Energy and Exergy Analysis of an Ejector-Absorption Refrigeration Cycle with Using NH3-H2O as the Working Fluids

Subject Areas : Journal of Environmental Friendly Materials

A.  Habibzadeh ¹ (Department of Mechanical Engineering, Engineering Faculty, Urmia University, Urmia, Iran.)
S.  Jafarmadar ² (Department of Mechanical Engineering, Engineering Faculty, Urmia University, Urmia, Iran.)
M.  M. Rashidi ³ (Department of Civil Engineering, University of Birmingham, Edgbaston, Birmingham, England.)
S.  S. Rezaei ⁴ (Department of Mechanical Engineering, Engineering Faculty, Bu Ali Sina University, Hamedan, Iran.)
A.  Aghagoli ⁵ (Department of Mechanical Engineering, Engineering Faculty, Bu Ali Sina University, Hamedan, Iran.)

Received: 2017-08-31 Accepted : 2017-08-31 Published : 2017-09-01

Keywords:

Abstract :

In this paper, the thermodynamic simulation and the first and second laws analysis of an ammonia-water ejector-absorption refrigeration cycle is presented. A computer program has been applied in order to investigate the effects of parameters such as condenser, absorber, generator, and evaporator on the performance coefficient and exergy efficiency of this cycle. The results showed that in general when the temperature of different parts increases, performance coefficient and the exergy efficiency of the cycle decreases except for evaporator and generator that causes an increase in COP. The Entrainment ratio of the ejector, COP and exergy efficiency of the cycle decreases when the condenser temperature rises. Evaporator temperature increase leads to the increase of all studied parameters except exergy efficiency. Moreover, absorber and ejector have the highest exergy losses in the studied conditions. When generator temperature rises, total exergy loss and the entrainment ratio increase but leads to the reduction of the exergy efficiency.

References:

[1] J. Fernandez-Seara, M. Vazquez, Appl. Therm. Eng., 21(2001), 343.

[2] X. J. Zhang, R. Z. Wang, Appl. Therm. Eng., 22(2002), 1245.

[3] L. Kairouani, E. Nehdi, Appl. Therm. Eng., 26(2006), 288.

[4] M. Jelinek, A. Levy and I. Borde, Appl. Therm. Eng., 42(2012), 2.

[5] S. F. Lee, S. A. Sherif, Int. J. Energ. Res., 25(2001), 1019.

[6] M. M. Talbi, B. Agnew, Appl. Therm. Eng., 20(2000), 619.

[7] D. Hong, L. Tang, Y. He and G. Chen, Appl. Therm. Eng., 30(2010), 2045.

[8] C. Vereda, R. Ventas, A. Lecuona and M. Venegas, Appl. Energ., 97(2012), 305.

[9] G. K. Alexis, E. D. Rogdakis, Appl. Therm. Eng., 22(2002), 97.

[10] A. Sözen, T. Menlik and E. Özbas, Appl. Therm. Eng., 33(2012), 44.

[11] L. T. Chen, Appl. Energ., 30(1988), 37.

[12] A. Levy, M. Jelinek and I. Borde, Appl. Energ., 72(2002), 467.

[13] J. Wang, G. Chen and H. Jiang, Int. J. Energ. Res., 22(1998), 733.

[14] L. Shi, J. Yin, X. Wang and M. S. Zhu, Appl. Energ., 68(2001), 161.

[15] M. M. Rashidi, O. Anwar, Bég and A. Aghagoli, Int. J. Appl. Math. Mech., 8(2012), 1.

[16] G. Besagni, R. Mereu and F. Inzoli, Renew. Sust. Energ. Rev., 53(2016), 373.

[17] J. Chen, S. Jarall, H. Havtun and B. Palm, Renew. Sust. Energ. Rev., 49(2015), 67.

[18] S. Rao, G. Jagadeesh, Appl. Therm. Eng., 78(2015), 289.

[19] F. Kong, H. Kim and T. Setoguchi, JV, 4(2015).

[20] F. Mazzelli, A. Milazzo, Int. J. Refrig., 49(2015), 79.

[21] K. Śmierciew, D. Butrymowicz, R. Kwidziński and T. Przybyliński, Appl. Therm. Eng., 78(2015), 630.

[22] M. Dennis, T. Cochrane and A. Marina, Sol. Energy, 115(2015), 405.

[23] T. Zegenhagen, F. Ziegler, Int. J. Refrig., 56(2015), 173.

[24] J. Bao, Y. Lin and G. He, Int. J. Refrig., (2017).

[25] J. Szargut, D. R. Morris and F. R. Steward: Exergy analysis of thermal, chemical, and metallurgical processes, Hemisphere Publishing Corporation, New York, (1988).

[26] A. Bejan: Advanced engineering thermodynamics, Wiley, New York, (1988).

[27] A. Sozen, Energ. Convers. Manage, 42(2001), 1699.

[28] M. Kilic, O. Kaynakli, Energy, 32(2007), 1505.

[29] S. A. Klein, Engineering equation solver version 8.414., professional version, McGraw-Hill, (2009).