S

• sadegh amalnik.Morteza Expert System Approach for Manufacturability Evaluation of Nd: YAG Laser Beam Machining Process [ Vol.10, Issue 2 - Spring Year 2017]
• Saeedi.Mina Synthesis of B4C - Nano TiB2 Composite Nano Powder by the Chemical Precipitation Method [ Vol.10, Issue 4 - Autumn Year 2017]
• Sajedipour.Davood Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature [ Vol.10, Issue 2 - Spring Year 2017]
• salimi.aydin Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [ Vol.10, Issue 4 - Autumn Year 2017]
• Sam Daliri.Omid Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure [ Vol.10, Issue 2 - Spring Year 2017]
• Sattar.S. Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process [ Vol.10, Issue 2 - Spring Year 2017]
• Sayah Badkhor.Mostafa Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate [ Vol.10, Issue 2 - Spring Year 2017]
• Sazesh.Sina Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation [ Vol.10, Issue 1 - Winter Year 2017]
• Seidi.Esmaeil Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [ Vol.10, Issue 4 - Autumn Year 2017]
• Seyedkashi.Seyed Mohammad Hossein Experimental Investigation of Effective Parameters on a New Incremental Tube Bulging Method Using Rotary Tool [ Vol.10, Issue 2 - Spring Year 2017]
• Seyfali.Ehsan Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method [ Vol.10, Issue 4 - Autumn Year 2017]
• Shabani.A. Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining [ Vol.10, Issue 1 - Winter Year 2017]
• shadkam.amin Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [ Vol.10, Issue 4 - Autumn Year 2017]
• Shahrajabian.H. Experimental Investigation of Incremental Forming Process of Bilayer Hybrid Brass/St13 Sheets [ Vol.10, Issue 3 - Summer Year 2017]
• Shahriari.Behrooz Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method [ Vol.10, Issue 4 - Autumn Year 2017]
• Shalvandi.M. Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear [ Vol.10, Issue 4 - Autumn Year 2017]
• Shariati.M Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method [ Vol.10, Issue 3 - Summer Year 2017]
• Sharifi Tashnizi.Ebrahim Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process [ Vol.10, Issue 2 - Spring Year 2017]
• Shirbakht.Faezeh Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate [ Vol.10, Issue 2 - Spring Year 2017]
• Shirneshan.Alireza Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini) [ Vol.10, Issue 4 - Autumn Year 2017]
• Soury.Ehsan Flow Study of Wood Plastic Composite Through a Circular Die in an Extrusion Process [ Vol.10, Issue 2 - Spring Year 2017]