A Study on the Adsorption of Cadmium(II) from Aqueous Solution onto Activated Carbon Originated from Bombax ceiba Fruit Shell

الموضوعات :

Rumpa Kundu ¹ , Chandramoni Biswas ² , Jamil Ahmed ³ , Jannatul Naime ⁴ , Mosummath Hosna Ara ⁵

1 - Chemistry Discipline, Science Engineering and Technology School, Khulna University, Khulna, Bangladesh
2 - Chemistry Discipline, Science Engineering and Technology School, Khulna University, Khulna, Bangladesh
3 - Chemistry Discipline, Science Engineering and Technology School, Khulna University, Khulna, Bangladesh
4 - Chemistry Discipline, Science Engineering and Technology School, Khulna University, Khulna, Bangladesh
5 - Chemistry Discipline, Science Engineering and Technology School, Khulna University, Khulna, Bangladesh

تاريخ الإرسال : 16 الثلاثاء , ذو القعدة, 1441 تاريخ التأكيد : 24 السبت , محرم, 1442 تاريخ الإصدار : 16 الثلاثاء , ربيع الثاني, 1442

الکلمات المفتاحية: Activated Carbon, Contamination, Adsorption, Batch studies,

ملخص المقالة :

Under the present study, the adsorption capability of the activated carbon originated from Bombax ceiba fruit shell was examined using batch experimental mode. Bombax ceiba fruit shell was carbonized and chemically activated using zinc chloride (ZnCl2) as activating agent. The surface structure of the prepared activated carbon was examined by using scanning electron microscope (SEM). Some important experimental parameters namely pH of the solution, contact time and initial metal ion concentration in the solution, which affect the adsorption process were optimized. Maximum cadmium(II) removal from the aqueous solution was found at pH 9 with 0.3g/30mL adsorbent dose. The equilibrium in adsorption was attained after about 90 min of contact. Different adsorption isotherm models namely Langmuir, Freundlich and Temkin adsorption isotherm models were fitted to explain the equilibrium data obtained for the adsorption system. Temkin isotherm was found to show stronger correlation for cadmium(II) adsorption from the experimental solution onto the prepared adsorbent surface.

المصادر:

1. Drasch G.A., 1993. Increase of cadmium body burden for this century.  Sci Total Environ. 67, 75–89.

2. Cheremisinoff P.N., 1995. Handbook of Water and Wastewater Treatment Technology. Marcel Dekker, Inc, New York. 371-411.

3. Farooq U., Khan M.A., Athar M., Kozinski J.A., 2011. Effect of modification of environmentally friendly biosorbent wheat (Triticum aestivum) on the biosorptive removal of cadmium(II) ions from aqueous solution. Chem Eng J. 171, 400– 410.

4. Krishnan K.A., Anirudhan T.S., 2003. Removal of cadmium(II) from aqueous solutions by steam-activated sulphurised carbon prepared from sugar-cane bagasse pith: kinetic and equilibrium studies. Water SA. 29(2), 147–156.

5. Kalderis D., Bethanis S., Paraskeva P., Diamadopoulos E., 2008. Production of activated carbon from bagase and rice husk by a single stage chemical activation at low retention times. Biores Technol. 99(15), 6809–6816.

6. Song M., Jin B., Xiao R., Yang L.,Wu Y., Zhong Z., Huang Y., 2013. The comparison of two activation techniques to prepare activated carbon from corn cob. Biomass and Bioenergy. 48, 250–256.

7. Mohanty K., Das D., Biswas M.N., 2006. Preparation and characterization of activated carbons from Sterculia alata nutshell by chemical activation with zinc chloride to remove phenol from wastewater. Adsorption. 12, 119–132.

8. Foo K.Y., Hameed B.H., 2012. Mesoporous activated carbon from wood sawdust by K₂CO₃activation using microwave heating. Biores Technol. 111, 425–432.

9. Foo K.Y., Hameed B.H., 2012. Potential of jackfruit peel as precursor for activated carbon prepared by microwave induced NaOH activation. Biores Technol. 112, 143–150.

10. Foo K.Y., Hameed B.H., 2011. Utilization of rice husks as a feedstock for preparation of activated carbon by microwave induced KOH and K₂CO₃activation. Biores Technol. 102(20), 9814–9817.

11. Sahin Ö., Saka C., Ceyhan A.A., Baytar O., 2015. Preparation of high surface area activated carbon from Elaeagnus angustifolia seeds by chemical activation with ZnCl₂ in one-step treatment and its iodine adsorption. Sep Sci Technol. 50, 886–891.

12. Sodeinde O.A., 2012. Preparation of a locally produced activated carbon from coconut shells and its use in reducing hexamine cobalt (III). Int J Chem Eng App. 3(1), 67-71.

13. Mustafa S., Dilara B., Nargis K., Naeem A., Shahida P., 2002.  Surface properties of the mixed oxides of iron and silica. Colloids and Surfaces A: Physicochem Eng Aspects. 205, 273–282.

14. Savova D., Petrov N., Yardim M.F., Ekinci E., Budinova T., Razvigorova M., Minkova V., 2003. The influence of the texture and surface properties of carbon adsorbents obtained from biomass products on the adsorption of manganese ions from aqueous solution. Carbon. 41(10), 1897–1903.

15. Isaac C.P.J., Sivakumar A., 2013. Removal of lead and cadmium ions from water using Annona squamosa shell: kinetic and equilibrium studies. Desalin Water Treat. 51(40-42), 7700–7709.

16. Asgher M., Bhatti H.N., 2012. Removal of reactive blue 19 and reactive blue 49 textile dyes by citrus waste biomass from aqueous solution: equilibrium and kinetic study. Can J Chem Eng. 90, 412-419.

17. Aksu Z., 2005. Application of biosorption for the removal of organic pollutants: a review. Process Biochem. 40, 997–1026.

18. Yusuff A.S., Popoola L.T., Babatunde E.O., 2019. Adsorption of cadmium ion from aqueous solutions by copper‑based metal organic framework: equilibrium modeling and kinetic studies. App Water Sci. 9, 106.

19. Weber J., Walter J., 1972. Physicochemical Processes for Water Quality Control. Wiley Interscience, New York. 207-238.

20. Itodo A., 2011. Derived low cost biosorbent as water decolourizer. Res J Pharm Biol Chem Sci. 2(1), 663-700.

21. Cho H.H., Smith B.A., Wnuk J.D., Fairbrother D.H., Ball W.P., 2008. Influence of surface oxides on the adsorption of naphthalene onto multiwalled carbon nanotubes. Environ Sci Technol. 42(8), 2899–2905.

22. Apul O.G., Karanfil T., 2015. Adsorption of synthetic organic contaminants by carbon nanotubes: a critical review. Water Res. 68, 34–55.

23. Wang Y., Huang C., Xu T., 2011. Which is more competitive for production of organic acids, ion-exchange or electrodialysis with bipolar membranes? J Membr Sci. 374 (1), 150-156.

24. Babel S., Kurniawan T.A., 2003. Low-cost adsorbents for heavy metals uptake from contaminated water: a review. J Hazard Mater. 97 (1), 219-243.

25. Lin S.H., Juang R.S., 2009. Adsorption of phenol and its derivatives from water using synthetic resins and low-cost natural adsorbents: a review. J Environ Manag. 90 (3), 1336-1349.

26. Saeed A., Akhterb M.W., Iqbal M., 2005. Removal and recovery of heavy metals from aqueous solution using papaya wood as a new biosorbent. Sep Purif Technol. 45, 25-31.

27. Tran T.V., Bui Q.T.P., Nguyen T.D., 2017. A comparative study on the removal efficiency of metal ions (Cu²⁺, Ni²⁺, and Pb²⁺) using sugarcane bagasse-derived ZnCl₂-activated carbon by the response surface methodology. Adsorption Sci Technol. 35(1-2), 72-85.

28. Gupta V.K., Nayak A., 2012. Cadmium removal and recovery from aqueous solutions by novel adsorbents prepared from orange peel and Fe₂O₃ nanoparticles. Chem Eng. 180, 81-90.