Vibration Behavior of Thick Sandwich Composite Beam with Flexible Core Resting on Incompressible Fluid Foundation

Subject Areas : Applied Mechanics

M Khosravi ¹ , Saeed Jafari Mehrabadi ² , Keramat Malekzadeh Fard ³

1 - Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran
2 - Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran
3 - Department of Structural Engineering and Simulations, Malek Ashtar University of Technology, Tehran, Iran

Received: 2022-09-20 Accepted : 2022-12-12 Published : 2023-03-01

Keywords: Fluid Foundation, Free vibration, Higher-Order Theory, Thick composite beam, Flexible core,

Abstract :

In this research, free flexural vibration of a thick sandwich composite beam that is made up of two composite face sheets and a flexible foam-made core based on a fluid is investigated. Governing equations for the sandwich beam were extracted using a higher-order theory. The face sheets were modeled using the first-order shear deformation theory (FSDT). In the analysis of the multilayer sandwich composite beam, the layers and the core in the middle were assumed to be well attached to one another, and continuous strain functions at the layer interfaces were assumed. Moreover, displacements were assumed to be small, so that the analyses could be performed in linear elastic region with simply supported boundary condition for the beam. Equations of motion of the beam were extracted using energy equations and Hamilton’s principle. Continuing with the research, effects of changing different parameters were evaluated; these included core thickness to total thickness ratio, beam length to total thickness ration, face sheet material, fluid density, and fluid height. The results showed that the presence of the liquid tend to lower the natural frequency of the structure. Our investigations further indicated that the natural frequency follows an increasing trend with decreasing the fluid density.

References:

1. Frostig Y.,Thomsen O.T., 2004, High-order free vibration of sandwich panels with a flexible core, International Journal of Solids and Structures 41: 1697-1724.


2. Amirani M.C., Khalili S.M.R., Nemati N., 2009, Free vibration analysis of sandwich beam with FG core using the element free Galerkin method, Composite Structures 90: 373-379.


3. Banerjee J.R., 2007, Free vibration of a three-layered sandwich beam using the dynamic stiffness method and experiment, International Journal of Solids and Structures 44: 7543-7563.


4. Damanpack A.R., Khalili S.M.R., 2012, High-order free vibration analysis of sandwich beams with a flexible core using dynamic stiffness method, Composite Structures 94: 1503-1514.


5. Khdeir A.A., Aldraihem O.J., 2016, Free vibration of sandwich beams with soft core, Composite Structures 154: 179-189.


6. Salami S.J., 2016, Extended high order sandwich panel theory for bending analysis of sandwich beams with carbon nanotube reinforced face sheets, Physica E: Low-Dimensional Systems and Nanostructures 76: 187-197.


7. Stoykov S., Margenov S., 2014, Nonlinear vibrations of 3D laminated composite beams, Mathematical Problems in Engineering 1: 1-14.


8. Robinson N.J.,Palmer S.C., 1990, A modal analysis of a rectangular plate floating on an incompressible liquid, Journal of Sound and Vibration 142: 453-460.


9. Hashemi S.H.H., Karimi M., Taher H.R.D., 2010, Vibration analysis of rectangular Mindlin plates on elastic foundations and vertically in contact with stationary fluid by the Ritz method, Ocean Engineering 37: 174-185.


10. Hosseini-Hashemi S., Karimi M., Rokni H., 2012, Natural frequencies of rectangular Mindlin plates coupled with stationary fluid, Applied Mathematical Modelling 36: 764-778.


11. Rezvani S.S., 2015, Effects of added mass parameter on fluid-structure natural frequencies by using analytical, numerical and experimental methods, Amirkabir Journal of Science and Research in Mechanical Engineering 47: 61-70.


12. Esmailzadeh M., 2008, Three-dimensional modeling of curved structures containing and/or submerged in fluid, Finite Elements in Analysis and Design 44: 334-345.


13. Li H.-C., 2020, Free vibration of variable thickness FGM beam submerged in fluid, Composite Structures 233: 111582.


14. Malekzadeh K., Khalili S.M.R., Veysi Gorgabad A., 2015, Dynamic response of composite sandwich beams with arbitrary functionally graded cores subjected to low-velocity impact, Mechanics of Advanced Materials and Structures 22: 605-618.


15. Reddy J.N., 2003, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC press.


16. Reddy J.N., 2017, Energy Principles and Variational Methods in Applied Mechanics, John Wiley & Sons.


17. Mindlin R.D., 1951, Influence of transverse shear deformation on the bending of classical plates, Journal of Applied Mechanics, Transactions ASME 8: 18-31.


18. Jeong K.-H., Amabili M., 2006, Bending vibration of perforated beams in contact with a liquid, Journal of Sound and Vibration 298: 404-419.


19. Yang M.,Qiao P., 2005, Higher-order impact modeling of sandwich structures with flexible core, International Journal of Solids and Structures 42: 5460-5490.


20. Frostig Y., Baruch M., 1994, Free vibrations of sandwich beams with a transversely flexible core: a high order approach, Journal of Sound and Vibration 176: 195-208.


21. Rahmani O., 2009, Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core, Composite Structures 91: 229-235.


22. Malekzadeh F.K., 2012, Buckling analysis of composite sandwich panel with symmetric FGM core, using improved high-order theory, Aerospace Mechanics Journal 8: 55-70.


23. Nayak A.K., Shenoi R.A., Moy S.S.J., 2002, Analysis of damped composite sandwich plates using plate bending elements with substitute shear strain fields based on Reddy's higher-order theory, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 216: 591-606.


24. Rahmanei H., Jafari A.A., 2016, Vibration analysis of a rectangular composite plate in contact with fluid, Iranian Journal of Mechanical Engineering Transactions of the ISME 17: 67-83.