ملخص المقالة :
The main concern of an olive grower is primarily to achieve more income and profits. A harvesting method having higher efficiency and better fruit and oil quality, but a higher operation cost leads to a lower benefit. A study was carried out to evaluate the techno-economic performances of Trunk Shaker (TS) and Mechanical Harvest Aid (MHA) shaker for harvesting the yellow and Manzanilla olive cultivars in Guilan province, Iran. A factorial experiment based on randomized complete block design was used in four treatments at three replicates. The percentage of harvested fruit, fruit harvest rate (kg h-1), harvesting efficiency, leaf abscission, canned fruit acidity, and the percentage of bruised fruits, fruit tissue resistance were determined as the technical traits and benefit to cost ratio to evaluate the economic performance of experimental olive harvesting methods. The results showed that the TS with 60.6 had more harvesting percent of fruit than the MHA (24.1). Average harvesting time of a tree was recorded 10.7 minutes by TS that this was 8.2 minutes in MHA. The harvesting efficiency in TS method of Manzanilla variety was much more MHA method and yellow variety. The efficiency was 100.38 kg h-1 in TS that is more than in the method of MHA with 43.72 kg h-1. Fruits harvested with TS, with an average of 1.07 Newton, had a higher firmness of the fruits in compared to MHA method. TS method with 1270 dollar per day had more benefit compared to MHA method with a profit of $606.
المصادر:
1. Abdine, M., Jbara, G., Bourghoul, A., Cardone, G., Dubla, E., Dragotta, A., Contento, F. & Famiani, F. (2006). Use of hand-held machines for olive harvesting of cultivars Sorani and Zeiti in Syria. Second International Seminar of Biotechnology and Quality of Olive Tree Products around the Mediterranean Basin. 5-10 November 2006, Marsala-Mazara Del Vallo. Italy.
2. Castro-Garcia, S., Rosa, U., Gliever, C., Smith, D., Burns, J., Krueger, W., Ferguson, L., & Glozer, K. (2009). Video evaluation of table olive damage during harvest with a canopy shaker. Horticulture Technology, 19, 260-266.
3. Ferguson, L. (2010). Mechanical harvesting of California table and oil olives. Advanced Horticulture of Science, 24, 53-63.
4.Ferguson, L., Rosa, U., Castro-Garcia, S., Lee, S., Guinard, J., Burns, J., Krueger, W., O,Connell, N. & Glozer, K. (2010). Mechanical harvesting of California table and oil olives. Advanced Horticulture Science, 24, 53-63.
5. Gardner, F.P., Piers, A.B., Michel, R.L. (2003). Crop Physiology. Koochaki, A. & Sarmad Nia, G., Transl., 10th Ed. Jihad-e-Daneshghahi Press, Mashhad, Iran (In Persian).
6. Gomez, J., Boulouha, B., Braham, M., Kadous, M., Guzman, J. & Serafini, F. (2008). Guide to olive orchard management in fragile ecosystems. First edition. Madrid, International Olive council publication.
7. Jimenez- Jimenez, F., Castro-Garcia, S., Blanco-Roldan, G., Gonzalez-Sanchez, E., & Gil-Ribes, J. (2013). Isolation of table olive damage causes and bruise time evolution during fruit detachment with trunk shaker. Spanish Journal of Agricultural Research, 11, 65-71.
8. Kermani, A.M. & Pile Forush, M. (2010). The evaluation of performance of olive harvesting devices on oil varieties. First National Conference on Mechanization and Modern Technologies in Agriculture, 7-8 September 2010, Ahvaz, Iran (In Persian).
9. Lamouria, L. & Hartmann, H. (1955). Machine harvesting of olives. USA, California Agriculture Publication. Pp: 8-9.
10. Ministry of Agriculture. (2012). Agricultural Data of Iran’s products in 2011, Ministry of Agriculture, Iran.
11.Nikkhah, S., & Ganji Moghadam, E. (2003). Effect of fungicide solution on qualitative and qualitative properties of apple variety Golden delicious. Journal of Agriculture Engineering Research, 24, 65-75 (In Persian).
12. Ravetti, L. & Robb, S. (2010). Continuous mechanical harvesting in modern Australian olive growing systems. Advanced Horticulture Science, 24, 71-77.
13. Sessiz, A., & Ozcan, M.T. (2006). Olive removal with pneumatic branch shaker and abscission chemical. Journal of Food Engineering, 76, 148-153.
15. Yousefi, Z., Nayeri, F., & Mohammad Salehi, M. (2013). The harvesting two varieties of canned olive by using tractor branch shaker. 8th National Congress of Agriculture Machines and Mechanization. 28-29 January 2013, Ferdowsi University of Mashhad, Mashhad, Iran (In Persian).
16. Zipori, I., Dag, A., & Tugendhaft, Y. (2014). Mechanical harvesting of table olives: Harvest efficiency and fruit quality. Horticulture Science, 49, 55-58.
