical Society of America, 129, 2011, pp. 1919-1934.
[16] Daneshjou K., Ramezani H., Talebitooti R., Wave transmission through laminated composite double-walled cylindrical shell lined with porous materials, Applied Mathematics and Mechanics, 32(6), 2011, pp. 701–718.
[17] Allard J.F., Propagation of sound in porous media: modeling sound absorbing materials, Elsevier Science Publishers LTD., 1993.
[18] Kang Y. J. & Bolton J. S., A finite element model for sound transmission through foam-lined double-panel structures, J. of Acoustical Society of America, 99, 1996, pp. 2755–2765.
[19] Lee J.H. and Kim J., Simplified method to solve sound transmission through structures lined with porous material, J. of Acoustical Society of America, 110, 2001, pp. 2282-2294.
[20] A. D. Pierce, 1981, Acoustics, New York: McGraw Hill.
[21] Mulholland K. A., Parbrook H. D. and Cummings A., The Transmission Loss of Double Panels, J. Sound and Vib., 6, 1967, pp. 324–334.
[22] AutoSEA2 User's Guide, ESI Group., July 2004.
