تدوین استراتژیهای کاهش انتشار گازهای گلخانهای در صنعت فولاد با استفاده از مدل LEAP جنوبی
محورهای موضوعی : آلودگی هواماندانا مقصودی دربه 1 , علی محمدی 2 * , فریده عتابی 3
1 - کارشناس ارشد مهندسی محیط زیست- آلودگی هوا، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران. ایران
2 - استادیار گروه برنامهریزی، مدیریت و آموزش محیطزیست، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران. ایران
3 - دانشیار گروه مهندسی محیط زیست، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران. ایران
کلید واژه: تغییر اقلیم, گازهای گلخانه¬ای, مصرف انرژی, مدلLEAP, صنعت فولاد.,
چکیده مقاله :
زمینه و هدف: هدف از این مطالعه تحلیل اثر بخشی اقدامات مختلف بر کاهش انتشار گازهای گلخانهای در صنعت فولاد و الویتبندی راهکارهای پیشنهادی و ارایه بسته مدیریت انتشار گازهای گلخانهای در صنعت فولاد کشور است. صنعت فولاد بعد از نیروگاهها، دومین صنعت انرژی بر میباشد.
روش بررسی: در این تحقیق ابتدا سیاستهای توسعه صنعت فولاد و اثر آنها بر تقاضای انرژی این صنعت و انتشار گازهای گلخانه ای در سناریوی پایه، سپس اثر سیاست های مختلف در کاهش مصرف انرژی و انتشار گازهای گلخانه ای با استفاده از مدل ساز LEAP. بررسی گردید. پس از آن سیاستها با توجه به پتانسیلهای کاهش انتشار الویتبندی شد و در نهایت بسته مدیریتی پیشنهاد شده است. سناریوهای تعریف شده چهار نوع هستند: سناریوهای پایه، بهینهسازی، نوسازی و سناریوی مربوط به جایگزینی سوخت در تولید برق مورد نیاز صنعت فولاد
یافتهها: در صورت اجرای سه سناریوی بهینهسازی الویت با سناریوی BOF است. در صورت اجرای سناریوهای نوسازی الویت با استفاده از فناوری MIDREX است. از آنجایی که بیشتر برق کشور از طریق سوزاندن سوخت فسیلی تولید میشود در صورتیکه استفاده از سوخت مایع در نیروگاه ها انجام می شد جایگزینی با سوخت گاز طبیعی می توانست کاهش زیادی در میزان انتشار کربن نشان دهد ولی با توجه به اینکه نیروگاههای کشور اکثراً از سوخت گاز طبیعی استفاده میکنند چنین سناریویی حذف میشود.
نتیجهگیری: در مجموع نتایج نشاندهنده این است که اثر بخشترین راهکار در کاهش انتشار معادل دیاکسیدکربن در سال 2030 در سناریوی MIDREX دیده میشود که از سناریوهای زیر مجموعه نوسازی میباشد.
Background and Purpose: The aim of this study is analyze the effectiveness of different measures for mitigation of greenhouse gas emissions in the steel industry and prioritizing strategies and management packages on greenhouse gas emissions in the countries’ steel industry. Steel industry after the power plants, is the second most energy intensive industry.
Analysis method: In this investigation at first steel industry development policies and their consequence on energy demand and greenhouse gas emissions in the baseline scenario. Then the policies due to the potential emission reduction were prioritized and the management package was suggested. Four scenarios was defined: Baseline Scenarios, optimization, renovation and replacement fuel in power generation scenarios in the steel industry
Findings: In case of running the three optimization scenarios, BOF scenario takes priority. If running modernization scenarios MIDREX takes priority. Since most of the country's electricity is generated by burning fossil fuels, in case of usage liquid fuels in power plants, replacing natural gas would show a significant decrease in carbon emissions, however considering that most of the country's power plants use natural gas fuel this scenario will be deleted
Conclusion: The results demonstrate that the greatest impact on reducing carbon dioxide equivalent emissions in 2030 is MIDREX scenario in the sub- renovation scenarios.
1. http://www4.unfccc.int/submissions/indc/Submission%20Pages/submissions.aspx
2. Renewable Energy & Energy Efficiency Organization of Iran, Annual report, 2014, Renewable Energy & Energy Efficiency Organization of Iran (SATBA) Publication (in Persian)
3. Ahadi, Mohammad Sadegh, 2002, Comprehensive Plan of Energy Resources Based on Environmental Criteria (Domestic Sector), Amir Kabir University of Technology (in Persian)
4. Analysis of Mining Industry (Iron & Steel), 1999, Ministry of Social Welfare & Social Security (in Persian)
5. Third Climate Change National Report, 2015, Department of the Environment (DOE), National Plan for Climate change
6. Nakhaei, Fardis et al., 2011, Global Production Trend of Iron and Steel Concentrates & Measures to Reduce the Energy Consumption, Industrial Technology Development Bi-annual, #19, pages 39 – 49 (in Persian)
7. National Pension Fund Audit Institute, 2008, Analysis of Mining Industries, Iron and Steel, Qom, Sahafi publications (in Persian)
8. Bahri, Zahra et al., 2012, Applied Techniques for Recycling and Storage of Energy for the Mitigation of CO2 Emissions in Furnaces During the Production of Iron and Steel, 3rd Conference of Industrial Furnaces, Tehran, Kimia Energy Ham-Andishan (in Persian)
9. John T. Kopfle, James M. McClelland, Gary E. Metius, Midrex Technologies, Inc, 2008
10. Global Steel Industry Perspective – Synthesis Version, European Steel Technology & Application Days, 2014
11. http://www.fooladnews.com/print_page/23791/0
12. )www.midrex.com(