Vibration of circular sandwich plates with FG face sheets on the Pasternak elastic foundation
Subject Areas : Analytical and Numerical Methods in Mechanical Design
1 - Department of Mechanics, Tuyserkan Branch, Islamic Azad University, Tuyserkan, Iran
Keywords: Vibration, Circular, Sandwich plate, FGM, Pasternak elastic foundation,
Abstract :
In this paper, the free vibration behaviour of the circular sandwich plates with two functionally graded face sheets on the Pasternak elastic foudation is investigated in a clamped boundary condition based on a high order sandwich plate theory. By considering the inplane stresses of the core the theory is modified and the obtained equation is more accurate. The material properties of the functionally graded face sheets and the homogeneous core are assumed to be temperature- dependent. The functionally graded materials vary continuosly through the thickness according to a power - law distribution. The governing equations of the motion are derived by using Hamilton’s principle and a Glaerkin method is used to solve the equations. To verify the results of the present method, they are compared with the finite element results which obtained by Abaqus software and for special cases with the results in some literatures which a good agreement is found between them.
[1] Rahmani, M., Dehghanpour, S. and Barootiha, A., 2020. Free vibration analysis of sandwich beams with FG face sheets based on the high order sandwich beam theory. Journal of Modern Processes in Manufacturing and Production, 9(2), pp.57-71.
[2] Mahamood RM, Akinlabi ET, Functionally graded materials. Springer, New York, 2017.
[3] Mollarazi HR, Foroutan M, Moradi-Dastjerdi R. Analysis of free vibration of functionally graded material (FGM) cylinders by a meshless method. J Compos Mater 2012; 46(5): 507-515.
[4] Dai HL, Rao YN, Jiang HJ. Thermoelastic dynamic response for a long functionally graded hollow cylinder. J Compos Mater 2013; 47(3): 315-325.
[5] Sofiyev AH. On the vibration and stability of clamped FGM conical shells under external loads. J Compos Mater 2011; 45(7): 771-788.
[6] Kim KD, Lomboy GR, Han SC. Geometrically non-linear analysis of functionally graded material (FGM) plates and shells using a four-node quasi-conforming shell element. J Compos Mater 2008; 42(5): 485-511.
[7] Dai HL, Guo ZY, Yang L. Nonlinear dynamic response of functionally graded materials circular plates subject to low-velocity impact. J Compos Mater 2013; 47(22): 2797-2807.
[8] V. Tahouneh, M. H. Yas, “ 3D free vibration analysis of thick functionally graded annular sector plates on Pasternak elastic foundation via 2-D differential quadrature method” Acta Mechanica, Vol. 223, no. 9, pp. 1879-1897, 2012.
[9] Singh, S. J., & Harsha, S. P. (2019). Nonlinear dynamic analysis of sandwich S-FGM plate resting on pasternak foundation under thermal environment. European Journal of Mechanics-A/Solids, 76, 155-179.
[10] Gao, K., Gao, W., Wu, D., & Song, C. (2017). Nonlinear dynamic characteristics and stability of composite orthotropic plate on elastic foundation under thermal environment. Composite Structures, 168, 619-632.
[11] Keleshteri, M. M., Asadi, H., & Aghdam, M. M. (2019). Nonlinear bending analysis of FG-CNTRC annular plates with variable thickness on elastic foundation. Thin-Walled Structures, 135, 453-462.
[12] Mohammadi, Y., H Safari, K. and Rahmani, M., 2016. Free vibration analysis of circular sandwich plates with clamped FG face sheets. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 9(4), pp.631-646.
[13] Prakash T, Ganapathi M. Asymmetric flexural vibration and thermo elastic stability of FGM circular plates using finite element method, Compos Part B-Eng 2006; 37: 642–649.
[14] Civalek Ö. Analysis of thick rectangular plates with symmetric cross-ply laminates based on first-order shear deformation theory. J Compos Mater 2008; 42(26): 2853-2867.
[15] Cohen GA. Effect of transverse shear deformation on anisotropic plate buckling. J Compos Mater 1982; 16(4): 301-312.
[16] Frostig Y, Baruch M, Vilnay O, Sheinman I. High-order theory for sandwich-beam behavior with transversely flexible core. J Eng Mech 1992; 118(5): 1026-1043.
[17] Malekzadeh K, Khalili MR, Jafari A, & Mittal RK. Dynamic response of in-plane pre-stressed sandwich panels with a viscoelastic flexible core and different boundary conditions. J Compos Mater 2006; 40(16):1449-1469.
[18] Mantari JL, Granados EV, Guedes SC. Vibrational analysis of advanced composite plates resting on elastic foundation, Compos Part B-Eng 2014; 66: 407–19.
[19] Rahmani, M., Mohammadi, Y. and Abtahi, M., 2024. Nonlinear Buckling Analysis of Different Types of Porous FG Sandwich Beams with Temperature-Dependent. Journal of Modern Processes in Manufacturing and Production, 4(4), p.71.
[20] Salami SJ, Dariushi S, Sadighi M, Shakeri M. An advanced high-order theory for bending analysis of moderately thick faced sandwich beams, Eur J Mech A-Solid 2016; 56:1–11.
[21] Frostig Y, Birman V, Kardomateas GA. Non-linear wrinkling of a sandwich panel with functionally graded core–extended high-order approach. Int J Solids Struct 2018; 148:122-139.
[22] Shahrjerdi A, Mustapha F, Bayat M, Majid DLA. Free vibration analysis of solar functionally graded plates with temperature-dependent material properties using second order shear deformation theory, J Mech Sci Technol 2011; 25(9): 2195.
[23] Frostig Y, Thomsen OT. On the free vibration of sandwich panels with a transversely flexible and temperature dependent core material – Part II: Numerical study, Compos Sci Technol 2009; 69: 863–869.
[24] Pandey S, Pradyumna S. Free vibration of functionally graded sandwich plates in thermal environment using a layer-wise theory, Eur J Mech A-Solid 2015; 51: 55–66.
[25] Sherif HA. Free flexural vibrations of clamped circular sandwich plates, J Sound Vib 1992; 157(3): 531-537.
[26] Chan Il Park. Frequency equation for the in-plane vibration of a clamped circular plate, J Sound Vib 2008; 313: 325–333.
[27] Nie GJ, Zhong Z. Semi-analytical solution for three-dimensional vibration of functionally graded circular plates. Comput Method Appl M 2007; 196(49-52): 4901-4910.
[28] Ebrahimi F, Rastgoo A, Kargarnovin MH. Analytical investigation on axisymmetric free vibrations of moderately thick circular functionally graded plate integrated with piezoelectric layers. J Mech Sci Technol 2008; 22(6): 1058-1072.
[29] Lal R, Rani R. On radially symmetric vibrations of circular sandwich plates of non-uniform thickness. Int J Mech Sci 2015; 99: 29-39.
[30] Reddy JN. Mechanics of Laminated Composite Plates and Shells, Theory and Application. CRC Press, New York, 2003.
[31] Mohammadi, Y. and Rahmani, M., 2020. Temperature-Dependent Buckling Analysis of Functionally Graded Sandwich Cylinders. Journal of Solid Mechanics, 12(1).
[32] Kiani Y, Eslami MR. Instability of heated circular FGM plates on a partial Winkler-type foundation, Acta Mech 2013; 224(5): 1045-1060.
[33] Kim YW. Temperature dependent vibration analysis of functionally graded rectangular plates, J Sound Vib 2005; 284(3-5): 531-549.
[34] Es'haghi M, Hashemi SH, Fadaee M. Vibration analysis of piezoelectric FGM sensors using an accurate method, Int J Mech Sci 2011; 53(8): 585-594.
[35] Rahmani, M., Mohammadi, Y., Kakavand, F. and Raeisifard, H., 2019. Buckling analysis of truncated conical sandwich panel with porous functionally graded core in different thermal conditions. Amirkabir Journal of Mechanical Engineering, 52(10), pp.2859-2878.
[36] Rahmani, M., 2023. Nonlinear buckling analysis of clamped-free porous FG sandwich beams with temperature dependent materials. Analytical and Numerical Methods in Mechanical Design, 3(1), p.37.
[37] Wu TY, Wang YY, Liu GR. Free vibration analysis of circular plates using generalized differential quadrature rule. Comput Method Appl M 2002; 191(46): 5365-5380.