A

• Abdi Behnagh.Reza Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [ Vol.11, Issue 4 - Autumn Year 2024]
• Abdollahi.Hadi An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments [ Vol.11, Issue 2 - Spring Year 2024]
• Adami.Mahmood The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [ Vol.11, Issue 2 - Spring Year 2024]
• Adeleye.Olurotimi Picard Iteration Method to Kinetic Analysis of Thermal Inactivation of Enzyme as Applied in Biotechnology [ Vol.11, Issue 4 - Autumn Year 2024]
• Afsharjahanshahi.Mozafar Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [ Vol.11, Issue 4 - Autumn Year 2024]
• Agha Seyed Mirzabozorg.Mohsen The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [ Vol.11, Issue 2 - Spring Year 2024]
• Aghanajafi.Cyros Transient Analysis of Heat and Mass Transfer via Natural Convection over a Vertical Complex Wavy Surface [ Vol.11, Issue 1 - Winter Year 2024]
• Ahmadi Broughani.Sayed Yoosef Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite [ Vol.11, Issue 4 - Autumn Year 2024]
• Ahmadi.Afshin Thermal Optimization of an Array of Needle-Shaped using Constructal Theory [ Vol.11, Issue 3 - Summer Year 2024]
• Ahmadi.Babak Numerical Investigation on Heat Transfer and Performance Number of Nanofluid Flow inside a Double Pipe Heat Exchanger Filled with Porous Media [ Vol.11, Issue 4 - Autumn Year 2024]
• Alipour.Roozbeh Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study [ Vol.11, Issue 4 - Autumn Year 2024]
• amini.kamran Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints [ Vol.11, Issue 1 - Winter Year 2024]
• Amini.Saeid Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process [ Vol.11, Issue 4 - Autumn Year 2024]
• Aminian.Ehsan Numerical Investigation on Heat Transfer and Performance Number of Nanofluid Flow inside a Double Pipe Heat Exchanger Filled with Porous Media [ Vol.11, Issue 4 - Autumn Year 2024]
• Aminzadeh.Nasrin Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [ Vol.11, Issue 3 - Summer Year 2024]
• Amiri.MohammadMahdi Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates [ Vol.11, Issue 1 - Winter Year 2024]
• Ansari.Ali Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN) [ Vol.11, Issue 4 - Autumn Year 2024]
• Asghari.Mansour The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor [ Vol.11, Issue 2 - Spring Year 2024]
• Ashrafi Tafreshi.َAmin Experimental Investigation of the Formability Improvement of Brass 260 and Al5182-O in Various Strain Rate using Hydrodynamic and Electrohydraulic Forming Methods [ Vol.11, Issue 4 - Autumn Year 2024]
• Atashafrooz.Meysam Geometrical Effects of Duct on the Entropy Generation in the Laminar Forced Convection Separated Flow [ Vol.11, Issue 3 - Summer Year 2024]
• Atrian.Amir Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique [ Vol.11, Issue 1 - Winter Year 2024]
• Azizzadeh.Turaj Combining Magnetic Flux Leakage and Optical Inspection Technique for Identification of Nearby Pittings [ Vol.11, Issue 4 - Autumn Year 2024]