Thermodynamic Stability of Sandwich Micro-Beam with Honeycomb Core and Piezoelectric / Porous Viscoelastic Graphene Facesheets
Subject Areas : Mechanical Engineering
I. Safari
1
(
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
)
Pouya Pourmousa
2
(
Mechanical engineering
)
Elham Haghparast
3
(
University of Kashan
)
S. Niknejad
4
(
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
)
A. Ghorbanpour Arani
5
(
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.
)
Keywords: Thermal dynamics stability, Graphene, Honeycomb, Piezoelectric, Visco Pasternak foundation,
Abstract :
In this paper, thermal dynamic stability analysis of sandwich microbeams made of a honeycomb core and piezoelectric and porous visco graphene sheets resting on visco Pasternak is studied. The microbeam is modeled based on the zigzag theory and in order to incorporate the size effect, strain gradient theory is utilized. The set of the governing equations are derived Hamilton’s principle and are solved numerically using Galerkin method. The influences of various parameters on the thermal dynamic stability characteristics of the sandwich nanobeam are investigated including small scale, temperature changes, core to face sheets thickness ratio, intensity of electric fields and stiffness of elastic medium. The results of present work can be used to optimum design and control of micro-thermal/electro-mechanical devices.
[1] Salvetat-Delmotte JP, Rubio A, 2002, Mechanical properties of carbon nanotubes: a fiber digest forbeginners, Carbon , 40(10):1729-1734.
[2] Esawi AMK, Farag MM, 2007, Carbon nanotube reinforced composites: potential and current challenges, Material Design, 28(9):2394-2401.
[3] Fiedler B, Gojny FH, Wichmann MHG, Nolte MCM, Schulte K, 2006, Fundamental aspects of nano-reinforced composites. Composite Science and Technology; 66:3115-3125.
[4] Mohammadimehr M, Monajemi A.A, Afshari H, 2020, Free and forced vibration analysis of viscoelastic damped FG-CNT reinforced micro composite beams, Microsystem Technologies, 26: 3085–3099.
[5] Mohammadimehr M, Mohammadi Hooyeh H, Afshari H, Salarkia M.R., 2016, Size-dependent Effects on the Vibration Behavior of a Timoshenko Microbeam subjected to Pre-stress Loading based on DQM, Mechanics of Advanced Composite Structures, 3: 99-112.
[6] Mohammadimehr M, Emdadi M, Afshari H, Rousta Navi B, 2018, Bending, buckling and vibration analyses of MSGT microcomposite circular-annular sandwich plate under hydro-thermo-magneto-mechanical loadings using DQM, International Journal of Smart and Nano Materials, 9(4).
[7] Afshari, H. and Adab N, 2020. Size-dependent buckling and vibration analyses of GNP reinforced microplates based on the quasi-3D sinusoidal shear deformation theory. Mechanics Based Design of Structures and Machines, In Press.
[8] Zheng S, Chen M, Li Z, and Wang H, 2016, Size-dependent constituent equations of piezoelectric bimorphs, Composite Structures, 150: 1–7.
[9] Zheng S, Li Z, Chen M, and Wang H, 2016, Size-dependent static bending and free vibration of polarized PLZT micro cantilevers, Smart Mater. Structures, 28(20):2920-2932.
[10] Chen M and Zheng S, 2017, Size-dependent static bending of a microbeam with a surface-mounted 0–1 polarized PbLaZrTi actuator under various boundary conditions, Material Systems and Structures, 28: (20): 2920-2932.
[11] Nejati M, Ghasemi A-, Soltanimaleki A, Dimitri R, Tornabene F, 2019, Thermal vibration analysis of SMA hybrid composite double curved sandwich panels, Composite Structures, 224:111035.
[12] Arshid E, Khorshidvand A.R, 2018, Free vibration analysis of saturated porous FG circular plates integrated with piezoelectric actuators via differential quadrature method, Thin-Walled Structures, 125: 220-233.
[13] Arshid E, Amir S, Loghman A, 2020, Static and dynamic analyses of FG-GNPs reinforced porous nanocomposite annular micro-plates based on MSGT, International Journal of Mechanical Sciences, 180:105656.
[14] Kiani A, Amir S, Zarghami Dehaghani M, 2019, Asymmetric free vibration analysis of first-order shear deformable functionally graded magneto-electro-thermo-elastic circular plates, Journal of Mechanical Engineering Science, 233: 5659-5675.
[15] Mohammadimehr M, Arshid E, Alhosseini S.M.A, Amir S, Arani Ghorbanpour M. R, 2019, Free vibration analysis of thick cylindrical MEE composite shells reinforced CNTs with temperature-dependent properties resting on viscoelastic foundation, Structural Engineering and Mechanics, 70: 683-702.
[16] Arshid E, Kiani A, Amir S, 2019, Magneto-electro-elastic vibration of moderately thick FG annular plates subjected to multi physical loads in thermal environment using GDQ method by considering neutral surface, Journal of Materials: Design and Applications, 233: 2140-2159.
[17] Amine Daikh A, Ashraf M. Zenkour A.M, 2019, Effect of porosity on the bending analysis of various functionally gradedsandwich plates, Materials Research Express.
[18] Amir S, Soleimani Z, Arshid E, 2019, Size‐dependent free vibration of sandwich micro beam with porous core subjected to thermal load based on SSDBT, 99: e201800334.
[19] Amir S, Arshid E, Alhosseini S. M. A, Loghman A, 2019, Quasi-3D tangential shear deformation theory for size-dependent free vibration analysis of three-layered FG porous micro rectangular plate integrated by nano-composite faces in hygrothermal environment, Journal of Thermal Stresses, 43: 133-156.
[20] Amir S, Arshid E, Ghorbanpour Arani M.R, 2019, Size-dependent magneto-electro-elastic vibration analysis of FG saturated porous annular/ circular micro sandwich plates embedded with nano-composite face sheets subjected to multi-physical pre loads, Smart Structures and Systems, 23: 429-447.
[21] Amir S, Vossough A.R, Vossough H, Arshid E, 2020, Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs, Mechanics of Advanced Composite Structures, 7: 109-119.
[22] Amir S, Khorasani M, BabaAkbar-Zarei H, 2020, Buckling analysis of nanocomposite sandwich plates with piezoelectric face sheets based on flexoelectricity and first-order shear deformation theory, Journal of Sandwich Structures & Materials, 22: 2186-2209.
[23] Amir S, Rezaei Bidgoli E.M, Arshid E, 2020, Size-dependent vibration analysis of a three-layered porous rectangular nano plate with piezo-electromagnetic face sheets subjected to pre loads based on SSDT, Mechanics of Advanced Materials and Structures, 27: 605-619.
[24] Karami B, Janghorban M, Shahsavari D, Dimitri R, Tornabene F, 2019, Nonlocal Buckling Analysis of Composite Curved Beams Reinforced with Functionally Graded Carbon Nanotubes, Molecules, 24:2750.
[25] Yoosefian A.R, Golmakani M.E, Sadeghian M, 2020, Nonlinear bending of functionally graded sandwich plates under mechanical and thermal load, Journal Pre-proof, 84:105-161.
[26] Al Shujairi M., Mollamahmutoglu Ç, 2018, investigated Buckling and free vibration analysis of functionally graded sandwich micro-beams resting on elastic foundation by using nonlocal strain gradient theory in conjunction with higher order shear theories under thermal effect, Composites Part B, 154:292-312.
[27] Aria A.I, Friswell M.I, 2019, Computational hygro-thermal vibration and buckling analysis of functionally graded sandwich microbeams, Composites Part B 165: 785–797.
[28] Chen Z, Li J, Sun L, Li L, 2019, Flexural buckling of sandwich beams with thermal-induced non-uniform sectional properties, Journal of Building Engineering 25: 100782.
[29] Esen I, 2019, Dynamic response of functional graded Timoshenko beams in a thermal environment subjected to an accelerating load, European Journal of Mechanics / A Solids, 78: 10384.
[30] Ghorbanpour Arani A, Zarei H.B, Pourmousa P, Eskandari M, 2018, Investigation of free vibration response of smart sandwich micro-beam on Winkler–Pasternak substrate exposed to multi physical fields, Microsystem Technologies, 24:3045–3060.
[31] Fu T, Chen Z, Yu H, Li Ch, Zhao Y, 2019, Thermal buckling and sound radiation behavior of truss core sandwich panel resting on elastic foundation, International Journal of Mechanical Sciences 161: 105055.
[32] Yuan W, Wang X, Song H.W, Huang C.G, 2014, A theoretical analysis on the thermal buckling behavior of fully clamped sandwich panels with truss cores. J Therm Stress, 37(12):1433–48.
[33] W Yuan, HW Song, Huang CG, 2016, Failure maps and optimal design of metallic sandwich panels with truss cores subjected to thermal loading. Int J Mech Sci, 115:56–67.
[34] Mohammadimehr M, Mohammadi Hooyeh M, Afshari H, Salarkia M.R., 2016, Free vibration analysis of double-bonded isotropic piezoelectric Timoshenko micro-beam based on strain gradient and surface stress elasticity theories under initial stress using DQM, Mechanics of Advanced Materials and Structures, 24(6).
[35] Torabi K, Afshari H, Aboutalebi F.H., Vibration and flutter analyses of cantilever trapezoidal honeycomb sandwich plates, Journal of Sandwich Structures & Materials, 21(8): 2887-2920.
[36] Li Ch, Shen H, Wang H, 2019, Thermal post-buckling of sandwich beams with functionally graded negative Poisson’s ratio honeycomb core, International Journal of Mechanical Sciences 152: 289–297.
[37] Liu Y, Shengkai Su, Huang H, Liang Y, 2018, Thermal-mechanical coupling buckling analysis of porous functionally graded sandwich beams based on physical neutral plane, Composites Part B, 168:236-242.
[38] Marynowski K, 2018, Vibration analysis of an axially moving sandwich beam with multiscale composite facings in thermal environment, International Journal of Mechanical Sciences 146: 116–124.
[39] Pradhan M, Dash P.R, 2016, Stability of An Asymmetric Tapered Sandwich Beam Resting On A Variable Pasternak Foundation Subjected To A Pulsating Axial Load With Thermal Gradient, Composite Structures, 140 : 816-834.
[40] Waddar S, Pitchaimani J, Doddamani M, Barbero E, 2019, Buckling and vibration behaviour of syntactic foam core sandwich beam with natural fiber composite facings under axial compressive loads, Composites Part B, 175:107133.
[41] Carrera E, 2003, Historical review of zigzag theories for multilayered plate and shell, Mech. Rev, 56:287–308.
[42] Tessler.A, Sciuva M Di, Gherlone M, 2009, A refined zigzag beam theory for composite and sandwich beams, Journal of composite, 43: 1051-1081.
[43] Ghorbanpour Arani A, Kolahchi R, Vossough H, 2013, Buckling analysis and smart control of SLGS using elastically coupled PVDF nanoplate based on nonlocal Mindlin plate theory, 407: 4458-4465.
[44] He X Q, Ng T.Y, Sivashanker S, Liew K.M, 2001, Active control of FGM plates with integrated piezoelectric sensors and actuators, International Journal of Solids and Structures 38: 1641-1655.
[45] Ke LL, Liu C, Wang YS, 2015, Free vibration of nonlocal piezoelectric nanoplates under various boundary conditions. Phys E, 66:93–106.
[46] Chen D, Yang J and Kitipornchai S, 2015, Elastic buckling and static bending of shear deformable functionally graded porous beam. Compos Structures, 133: 54–61.
[47] Al Rjoub YS and Hamad AG, 2017, Free vibration of functionally Euler-Bernoulli and Timoshenko graded porous beams using the transfer matrix method. KSCE J Civ Eng, 21: 792–806.
[48] Shafiei N, Mousavi A and Ghadiri M, 2016, On size-dependent nonlinear vibration of porous and imperfect functionally graded tapered microbeams. Int J Eng Sci, 106: 42–56.
[49] Hong C.C, 2014, Thermal vibration and transient response of magnetostrictive functionally graded material plates, European Journal of Mechanics A/Solids, 43: 78-88.
[50] Kandasamy R , Dominique S, 2018, Finite Element Based Active Vibration Control of Hierarchical Honeycomb Plates Integrated with Piezoelectric Actuator, SAE International, https://doi.org/10.4271/2018-01-1558.
[51] An L.Q., Zhang X.C., Wu H.X., Jiang W.Q, 2017, In-PlaneDynamic Crushing and Energy Absorption Capacity of SelfSimilar Hierarchical Honeycombs, Advances in Mechanical Engineering, 9(6):1-15.
[52] Mousanezhad D. Haghpanah B, Ghosh R., Hamouda A.M, 2016, Elastic Properties of Chiral, Anti-Chiral, and Hierarchical Honeycombs: A Simple Energy-Based Approach, Theoretical and Applied Mechanics Letters 6(2):81-96.
[53] Su Z, Jin G, Wang Y, Ye X, 2016, A general Fourier formulation for vibration analysis of functionally graded sandwich beams with arbitrary boundary condition and resting on elastic foundations, Acta Mech, 227(5):1493–1514.
[54] Ghorbanpour Arani A, Amir S, 2013, Electro-thermal vibration of visco-elastically coupled BNNT systems conveying fluid embedded on elastic foundation via strain gradient theory, Physica B, 419:1–6.
[55] Mohammadimehr M, Mohammadi Hooyeh H, Afshari H, Salarkia M.R, 2016, Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM, Mechanics of Advanced Composite Structures, 3:99-112.
[56] Kolahchi R, Dynamic stability analysis of temperature-dependent functionally graded CNT reinforced visco-plates resting on orthotropic elastomeric medium.
[57] Ansari R, Gholami R, Sahmani S, 2012, On the dynamic stability of embedded single-walled carbon nanotubes including thermal environment effects, Scientia Iranica F, 19 (3):919–925.
[58] Saffari SH, Hashemian M, Toghraie D, 2017, Dynamic stability of functionally graded nanobeam based on nonlocal Timoshenko theory considering surface effects, http://dx.doi.org/10.1016/j.physb.2017.06.029.
[59] He X.Q., Ng T.Y, Sivashanker S, Liew K.M, 2001, Active control of FGM plates with integrated piezoelectric sensors and actuators, International Journal of Solids and Structures, 38: 1641-1655.
[60] Lam K.Y., Ng T.Y, 1999, Active control of composite plates with integrated piezoelectric sensors and actuators under various dynamic loading conditions. Smart Materials and Structures, 8:223-237.
[61] Yin Yu, Hui-Shen Shen, Hai Wang, D. 2017, Postbuckling of sandwich plates with graphene-reinforced composite face sheets in thermal environments, Composites Part B, 10.1016/j.compositesb.2017.09.045.
[62] Li CH, Shen Hui, Wang Hai, 2019, Thermal post-buckling of sandwich beams with functionally graded negative Poisson’s ratio honeycomb core, International Journal of Mechanical Sciences 152: 289–297.